[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-27-generic (buildd@palmer) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Fri Mar 12 01:10:31 UTC 2010 (Ubuntu 2.6.24-27.68-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5650 [ 0.000000] Entering add_active_range(0, 0, 524000) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524000 [ 0.000000] On node 0 totalpages: 524000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292323 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7060 checksum 0 [ 0.000000] ACPI: RSDP 000F7060, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT 7FEE3000, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP 7FEE3040, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: DSDT 7FEE30C0, 7351 (r1 GBT GBTUACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS 7FEE0000, 0040 [ 0.000000] ACPI: SSDT 7FEEA500, 0544 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET 7FEEAA80, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) [ 0.000000] ACPI: MCFG 7FEEAAC0, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: TAMG 7FEEAB00, 038A (r1 GBT GBT B0 5455312E BG 53450101) [ 0.000000] ACPI: APIC 7FEEA440, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 0:2 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 0:2 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] Processor #2 0:2 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] Processor #3 0:2 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519907 [ 0.000000] Kernel command line: root=UUID=af0120b6-37ae-49ae-af95-18e66bed83df ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2511.443 MHz processor. [ 16.082834] Console: colour VGA+ 80x25 [ 16.082837] console [tty0] enabled [ 16.083004] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 16.083227] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 16.135776] Memory: 2066064k/2096000k available (2182k kernel code, 28796k reserved, 1005k data, 368k init, 1178496k highmem) [ 16.135781] virtual kernel memory layout: [ 16.135782] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 16.135783] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 16.135784] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 16.135784] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 16.135785] .init : 0xc0423000 - 0xc047f000 ( 368 kB) [ 16.135786] .data : 0xc03218ca - 0xc041cdc4 (1005 kB) [ 16.135787] .text : 0xc0100000 - 0xc03218ca (2182 kB) [ 16.135789] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 16.135814] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 16.135928] hpet clockevent registered [ 16.135949] Calibrating delay loop (skipped), using tsc calculated value.. 5022.88 BogoMIPS (lpj=10045772) [ 16.135963] Security Framework initialized [ 16.135967] SELinux: Disabled at boot. [ 16.135976] AppArmor: AppArmor initialized [ 16.135979] Failure registering capabilities with primary security module. [ 16.135985] Mount-cache hash table entries: 512 [ 16.136067] Initializing cgroup subsys ns [ 16.136070] Initializing cgroup subsys cpuacct [ 16.136077] CPU: After generic identify, caps: 178bfbff efd3fbff 00000000 00000000 00802009 00000000 000007ff 00000000 [ 16.136083] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.136085] CPU: L2 Cache: 512K (64 bytes/line) [ 16.136087] CPU 0(4) -> Core 0 [ 16.136089] CPU: After all inits, caps: 178bfbff efd3fbff 00000000 00020510 00802001 00000000 000007ff 00000000 [ 16.136095] Compat vDSO mapped to ffffe000. [ 16.136102] Checking 'hlt' instruction... OK. [ 16.152108] SMP alternatives: switching to UP code [ 16.152942] Early unpacking initramfs... done [ 16.382107] ACPI: Core revision 20070126 [ 16.382164] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 16.399099] CPU0: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 [ 16.399114] SMP alternatives: switching to SMP code [ 16.399487] Booting processor 1/1 eip 3000 [ 16.409620] Initializing CPU#1 [ 16.487277] Calibrating delay using timer specific routine.. 5022.71 BogoMIPS (lpj=10045425) [ 16.487282] CPU: After generic identify, caps: 178bfbff efd3fbff 00000000 00000000 00802009 00000000 000007ff 00000000 [ 16.487287] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.487288] CPU: L2 Cache: 512K (64 bytes/line) [ 16.487290] CPU 1(4) -> Core 1 [ 16.487292] CPU: After all inits, caps: 178bfbff efd3fbff 00000000 00020510 00802001 00000000 000007ff 00000000 [ 16.487587] CPU1: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 [ 16.487600] SMP alternatives: switching to SMP code [ 16.487866] Booting processor 2/2 eip 3000 [ 16.497993] Initializing CPU#2 [ 16.575114] Calibrating delay using timer specific routine.. 