SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

Reply
 
Thread Tools Search this Thread Display Modes
  #841  
Old 03-07-2012, 02:24 PM
Kirby's Avatar
Kirby Kirby is offline
Sage Icon
 
Join Date: Jan 2006
Posts: 1,253
I am on WHS2011 as well, and firewall is on, and I did not (to the best of my recollection) have to add any firewall exceptions for SageDCT or HDHR software to work.
__________________
Sage Server: HP ProLiant N40L MicroServer, AMD Turion II Neo N40L 1.5GHz Dual Core, 8GB Ram, WHS2011 64bit, Sage 7.1.9 WHS, HDHR (1 QAM, 1 OTA), HDHR Prime 3CC, HD-PVR for copy-once movie channels
HTPC Client:Intel DH61AG, Intel G620 cpu, 8GB ram, Intel 80GB SSD, 4GB RamDisk holding Sage/Java/TMT5
Sage Client:Sage HD-200 Extender
Reply With Quote
  #842  
Old 03-08-2012, 01:53 AM
Email68 Email68 is offline
Sage Advanced User
 
Join Date: Aug 2010
Location: N. Cal.
Posts: 108
Thanks for the info. I ended up rolling back to sageDCT 2.18 which I had running before my WHS v1 hard drive went south. With this version I can have the firewall on with the appropriate ports in udp open.

I know it should not make any difference, but during the testing with 2.2 DCT one of the tuners would constantly fail under the test tab. On 2.18 everything worked and responded as expected.

Time will tell. WAF is dropping fast though!! lol

Last edited by Email68; 03-08-2012 at 10:59 AM.
Reply With Quote
  #843  
Old 03-08-2012, 10:37 AM
doncote0's Avatar
doncote0 doncote0 is offline
Sage Aficionado
 
Join Date: Jun 2004
Location: Seattle, WA
Posts: 395
Talking Fixed Next Day and Working Better Now

After the HDHR and HDHR prime firmware upgrades, I started to get halts with the primes. The primes became a major source of annoyance since they were once rock solid and now would fail at almost every recording.

I had recently gotten rid of an HD-PVR from my system setup and figured it's configuration might be causing issues.

Once Silicondust came back (it went down during the initial firmware upgrade), I downloaded the latest beta firmwares from silicondust for the HDHR and HDHR3-CC.

Uninstalled the primes from the sources with Sage. Shutdown Sage normally including HDHR and SageDCT services. Applied beta firmwares to the HDHR and HDHR3-CC. Opened SageDCT and mirrored the settings found @ babgvant.com. Generated and overwrote the sageDCT tuner info (for copy and pasting into sage.properties). Opened sage.properties and pasted over the previous HDHR3 info. Removed all HD-PVR mmc information. Saved sage.properties file. Restarted sagetv including SageDCT and HDHR services. Setup HDHR3-CC video sources. Tested without issue. Strangely my system seems to be working better and faster now.

Last edited by doncote0; 03-08-2012 at 10:40 AM.
Reply With Quote
  #844  
Old 03-08-2012, 11:03 AM
jlmdxtv jlmdxtv is offline
Sage Advanced User
 
Join Date: Oct 2005
Location: PA
Posts: 182
Is it XP that's a problem here?

I'm starting to think Prime/SageDCT is more workable under Windows 7 and using XP may be a losing game for rock solid performance.

Has anyone here been using the Prime/SageDCT with 90% or better results in XP?

Thank you, john
Reply With Quote
  #845  
Old 03-09-2012, 07:23 AM
ChaOConnor's Avatar
ChaOConnor ChaOConnor is offline
Sage Aficionado
 
Join Date: Nov 2008
Location: Bel Air, MD
Posts: 350
Quote:
Originally Posted by Kirby View Post
I am on WHS2011 as well, and firewall is on, and I did not (to the best of my recollection) have to add any firewall exceptions for SageDCT or HDHR software to work.
Kirby,

