Opus4
02-09-2009, 10:22 PM
Last updated: July 30, 2010, for firmware 20100730 0
It is possible to customize the STP-HD200's Media Player (standalone) UI by using Studio on a PC installation of SageTV to modify the interface.
To use Studio, see the Studio Information Resources.
Get the Base STV for the STP-HD200
Easiest way - download the zipped files:
To modify the existing HD200 UI, first download the following zip file containing the STV and its support files:
HD200STVFiles.zip (http://download.sage.tv/firmware/HD200STVFiles.zip)
You can unzip this in your SageTV installation directory to create a working location for it -- unzip the file in the existing "STVs" subdirectory where SageTV has been installed, being sure to preserve the folder structure contained in the zip file. This will create a subdirectory named "Cheetah".
Or, copy the files from the HD200:
Telnet into the HD200 (login as 'root', no password). The HD200's STV is found in /sage/STVs/Cheetah. You will need to copy that entire folder tree if you wish to modify & use the STV from a different location, or you will have problems when trying to access the support files it needs (images & so on).
The files can be copied to a USB drive, which is mounted as a subfolder of /tmp/external. You could copy the STV files to your USB drive's subfolder.
Edit the Base STV
The file to be loaded and edited in Studio is named "Cheetah.opt.stv". You may want to use Studio's File -> Save As option to save the file as an STV file with the .xml extension to help separate your working copy from the STV that can be used on the HD200.
When you are ready to test your edits on the HD200, use Studio's File -> "Save A Copy As..." option to save the file with a name ending in .opt.stv. This saves the file in a special format required for loading the STV on the HD200. Note: If you do not use the Save A Copy As option or do not use the .opt.stv extension, the file will not be loadable on the HD200.
Prepare to use the STV on the HD200
Copy the entire Cheetah directory tree to either a USB drive to be attached to the HD200 or to a network location that the HD200 has access to. Tip: The HD200 can access a drive on your networked PC if a directory on that drive has been added as an import directory on the HD200.
Note: You must copy all the files because the support files (graphics & so on) will be expected to be found in the directory tree in and below the directory where the .opt.stv file is located.
Load the STV on the HD200
After editing & copying the new .opt.stv file and its support files, follow these steps to load the STV on the HD200 when used as a Media Player (not connected to a SageTV server):
Plug the USB drive into the HD200, or make sure the network path is accessible to the HD200.
From the HD200's Main Menu, go to Settings -> System Information (or just use the Info command while on the Main Menu). Using the remote, enter the 4-digit '5309' code. If entered successfully, you will see a blue dot in the top left corner.
From the HD200's Main Menu, go to Settings -> Advanced Setup -> Advanced -> SageTV Application Package. Load the STV...
For a USB drive, use Up Directory to get to "/", then go to tmp/external/<name of the USB drive>, then navigate to the path where the .opt.stv file is located and load it.
For a network location, use Up Directory to get to "/", then go to tmp/sagetv_shares, then navigate to the path where the .opt.stv file is located and load it.
If your edits have created a problem and you need to recover to the original STV, simply remove the USB drive or rename the network path location and reboot the HD200. When it can't find the custom STV file, it will revert to the original STV.
Let me know if you run into any problems with the above instructions or have questions about some part that isn't clear.
- Andy
It is possible to customize the STP-HD200's Media Player (standalone) UI by using Studio on a PC installation of SageTV to modify the interface.
To use Studio, see the Studio Information Resources.
Get the Base STV for the STP-HD200
Easiest way - download the zipped files:
To modify the existing HD200 UI, first download the following zip file containing the STV and its support files:
HD200STVFiles.zip (http://download.sage.tv/firmware/HD200STVFiles.zip)
You can unzip this in your SageTV installation directory to create a working location for it -- unzip the file in the existing "STVs" subdirectory where SageTV has been installed, being sure to preserve the folder structure contained in the zip file. This will create a subdirectory named "Cheetah".
Or, copy the files from the HD200:
Telnet into the HD200 (login as 'root', no password). The HD200's STV is found in /sage/STVs/Cheetah. You will need to copy that entire folder tree if you wish to modify & use the STV from a different location, or you will have problems when trying to access the support files it needs (images & so on).
The files can be copied to a USB drive, which is mounted as a subfolder of /tmp/external. You could copy the STV files to your USB drive's subfolder.
Edit the Base STV
The file to be loaded and edited in Studio is named "Cheetah.opt.stv". You may want to use Studio's File -> Save As option to save the file as an STV file with the .xml extension to help separate your working copy from the STV that can be used on the HD200.
When you are ready to test your edits on the HD200, use Studio's File -> "Save A Copy As..." option to save the file with a name ending in .opt.stv. This saves the file in a special format required for loading the STV on the HD200. Note: If you do not use the Save A Copy As option or do not use the .opt.stv extension, the file will not be loadable on the HD200.
Prepare to use the STV on the HD200
Copy the entire Cheetah directory tree to either a USB drive to be attached to the HD200 or to a network location that the HD200 has access to. Tip: The HD200 can access a drive on your networked PC if a directory on that drive has been added as an import directory on the HD200.
Note: You must copy all the files because the support files (graphics & so on) will be expected to be found in the directory tree in and below the directory where the .opt.stv file is located.
Load the STV on the HD200
After editing & copying the new .opt.stv file and its support files, follow these steps to load the STV on the HD200 when used as a Media Player (not connected to a SageTV server):
Plug the USB drive into the HD200, or make sure the network path is accessible to the HD200.
From the HD200's Main Menu, go to Settings -> System Information (or just use the Info command while on the Main Menu). Using the remote, enter the 4-digit '5309' code. If entered successfully, you will see a blue dot in the top left corner.
From the HD200's Main Menu, go to Settings -> Advanced Setup -> Advanced -> SageTV Application Package. Load the STV...
For a USB drive, use Up Directory to get to "/", then go to tmp/external/<name of the USB drive>, then navigate to the path where the .opt.stv file is located and load it.
For a network location, use Up Directory to get to "/", then go to tmp/sagetv_shares, then navigate to the path where the .opt.stv file is located and load it.
If your edits have created a problem and you need to recover to the original STV, simply remove the USB drive or rename the network path location and reboot the HD200. When it can't find the custom STV file, it will revert to the original STV.
Let me know if you run into any problems with the above instructions or have questions about some part that isn't clear.
- Andy