5022.71 BogoMIPS (lpj=10045427) [ 16.575119] CPU: After generic identify, caps: 178bfbff efd3fbff 00000000 00000000 00802009 00000000 000007ff 00000000 [ 16.575124] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.575125] CPU: L2 Cache: 512K (64 bytes/line) [ 16.575127] CPU 2(4) -> Core 3 [ 16.575129] CPU: After all inits, caps: 178bfbff efd3fbff 00000000 00020510 00802001 00000000 000007ff 00000000 [ 16.575467] CPU2: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 [ 16.575481] SMP alternatives: switching to SMP code [ 16.575731] Booting processor 3/3 eip 3000 [ 16.585857] Initializing CPU#3 [ 16.662951] Calibrating delay using timer specific routine.. 5022.70 BogoMIPS (lpj=10045404) [ 16.662957] CPU: After generic identify, caps: 178bfbff efd3fbff 00000000 00000000 00802009 00000000 000007ff 00000000 [ 16.662961] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.662962] CPU: L2 Cache: 512K (64 bytes/line) [ 16.662964] CPU 3(4) -> Core 2 [ 16.662966] CPU: After all inits, caps: 178bfbff efd3fbff 00000000 00020510 00802001 00000000 000007ff 00000000 [ 16.663332] CPU3: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 [ 16.663343] Total of 4 processors activated (20091.01 BogoMIPS). [ 16.663607] ENABLING IO-APIC IRQs [ 16.663811] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 16.810817] Brought up 4 CPUs [ 16.810867] CPU0 attaching sched-domain: [ 16.810869] domain 0: span 0f [ 16.810870] groups: 01 02 04 08 [ 16.810873] CPU1 attaching sched-domain: [ 16.810874] domain 0: span 0f [ 16.810875] groups: 02 04 08 01 [ 16.810877] CPU2 attaching sched-domain: [ 16.810878] domain 0: span 0f [ 16.810879] groups: 04 08 01 02 [ 16.810882] CPU3 attaching sched-domain: [ 16.810883] domain 0: span 0f [ 16.810884] groups: 08 01 02 04 [ 16.811055] net_namespace: 64 bytes [ 16.811061] Booting paravirtualized kernel on bare hardware [ 16.811416] Time: 17:09:32 Date: 04/27/10 [ 16.811434] NET: Registered protocol family 16 [ 16.811547] EISA bus registered [ 16.811550] ACPI: bus type pci registered [ 16.812715] PCI: PCI BIOS revision 3.00 entry at 0xfbb60, last bus=3 [ 16.812717] PCI: Using configuration type 1 [ 16.812725] Setting up standard PCI resources [ 16.816432] ACPI: EC: Look up EC in DSDT [ 16.821824] ACPI: Interpreter enabled [ 16.821829] ACPI: (supports S0 S3 S4 S5) [ 16.821841] ACPI: Using IOAPIC for interrupt routing [ 16.826098] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 16.826261] pci 0000:00:11.0: set SATA to AHCI mode [ 16.827304] PCI: Transparent bridge - 0000:00:14.4 [ 16.827324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 16.827526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 16.827611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 16.827685] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 16.845550] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.845646] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.845733] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.845821] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.845912] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.846009] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.846101] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.846188] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 16.846282] Linux Plug and Play Support v0.97 (c) Adam Belay [ 16.846300] pnp: PnP ACPI init [ 16.846304] ACPI: bus type pnp registered [ 16.848600] pnp: PnP ACPI: found 14 devices [ 16.848602] ACPI: ACPI bus type pnp unregistered [ 16.848604] PnPBIOS: Disabled by ACPI PNP [ 16.848730] PCI: Using ACPI for IRQ routing [ 16.848732] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 16.848739] PCI: Cannot allocate resource region 3 of device 0000:00:00.0 [ 16.922496] NET: Registered protocol family 8 [ 16.922497] NET: Registered protocol family 20 [ 16.922520] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 16.922523] hpet0: 4 32-bit timers, 14318180 Hz [ 16.923552] AppArmor: AppArmor Filesystem Enabled [ 16.926484] Time: hpet clocksource has been installed. [ 16.926495] Switched to high resolution mode on CPU 0 [ 16.926559] Switched to high resolution mode on CPU 1 [ 16.926580] Switched to high resolution mode on CPU 2 [ 16.926620] Switched to high resolution mode on CPU 3 [ 16.934468] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 16.934470] system 00:01: ioport range 