I'm using an N40L w/ WHS 2011 and SageDCT to record from my HDHomeRun Prime. But I'm getting a ton of halts. I've read through the thread, and I have an intel NIC on the way to try it out, but did you do anything extra to make yours work? Thanks!
__________________
Server: AMD Phenom II X6 1090T 3.2GHz, ASRock 890FX Deluxe4 890FX, PNY Optima 8GB DDR3 1333
Media Storage: Rosewill RSV-S4-X 4 Bay Enclosure w/ 4 x 3TB via unRAID
Capture: HDHomerun Prime, HDHomerun x 2
Software: Sage Server 7.1.9 on Windows 7 (Virtualized in ESXi)
Clients: i3-2105, ASRock Z68 Pro3-M, 4GB DDR3 1600, 64GB SATA III (OS), 2TB WD Green (Recording), PNY GT 430 // 2 x HD-300
Reply With Quote
  #846  
Old 03-09-2012, 02:07 PM
freewheeling's Avatar
freewheeling freewheeling is offline
Sage Aficionado
 
Join Date: Nov 2009
Location: Virginia
Posts: 474
Quote:
Originally Posted by doncote0 View Post
AFAIK, it is absolutely critical that the Windows Firewall service the NIC is turned ON. The firewall being active actually allows the path for communication to occur. Just make sure the firewall profile does allows all communication (nothing blocked, not configured or disabled). I wish there was an exact firewall configuration for the HDHR Primes listed somewhere, but I have not found it.

Firewall off -- problems. On but allowing all communications -- working.
I don't understand what this means. How do you set the firewall up to allow all communication? Do you delete all the current rules and then set one rule that allows everything both ways?
Reply With Quote
  #847  
Old 03-09-2012, 03:48 PM
Kirby's Avatar
Kirby Kirby is offline
Sage Icon
 
Join Date: Jan 2006
Posts: 1,253
Quote:
Originally Posted by ChaOConnor View Post
Kirby,

I'm using an N40L w/ WHS 2011 and SageDCT to record from my HDHomeRun Prime. But I'm getting a ton of halts. I've read through the thread, and I have an intel NIC on the way to try it out, but did you do anything extra to make yours work? Thanks!
Nope, still using the built in ethernet port. Dont recall making any changes other than to make sure the 'get media info from internet' option was turned off. I've got HD Prime 3cc, and a HDHR, and HD-PVR which have all recorded at same time while viewing another recording. Havent had any network congestion on it. I am running 8GB of ram though.

Not sure if it matters, but I am using the WHS version of Sage on my N40L. Obviously it doesnt have the add-in support, but got the extra placeshifter license. Oh and Java 1.6.26.
__________________
Sage Server: HP ProLiant N40L MicroServer, AMD Turion II Neo N40L 1.5GHz Dual Core, 8GB Ram, WHS2011 64bit, Sage 7.1.9 WHS, HDHR (1 QAM, 1 OTA), HDHR Prime 3CC, HD-PVR for copy-once movie channels
HTPC Client:Intel DH61AG, Intel G620 cpu, 8GB ram, Intel 80GB SSD, 4GB RamDisk holding Sage/Java/TMT5
Sage Client:Sage HD-200 Extender
Reply With Quote
  #848  
Old 03-12-2012, 07:47 PM
phelme's Avatar
phelme phelme is offline
Sage Fanatic
 
Join Date: Dec 2006
Posts: 925
Had a "Recording Missed Due To Capture Device Failure" error last night. Oddly enough it mirrors an exact same failure from last week: same show, Talking Dead, same channel, AMCHD.

Nothing else was recording on that particular tuner prior to this one starting up. Haven't had any other failures in the past week and have probably recorded over a dozen shows on the Prime since the last failure. Another show was starting up at the same time on another tuner.

Posting this in case Andy can see anything in it.


