View Full Version : USB-UIRT AT&T Uverse TV Motorola VIP1200 IR Codes
05-07-2008, 11:01 PM
For those of us who are using AT&T Uverse TV, attached are the USB-UIRT IR Codes for the Motorola VIP1200.
Just unzip the file into:
c$\Program Files\SageTV\Common\RemoteCodes\USB-UIRT Transceiver.
You will need to restart the SageTV service in order to see it as an option.
06-07-2008, 07:51 AM
Thanks for the IR codes. I have a question, are you getting guide data for U-Verse in SageTV? If yes, how are you doing it? It is not showing the U-verse lineup in the guide setup when I enter my zip code.
08-25-2008, 04:40 PM
I recently installed 2 Uverse STBs with SageTV where each STB is controlled via a single USB-UIRT. So from my setup, here is an updated copy of the AT&T Uverse TV USB-UIRT IR Codes for the Motorola VIP1200 with separate files for each zone.
The attached zip file contains 4 IR files:
MotorolaVIP1200.ir - sends IR signals on all zones of the USB-UIRT
MotorolaVIP1200_1.ir - sends IR signals on zone 1 of the USB-UIRT (1/8" mini)
MotorolaVIP1200_2.ir - sends IR signals on zone 2 of the USB-UIRT (1/8" mini)
MotorolaVIP1200_3.ir - sends IR signals on zone 3 of the USB-UIRT (blaster)
(Included in these IR files)
The number of channel digits is set to 4, the repeat count is 0, the delay between digits is 1 ms, and the delay between channel changes is 500 ms. These settings have achieved very fast channel changes for my setup ~ your mileage may vary :-)
vBulletin® v3.7.6, Copyright ©2000-2013, Jelsoft Enterprises Ltd.