0x220-0x225 has been reserved [ 16.934472] system 00:01: ioport range 0x290-0x294 has been reserved [ 16.934476] system 00:02: ioport range 0x4100-0x411f has been reserved [ 16.934478] system 00:02: ioport range 0x228-0x22f has been reserved [ 16.934480] system 00:02: ioport range 0x40b-0x40b has been reserved [ 16.934482] system 00:02: ioport range 0x4d6-0x4d6 has been reserved [ 16.934484] system 00:02: ioport range 0xc00-0xc01 has been reserved [ 16.934485] system 00:02: ioport range 0xc14-0xc14 has been reserved [ 16.934487] system 00:02: ioport range 0xc50-0xc52 has been reserved [ 16.934489] system 00:02: ioport range 0xc6c-0xc6d has been reserved [ 16.934491] system 00:02: ioport range 0xc6f-0xc6f has been reserved [ 16.934493] system 00:02: ioport range 0xcd0-0xcd1 has been reserved [ 16.934495] system 00:02: ioport range 0xcd2-0xcd3 has been reserved [ 16.934497] system 00:02: ioport range 0xcd4-0xcdf has been reserved [ 16.934499] system 00:02: ioport range 0x4000-0x40fe has been reserved [ 16.934501] system 00:02: ioport range 0x4210-0x4217 has been reserved [ 16.934503] system 00:02: ioport range 0xb00-0xb0f has been reserved [ 16.934505] system 00:02: ioport range 0xb10-0xb1f has been reserved [ 16.934507] system 00:02: ioport range 0xb20-0xb3f has been reserved [ 16.934513] system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved [ 16.934517] system 00:0d: iomem range 0xcf200-0xcffff has been reserved [ 16.934519] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved [ 16.934525] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 16.934527] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 16.934529] system 00:0d: iomem range 0x7fee0000-0x7fefffff could not be reserved [ 16.934531] system 00:0d: iomem range 0xffff0000-0xffffffff could not be reserved [ 16.934533] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 16.934535] system 00:0d: iomem range 0x100000-0x7fedffff could not be reserved [ 16.934537] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 16.934540] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved [ 16.934542] system 00:0d: iomem range 0xfff80000-0xfffeffff could not be reserved [ 16.964743] PCI: Bridge: 0000:00:02.0 [ 16.964745] IO window: e000-efff [ 16.964747] MEM window: fdf00000-fdffffff [ 16.964749] PREFETCH window: d0000000-dfffffff [ 16.964752] PCI: Bridge: 0000:00:0a.0 [ 16.964753] IO window: d000-dfff [ 16.964756] MEM window: fde00000-fdefffff [ 16.964758] PREFETCH window: fdc00000-fdcfffff [ 16.964760] PCI: Bridge: 0000:00:14.4 [ 16.964762] IO window: c000-cfff [ 16.964766] MEM window: fdd00000-fddfffff [ 16.964770] PREFETCH window: f8000000-fbffffff [ 16.964785] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 18 (level, low) -> IRQ 16 [ 16.964789] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 16.964794] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 16 [ 16.964797] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 16.964810] NET: Registered protocol family 2 [ 17.002362] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 17.002544] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 17.002954] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 17.003167] TCP: Hash tables configured (established 131072 bind 65536) [ 17.003169] TCP reno registered [ 17.014398] checking if image is initramfs... it is [ 17.458784] Freeing initrd memory: 7334k freed [ 17.459682] audit: initializing netlink socket (disabled) [ 17.459692] audit(1272388172.212:1): initialized [ 17.459838] highmem bounce pool size: 64 pages [ 17.461308] VFS: Disk quotas dquot_6.5.1 [ 17.461362] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 17.461449] io scheduler noop registered [ 17.461451] io scheduler anticipatory registered [ 17.461452] io scheduler deadline registered [ 17.461459] io scheduler cfq registered (default) [ 17.601238] Boot video device is 0000:01:00.0 [ 17.601358] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 17.601378] assign_interrupt_mode Found MSI capability [ 17.601396] Allocate Port Service[0000:00:02.0:pcie00] [ 17.601442] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 17.601458] assign_interrupt_mode Found MSI capability [ 17.601473] Allocate Port Service[0000:00:0a.0:pcie00] [ 17.601635] isapnp: Scanning for PnP cards... [ 17.954797] isapnp: No Plug & Play device found [ 17.976008] Real Time Clock Driver v1.12ac [ 17.976128] hpet_resources: 0xfed00000 is busy [ 17.976159] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 