Code:
2012/03/11 21:00:00.05 : After Accept: 7000
2012/03/11 21:00:00.05 : 7000 Bytes Received: 6
2012/03/11 21:00:00.05 : ProcessMessage 7000: NOOP
2012/03/11 21:00:00.05 : SageDCTTuner 7000 Send: OK
2012/03/11 21:00:00.05 : Before Accept: 7000
2012/03/11 21:00:00.05 : After Accept: 7002
2012/03/11 21:00:00.05 : 7002 Bytes Received: 6
2012/03/11 21:00:00.05 : ProcessMessage 7002: NOOP
2012/03/11 21:00:00.05 : SageDCTTuner 7002 Send: OK
2012/03/11 21:00:00.05 : Before Accept: 7002
2012/03/11 21:00:00.05 : After Accept: 7005
2012/03/11 21:00:00.05 : 7005 Bytes Received: 6
2012/03/11 21:00:00.05 : ProcessMessage 7005: NOOP
2012/03/11 21:00:00.05 : SageDCTTuner 7005 Send: OK
2012/03/11 21:00:00.05 : Before Accept: 7005
2012/03/11 21:00:00.05 : After Accept: 7000
2012/03/11 21:00:00.05 : 7000 Bytes Received: 6
2012/03/11 21:00:00.05 : ProcessMessage 7000: STOP
2012/03/11 21:00:00.05 : Stop active recording: 7000
2012/03/11 21:00:00.05 : UPnP stop: HDHomeRun Prime Tuner 131017F1-0
2012/03/11 21:00:00.05 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-0 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: Stop Refresh: False
2012/03/11 21:00:00.59 : Done ExecuteAction: Stop
2012/03/11 21:00:00.59 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-0 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:ConnectionManager Action: ConnectionComplete Refresh: False
2012/03/11 21:00:00.59 : Done ExecuteAction: ConnectionComplete
2012/03/11 21:00:00.59 : RTSP TEARDOWN - HDHomeRun Prime Tuner 131017F1-0
2012/03/11 21:00:00.59 : RTSP Send: TEARDOWN rtsp://10.0.1.175:554/tuner0/current RTSP/1.0
2012/03/11 21:00:00.61 : RTP Stop: False
2012/03/11 21:00:00.61 : Leave ProcessPackets
2012/03/11 21:00:00.61 : SageDCTTuner 7000 Send: OK
2012/03/11 21:00:00.61 : Before Accept: 7000
2012/03/11 21:00:01.02 : After Accept: 7000
2012/03/11 21:00:01.02 : 7000 Bytes Received: 176
2012/03/11 21:00:01.02 : ProcessMessage 7000: START SageDCT-HDHomeRun Prime Tuner 131017F1-0 Digital TV Tuner|703|2663049601966|\\SAGETV-SERVER\Recordings\TheCelebrityApprentice-S12E04-FailuretoLaunch-14729426-0.ts|Great
2012/03/11 21:00:01.02 : StartRecording - 7000: Request - Channel: 703 File: \\SAGETV-SERVER\Recordings\TheCelebrityApprentice-S12E04-FailuretoLaunch-14729426-0.ts
2012/03/11 21:00:01.02 : No active recordings in Stop - 7000
2012/03/11 21:00:01.02 : StartRecording 7000 - DKNTV
2012/03/11 21:00:01.02 : 7000 Channel: 703 FilePath: \\SAGETV-SERVER\Recordings\TheCelebrityApprentice-S12E04-FailuretoLaunch-14729426-0.ts
2012/03/11 21:00:01.02 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-0 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:ConnectionManager Action: PrepareForConnection Refresh: False
2012/03/11 21:00:01.02 : Done ExecuteAction: PrepareForConnection
2012/03/11 21:00:01.02 : ConnectionID: 292 AVInstanceID: 292
2012/03/11 21:00:01.02 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-0 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: Play Refresh: False
2012/03/11 21:00:01.05 : Done ExecuteAction: Play
2012/03/11 21:00:01.05 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-0 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:CAS Action: SetChannel Refresh: False
2012/03/11 21:00:01.69 : Done ExecuteAction: SetChannel
2012/03/11 21:00:01.69 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-0 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: GetMediaInfo Refresh: False
2012/03/11 21:00:01.74 : Done ExecuteAction: GetMediaInfo
2012/03/11 21:00:01.74 : RTSP Send: DESCRIBE rtsp://10.0.1.175:554/tuner0/current RTSP/1.0
2012/03/11 21:00:01.74 : DESCRIBE: RTSP/1.0 200 OK

