![]() |
|
|||||||
| Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
|
|||
|
|||
|
Smears with PVR250 and HDHomeRun
I'm currently running 2 PVR250s with a HDHomeRun. If I have the SageTV_HDHomeRun manager running, I notice a "smear" in recordings on the PVRs. If I don't load the SageTV_HDHR manager, the recording is clean.
Has anybody else seen similar behavior? Any ideas for potential solutions? (and before anybody says "don't run HDHR mgr", I've got high GAF from the HD shows, so need to keep it working so I don't have to sleep on couch :-) )
__________________
Frankentivo: AeroCool M40-BK, ASUS P8H67-M PRO, i-5 2500 CPU, Patriot 4 GB DDR3 1333 Mhz, Silverstone ST45SF 450W 80 PLUS PSU, A-DATA 64GB SSD boot, WD 2TB local storage Tuners: 2 x HDHomerun OTA, 2 x HD-PVR w/VIP1200 UnRAID Pro: MD-1510/LC @ 8.5TB Extenders: 2 x HD-200 (1 802.11n), 1 x HD-100 Software: Windows 7 32bit, UnRAID 4.5.6 Pro, Macrium Reflect Sage: V7.1.5, Diamond, BMT, Web UI, PlayOn, TiSage |
|
#3
|
|||
|
|||
|
GAF is not quite as important as WAF as there isn't a a legally binding contract in place. Although in some places you have to be careful about CLWAF which can sneak up on you if not looking out for it.
|
|
#4
|
|||
|
|||
|
Quote:
Is it possible for you to post a screenshot or photo showing the problem? It's probably worth describing your system (hardware/software) including version levels where you can. That might help to narrow things down. Andy. |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|