17.976277] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.976896] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.977426] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.977472] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 17.977538] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 17.977899] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.977904] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.993510] mice: PS/2 mouse device common for all mice [ 17.993603] EISA: Probing bus 0 at eisa.0 [ 17.993619] Cannot allocate resource for EISA slot 4 [ 17.993635] EISA: Detected 0 cards. [ 17.993636] cpuidle: using governor ladder [ 17.993638] cpuidle: using governor menu [ 17.993709] NET: Registered protocol family 1 [ 17.993730] Using IPI No-Shortcut mode [ 17.993753] registered taskstats version 1 [ 17.993842] Magic number: 6:436:189 [ 17.993869] hash matches device ttys1 [ 17.993913] hash matches device device:1b [ 17.993923] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 17.993924] EDD information not available. [ 17.994026] Freeing unused kernel memory: 368k freed [ 17.994044] Write protecting the kernel read-only data: 803k [ 18.017459] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 19.121661] fuse init (API version 7.9) [ 19.327654] SCSI subsystem initialized [ 19.332919] r8169 Gigabit Ethernet driver 2.2LK loaded [ 19.332937] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 16 [ 19.332950] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 19.333152] eth0: RTL8168c/8111c at 0xf884e000, 6c:f0:49:73:db:73, XID 3c4000c0 IRQ 221 [ 19.333548] usbcore: registered new interface driver usbfs [ 19.333564] usbcore: registered new interface driver hub [ 19.335106] libata version 3.00 loaded. [ 19.336105] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 19.336140] ACPI: PCI interrupt for device 0000:00:14.1 disabled [ 19.338401] usbcore: registered new device driver usb [ 19.340120] ahci 0000:00:11.0: version 3.0 [ 19.340148] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 22 (level, low) -> IRQ 18 [ 19.340165] ahci 0000:00:11.0: controller can't do PMP, turning off CAP_PMP [ 19.343154] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 20.340046] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 20.340050] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pio slum part [ 20.340243] scsi0 : ahci [ 20.340399] scsi1 : ahci [ 20.340492] scsi2 : ahci [ 20.340584] scsi3 : ahci [ 20.340641] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 18 [ 20.340644] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 18 [ 20.340648] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 18 [ 20.340650] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 18 [ 20.815116] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 20.816098] ata1.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133 [ 20.816102] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 20.817183] ata1.00: configured for UDMA/133 [ 21.290220] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 21.448062] ata2.00: ATAPI: ASUS DRW-24B1ST, 1.01, max UDMA/100, ATAPI AN [ 21.603937] ata2.00: configured for UDMA/100 [ 21.913036] ata3: SATA link down (SStatus 0 SControl 300) [ 22.224439] ata4: SATA link down (SStatus 0 SControl 300) [ 22.224514] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5 [ 22.226925] scsi 1:0:0:0: CD-ROM ASUS DRW-24B1ST 1.01 PQ: 0 ANSI: 5 [ 22.227040] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 22.227049] ACPI: PCI Interrupt 0000:03:0e.0[A] -> GSI 22 (level, low) -> IRQ 18 [ 22.227055] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 22.227249] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 22.227269] ohci_hcd 0000:00:12.0: irq 17, io mem 0xfe02e000 [ 22.276690] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fddff000-fddff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 22.289383] usb usb1: configuration #1 chosen from 1 choice [ 22.289400] hub 1-0:1.0: USB hub found [ 22.289406] hub 1-0:1.0: 3 ports detected [ 22.389168] ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 22.389176] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 22.389192] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2 [ 22.389203] ohci_hcd 0000:00:12.1: irq 17, io mem 0xfe02d000 [ 22.448051] usb usb2: configuration #1 chosen from 1 choice [ 22.448064] hub 2-0:1.0: USB hub found [ 22.448069] hub 2-0:1.0: 3 ports detected [ 22.551857] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 16 [ 22.551864] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 