2012/03/11 21:00:01.74 : RTSP Send: SETUP rtsp://10.0.1.175:554/tuner0/current RTSP/1.0
2012/03/11 21:00:01.74 : GetServiceVariable - Device: HDHomeRun Prime Tuner 131017F1-0 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: ProgramNumber Refresh: False
2012/03/11 21:00:01.84 : Done GetServiceVariable: ProgramNumber
2012/03/11 21:00:01.84 : GetServiceVariable - Device: HDHomeRun Prime Tuner 131017F1-0 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: PIDList Refresh: False
2012/03/11 21:00:02.05 : Done GetServiceVariable: PIDList
2012/03/11 21:00:02.05 : ProgramNumber: 1 PIDList: 0000,0031,0800,0801,0802
2012/03/11 21:00:02.05 : RTP Stop: True
2012/03/11 21:00:02.05 : RTP Start - Settings: RTP: 10.0.1.35:5010 RTCP:  File \\SAGETV-SERVER\Recordings\TheCelebrityApprentice-S12E04-FailuretoLaunch-14729426-0.ts - True
2012/03/11 21:00:02.05 : Start ProcessPackets
2012/03/11 21:00:02.05 : RTSP Send: PLAY rtsp://10.0.1.175:554/tuner0/current RTSP/1.0
2012/03/11 21:00:02.06 : PLAY: RTSP/1.0 200 OK

2012/03/11 21:00:02.14 : FS Write Async: False
2012/03/11 21:00:02.16 : SageDCTTuner 7000 Send: OK
2012/03/11 21:00:02.16 : Before Accept: 7000
2012/03/11 21:00:02.16 : After Accept: 7005
2012/03/11 21:00:02.16 : 7005 Bytes Received: 138
2012/03/11 21:00:02.16 : ProcessMessage 7005: START SageDCT-HDHomeRun Prime Tuner 131017F1-1 Digital TV Tuner|798|2663049604270|\\sagetv-server\sagetv\TalkingDead-14735900-0.ts|Great
2012/03/11 21:00:02.16 : StartRecording - 7005: Request - Channel: 798 File: \\sagetv-server\sagetv\TalkingDead-14735900-0.ts
2012/03/11 21:00:02.16 : No active recordings in Stop - 7005
2012/03/11 21:00:02.16 : StartRecording 7005 - AMC HD
2012/03/11 21:00:02.16 : 7005 Channel: 798 FilePath: \\sagetv-server\sagetv\TalkingDead-14735900-0.ts
2012/03/11 21:00:02.16 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:ConnectionManager Action: PrepareForConnection Refresh: False
2012/03/11 21:00:03.44 : Done ExecuteAction: PrepareForConnection
2012/03/11 21:00:03.44 : ConnectionID: 16668 AVInstanceID: 16668
2012/03/11 21:00:03.44 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: Play Refresh: False
2012/03/11 21:00:03.45 : Done ExecuteAction: Play
2012/03/11 21:00:03.45 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:CAS Action: SetChannel Refresh: False
2012/03/11 21:00:04.63 : Done ExecuteAction: SetChannel
2012/03/11 21:00:04.63 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: GetMediaInfo Refresh: False
2012/03/11 21:00:10.17 : After Accept: 7000
2012/03/11 21:00:10.17 : 7000 Bytes Received: 102
2012/03/11 21:00:10.17 : ProcessMessage 7000: GET_FILE_SIZE \\SAGETV-SERVER\Recordings\TheCelebrityApprentice-S12E04-FailuretoLaunch-14729426-0.ts
2012/03/11 21:00:10.17 : SageDCTTuner 7000 Send: 13299684
2012/03/11 21:00:10.17 : Before Accept: 7000
2012/03/11 21:00:10.17 : After Accept: 7000
2012/03/11 21:00:10.17 : 7000 Bytes Received: 102
2012/03/11 21:00:10.17 : ProcessMessage 7000: GET_FILE_SIZE \\SAGETV-SERVER\Recordings\TheCelebrityApprentice-S12E04-FailuretoLaunch-14729426-0.ts
2012/03/11 21:00:10.17 : SageDCTTuner 7000 Send: 13306264
2012/03/11 21:00:10.17 : Before Accept: 7000
2012/03/11 21:00:10.17 : After Accept: 7000
2012/03/11 21:00:10.17 : 7000 Bytes Received: 102
2012/03/11 21:00:10.17 : ProcessMessage 7000: GET_FILE_SIZE \\SAGETV-SERVER\Recordings\TheCelebrityApprentice-S12E04-FailuretoLaunch-14729426-0.ts
2012/03/11 21:00:10.17 : SageDCTTuner 7000 Send: 13308896
2012/03/11 21:00:10.17 : Before Accept: 7000
2012/03/11 21:00:11.47 : After Accept: 7000
2012/03/11 21:00:11.47 : 7000 Bytes Received: 102
2012/03/11 21:00:11.47 : ProcessMessage 7000: GET_FILE_SIZE \\SAGETV-SERVER\Recordings\TheCelebrityApprentice-S12E04-FailuretoLaunch-14729426-0.ts
2012/03/11 21:00:11.47 : SageDCTTuner 7000 Send: 15442132
2012/03/11 21:00:11.47 : Before Accept: 7000
2012/03/11 21:00:34.24 : After Accept: 7002
2012/03/11 21:00:34.24 : 7002 Bytes Received: 6
2012/03/11 21:00:34.24 : ProcessMessage 7002: NOOP
2012/03/11 21:00:34.24 : SageDCTTuner 7002 Send: OK
2012/03/11 21:00:34.24 : Before Accept: 7002
2012/03/11 21:00:34.24 : After Accept: 7000
2012/03/11 21:00:34.24 : 7000 Bytes Received: 6
2012/03/11 21:00:34.24 : ProcessMessage 7000: NOOP
2012/03/11 21:00:34.24 : SageDCTTuner 7000 Send: OK
2012/03/11 21:00:34.24 : Before Accept: 7000
2012/03/11 21:00:41.22 : After Accept: 7000
2012/03/11 21:00:41.22 : 7000 Bytes Received: 102
2012/03/11 21:00:41.22 : ProcessMessage 7000: GET_FILE_SIZE \\SAGETV-SERVER\Recordings\TheCelebrityApprentice-S12E04-FailuretoLaunch-14729426-0.ts
2012/03/11 21:00:41.22 : SageDCTTuner 7000 Send: 66158140
2012/03/11 21:00:41.22 : Before Accept: 7000
2012/03/11 21:00:58.65 : After Accept: 7000
2012/03/11 21:00:58.65 : 7000 Bytes Received: 6
2012/03/11 21:00:58.65 : ProcessMessage 7000: NOOP
2012/03/11 21:00:58.65 : SageDCTTuner 7000 Send: OK
2012/03/11 21:00:58.66 : Before Accept: 7000
2012/03/11 21:00:58.66 : After Accept: 7002
2012/03/11 21:00:58.66 : 7002 Bytes Received: 6
2012/03/11 21:00:58.66 : ProcessMessage 7002: NOOP
2012/03/11 21:00:58.66 : SageDCTTuner 7002 Send: OK
2012/03/11 21:00:58.66 : Before Accept: 7002
2012/03/11 21:01:05.26 : After Accept: 7000
2012/03/11 21:01:05.26 : 7000 Bytes Received: 102
2012/03/11 21:01:05.26 : ProcessMessage 7000: GET_FILE_SIZE \\SAGETV-SERVER\Recordings\TheCelebrityApprentice-S12E04-FailuretoLaunch-14729426-0.ts
2012/03/11 21:01:05.26 : SageDCTTuner 7000 Send: 109630884
2012/03/11 21:01:05.26 : Before Accept: 7000
2012/03/11 21:01:06.68 : After Accept: 7000
2012/03/11 21:01:06.68 : 7000 Bytes Received: 102
2012/03/11 21:01:06.68 : ProcessMessage 7000: GET_FILE_SIZE \\SAGETV-SERVER\Recordings\TheCelebrityApprentice-S12E04-FailuretoLaunch-14729426-0.ts
2012/03/11 21:01:06.68 : SageDCTTuner 7000 Send: 112809024
2012/03/11 21:01:06.68 : Before Accept: 7000
2012/03/11 21:01:25.09 : After Accept: 7002
2012/03/11 21:01:25.09 : 7002 Bytes Received: 6
2012/03/11 21:01:25.09 : ProcessMessage 7002: NOOP
2012/03/11 21:01:25.09 : SageDCTTuner 7002 Send: OK
2012/03/11 21:01:25.09 : Before Accept: 7002
2012/03/11 21:01:25.09 : After Accept: 7000
2012/03/11 21:01:25.09 : 7000 Bytes Received: 6
2012/03/11 21:01:25.09 : ProcessMessage 7000: NOOP
2012/03/11 21:01:25.09 : SageDCTTuner 7000 Send: OK
2012/03/11 21:01:25.09 : Before Accept: 7000
2012/03/11 21:01:29.68 : After Accept: 7000
2012/03/11 21:01:29.68 : 7000 Bytes Received: 102
2012/03/11 21:01:29.68 : ProcessMessage 7000: GET_FILE_SIZE \\SAGETV-SERVER\Recordings\TheCelebrityApprentice-S12E04-FailuretoLaunch-14729426-0.ts
2012/03/11 21:01:29.68 : SageDCTTuner 7000 Send: 150411092
2012/03/11 21:01:29.68 : Before Accept: 7000
2012/03/11 21:01:33.79 : After Accept: 7000
2012/03/11 21:01:33.79 : 7000 Bytes Received: 6
2012/03/11 21:01:33.79 : ProcessMessage 7000: NOOP
2012/03/11 21:01:33.79 : SageDCTTuner 7000 Send: OK
2012/03/11 21:01:33.79 : Before Accept: 7000
2012/03/11 21:01:33.79 : After Accept: 7002
2012/03/11 21:01:33.79 : 7002 Bytes Received: 6
2012/03/11 21:01:33.79 : ProcessMessage 7002: NOOP
2012/03/11 21:01:33.79 : SageDCTTuner 7002 Send: OK
2012/03/11 21:01:33.79 : Before Accept: 7002
2012/03/11 21:01:33.81 : After Accept: 7000
2012/03/11 21:01:33.81 : 7000 Bytes Received: 102
2012/03/11 21:01:33.81 : ProcessMessage 7000: GET_FILE_SIZE \\SAGETV-SERVER\Recordings\TheCelebrityApprentice-S12E04-FailuretoLaunch-14729426-0.ts
2012/03/11 21:01:33.81 : SageDCTTuner 7000 Send: 157404316
2012/03/11 21:01:33.81 : Before Accept: 7000
2012/03/11 21:01:44.68 : After Accept: 7000
2012/03/11 21:01:44.68 : 7000 Bytes Received: 102
2012/03/11 21:01:44.68 : ProcessMessage 7000: GET_FILE_SIZE \\SAGETV-SERVER\Recordings\TheCelebrityApprentice-S12E04-FailuretoLaunch-14729426-0.ts
2012/03/11 21:01:44.68 : SageDCTTuner 7000 Send: 176652132
2012/03/11 21:01:44.68 : Before Accept: 7000
2012/03/11 21:01:59.36 : Done ExecuteAction: GetMediaInfo
2012/03/11 21:01:59.36 : RTSP Send: DESCRIBE rtsp://10.0.1.175:554/tuner1/current RTSP/1.0
2012/03/11 21:01:59.36 : DESCRIBE: RTSP/1.0 200 OK