22.551876] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3 [ 22.551890] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02b000 [ 22.611743] usb usb3: configuration #1 chosen from 1 choice [ 22.611757] hub 3-0:1.0: USB hub found [ 22.611762] hub 3-0:1.0: 3 ports detected [ 22.715543] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 18 (level, low) -> IRQ 16 [ 22.715549] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 22.715565] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4 [ 22.715574] ohci_hcd 0000:00:13.1: irq 16, io mem 0xfe02a000 [ 22.776429] usb usb4: configuration #1 chosen from 1 choice [ 22.776443] hub 4-0:1.0: USB hub found [ 22.776448] hub 4-0:1.0: 3 ports detected [ 22.880234] ACPI: PCI Interrupt 0000:00:14.5[C] -> GSI 18 (level, low) -> IRQ 16 [ 22.880242] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 22.880256] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5 [ 22.880266] ohci_hcd 0000:00:14.5: irq 16, io mem 0xfe028000 [ 22.939117] usb usb5: configuration #1 chosen from 1 choice [ 22.939129] hub 5-0:1.0: USB hub found [ 22.939134] hub 5-0:1.0: 2 ports detected [ 23.043004] ACPI: PCI Interrupt 0000:00:12.2[B] -> GSI 17 (level, low) -> IRQ 19 [ 23.043015] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 23.043041] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 6 [ 23.043070] ehci_hcd 0000:00:12.2: debug port 1 [ 23.043081] ehci_hcd 0000:00:12.2: irq 19, io mem 0xfe02c000 [ 23.192103] usb 4-1: new full speed USB device using ohci_hcd and address 2 [ 23.202586] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.202662] usb usb6: configuration #1 chosen from 1 choice [ 23.202679] hub 6-0:1.0: USB hub found [ 23.202683] hub 6-0:1.0: 6 ports detected [ 23.306442] ACPI: PCI Interrupt 0000:00:13.2[B] -> GSI 19 (level, low) -> IRQ 20 [ 23.306454] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 23.306469] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 7 [ 23.306497] ehci_hcd 0000:00:13.2: debug port 1 [ 23.306508] ehci_hcd 0000:00:13.2: irq 20, io mem 0xfe029000 [ 23.398207] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.398270] usb usb7: configuration #1 chosen from 1 choice [ 23.398284] hub 7-0:1.0: USB hub found [ 23.398287] hub 7-0:1.0: 6 ports detected [ 23.503638] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 23.504322] scsi4 : pata_atiixp [ 23.504361] scsi5 : pata_atiixp [ 23.504960] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 23.504962] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 23.515780] Driver 'sd' needs updating - please use bus_type methods [ 23.515837] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 23.515845] sd 0:0:0:0: [sda] Write Protect is off [ 23.515846] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.515856] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.515888] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 23.515893] sd 0:0:0:0: [sda] Write Protect is off [ 23.515895] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.515903] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.515905] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 23.535948] sda1 sda2 <<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0036ba2e006cf049] [ 23.567860] sda5 > sda3 [ 23.567938] sd 0:0:0:0: [sda] Attached SCSI disk [ 23.571270] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.571283] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 23.577286] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 23.577289] Uniform CD-ROM driver Revision: 3.20 [ 23.577317] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 23.794456] usb 4-1: device not accepting address 2, error -62 [ 23.840504] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 23.840508] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 23.898789] Attempting manual resume [ 23.898792] swsusp: Resume From Partition 8:5 [ 23.898793] PM: Checking swsusp image. [ 23.898920] PM: Resume from disk failed. [ 23.931853] kjournald starting. Commit interval 5 seconds [ 23.931857] EXT3-fs: mounted filesystem with ordered data mode. [ 24.216661] usb 7-4: new high speed USB device using ehci_hcd and address 2 [ 24.350848] usb 7-4: configuration #1 chosen from 1 choice [ 24.350932] hub 7-4:1.0: USB hub found [ 24.351035] hub 7-4:1.0: 7 ports detected [ 24.653221] usb 7-4.2: new full speed USB device using ehci_hcd and address 3 [ 24.751342] usb 7-4.2: configuration #1 chosen from 1 choice [ 24.952519] usb 7-4.3: new high speed USB device using