2012/03/11 21:01:59.36 : RTSP Send: SETUP rtsp://10.0.1.175:554/tuner1/current RTSP/1.0
2012/03/11 21:01:59.36 : GetServiceVariable - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: ProgramNumber Refresh: False
2012/03/11 21:01:59.69 : After Accept: 7000
2012/03/11 21:01:59.69 : 7000 Bytes Received: 102
2012/03/11 21:01:59.69 : ProcessMessage 7000: GET_FILE_SIZE \\SAGETV-SERVER\Recordings\TheCelebrityApprentice-S12E04-FailuretoLaunch-14729426-0.ts
2012/03/11 21:01:59.69 : SageDCTTuner 7000 Send: 203777524
2012/03/11 21:01:59.69 : Before Accept: 7000
2012/03/11 21:01:59.76 : Done GetServiceVariable: ProgramNumber
2012/03/11 21:01:59.76 : GetServiceVariable - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: PIDList Refresh: False
2012/03/11 21:02:00.15 : Done GetServiceVariable: PIDList
2012/03/11 21:02:00.15 : ProgramNumber: 2 PIDList: 0000,0030,07C0,07C1,07C2,07C3,07C4,07C5,07C6
2012/03/11 21:02:00.15 : RTP Stop: True
2012/03/11 21:02:00.15 : RTP Start - Settings: RTP: 10.0.1.35:5014 RTCP:  File \\sagetv-server\sagetv\TalkingDead-14735900-0.ts - True
2012/03/11 21:02:00.15 : RTSP Send: PLAY rtsp://10.0.1.175:554/tuner1/current RTSP/1.0
2012/03/11 21:02:00.15 : Start ProcessPackets
2012/03/11 21:02:00.15 : PLAY: RTSP/1.0 200 OK