ehci_hcd and address 4 [ 25.046271] usb 7-4.3: configuration #1 chosen from 1 choice [ 28.679311] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 28.730094] Linux agpgart interface v0.102 [ 28.788183] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 28.789323] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 28.800411] input: Power Button (FF) as /devices/virtual/input/input3 [ 28.865354] ACPI: Power Button (FF) [PWRF] [ 28.865399] input: Power Button (CM) as /devices/virtual/input/input4 [ 28.929254] ACPI: Power Button (CM) [PWRB] [ 28.929341] ACPI: WMI-Acer: Mapper loaded [ 29.134649] Linux video capture interface: v2.00 [ 29.148148] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 29.151453] r8169: eth0: link up [ 29.151458] r8169: eth0: link up [ 29.220208] usbcore: registered new interface driver libusual [ 29.237508] usbcore: registered new interface driver usbserial [ 29.237519] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [ 29.237540] usbcore: registered new interface driver usbserial_generic [ 29.237541] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 29.299173] Initializing USB Mass Storage driver... [ 29.300731] scsi6 : SCSI emulation for USB Mass Storage devices [ 29.301341] usbcore: registered new interface driver usb-storage [ 29.301343] USB Mass Storage support registered. [ 29.301347] usb-storage: device found at 4 [ 29.301349] usb-storage: waiting for device to settle before scanning [ 29.335972] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device [ 29.335994] ftdi_sio 7-4.2:1.0: FTDI USB Serial Device converter detected [ 29.336013] /build/buildd/linux-2.6.24/drivers/usb/serial/ftdi_sio.c: Detected FT232RL [ 29.336087] usb 7-4.2: FTDI USB Serial Device converter now attached to ttyUSB0 [ 29.336094] usbcore: registered new interface driver ftdi_sio [ 29.336096] /build/buildd/linux-2.6.24/drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver [ 29.368327] ivtv: Start initialization, version 1.1.0 [ 29.368390] ivtv0: Initializing card #0 [ 29.368392] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 29.368464] ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 29.368474] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 29.428022] tveeprom 1-0050: Hauppauge model 26152, rev F1B2, serial# 10340991 [ 29.428025] tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 50) [ 29.428028] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) [ 29.428029] tveeprom 1-0050: audio processor is CX25843 (idx 37) [ 29.428031] tveeprom 1-0050: decoder processor is CX25843 (idx 30) [ 29.428033] tveeprom 1-0050: has no radio, has IR receiver, has IR transmitter [ 29.428035] ivtv0: Autodetected Hauppauge WinTV PVR-150 [ 29.428036] ivtv0: Reopen i2c bus for IR-blaster support [ 29.459915] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 29.482657] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17 [ 29.513727] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 29.530473] parport_pc 00:09: reported by Plug and Play ACPI [ 29.530582] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 29.625429] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 29.643237] NET: Registered protocol family 10 [ 29.643407] lo: Disabled Privacy Extensions [ 29.901973] cx25840 1-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) [ 29.917029] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 29.930349] tuner-simple 1-0061: type set to 50 (TCL 2002N) [ 29.930351] tuner 1-0061: type set to TCL 2002N [ 29.930534] ivtv0: Registered device video0 for encoder MPG (4096 kB) [ 29.930547] ivtv0: Registered device video32 for encoder YUV (2048 kB) [ 29.930560] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) [ 29.930572] ivtv0: Registered device video24 for encoder PCM (320 kB) [ 29.930574] ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 [ 29.930588] ivtv: End initialization [ 29.930619] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 19 (level, low) -> IRQ 20 [ 29.930634] PCI: Setting latency timer of device 0000:01:00.1 to 64 [ 30.157769] loop: module loaded [ 30.169206] lp0: using parport0 (interrupt-driven). [ 30.226719] i2c /dev entries driver [ 30.263294] Adding 6072528k swap on /dev/sda5. Priority:-1 extents:1 across:6072528k [ 30.799634] EXT3 FS on sda1, internal journal [ 31.482714] kjournald starting. Commit interval 5 seconds [ 31.482960] EXT3 FS on sda3, internal journal [ 31.482965] EXT3-fs: mounted filesystem with ordered data mode. [ 31.798259] ip_tables: (C) 2000-2006 Netfilter Core Team