2012/03/11 21:02:00.17 : FS Write Async: False
2012/03/11 21:02:02.17 : UPnP stop: HDHomeRun Prime Tuner 131017F1-1
2012/03/11 21:02:02.17 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: Stop Refresh: False
2012/03/11 21:02:02.44 : Done ExecuteAction: Stop
2012/03/11 21:02:02.44 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:ConnectionManager Action: ConnectionComplete Refresh: False
2012/03/11 21:02:02.95 : Done ExecuteAction: ConnectionComplete
2012/03/11 21:02:02.95 : RTSP TEARDOWN - HDHomeRun Prime Tuner 131017F1-1
2012/03/11 21:02:02.95 : RTSP Send: TEARDOWN rtsp://10.0.1.175:554/tuner1/current RTSP/1.0
2012/03/11 21:02:02.95 : RTP Stop: False
2012/03/11 21:02:02.95 : Leave ProcessPackets
2012/03/11 21:02:02.95 : Recording did not start.  Try again. HDHomeRun Prime Tuner 131017F1-1
2012/03/11 21:02:02.95 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:ConnectionManager Action: PrepareForConnection Refresh: False
2012/03/11 21:02:04.22 : Done ExecuteAction: PrepareForConnection
2012/03/11 21:02:04.22 : ConnectionID: 16668 AVInstanceID: 16668
2012/03/11 21:02:04.22 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: Play Refresh: False
2012/03/11 21:02:04.48 : Done ExecuteAction: Play
2012/03/11 21:02:04.48 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:CAS Action: SetChannel Refresh: False
2012/03/11 21:02:05.00 : Done ExecuteAction: SetChannel
2012/03/11 21:02:05.00 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: GetMediaInfo Refresh: False
2012/03/11 21:02:05.26 : Done ExecuteAction: GetMediaInfo
2012/03/11 21:02:05.26 : RTSP Send: DESCRIBE rtsp://10.0.1.175:554/tuner1/current RTSP/1.0
2012/03/11 21:02:05.26 : DESCRIBE: RTSP/1.0 200 OK

2012/03/11 21:02:05.26 : RTSP Send: SETUP rtsp://10.0.1.175:554/tuner1/current RTSP/1.0
2012/03/11 21:02:05.26 : GetServiceVariable - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: ProgramNumber Refresh: False
2012/03/11 21:02:06.39 : Done GetServiceVariable: ProgramNumber
2012/03/11 21:02:06.39 : GetServiceVariable - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: PIDList Refresh: False
2012/03/11 21:02:06.81 : Done GetServiceVariable: PIDList
2012/03/11 21:02:06.81 : ProgramNumber: 2 PIDList: 0000,0030,07C0,07C1,07C2,07C3,07C4,07C5,07C6
2012/03/11 21:02:06.81 : RTP Stop: True
2012/03/11 21:02:06.81 : RTP Start - Settings: RTP: 10.0.1.35:5014 RTCP:  File \\sagetv-server\sagetv\TalkingDead-14735900-0.ts - True
2012/03/11 21:02:06.81 : Start ProcessPackets
2012/03/11 21:02:06.81 : RTSP Send: PLAY rtsp://10.0.1.175:554/tuner1/current RTSP/1.0
2012/03/11 21:02:06.81 : PLAY: RTSP/1.0 200 OK

2012/03/11 21:02:06.81 : FS Write Async: False
2012/03/11 21:02:06.91 : SageDCTTuner 7005 Send: OK
2012/03/11 21:02:06.91 : Before Accept: 7005
2012/03/11 21:02:06.91 : After Accept: 7005
2012/03/11 21:02:06.91 : 7005 Bytes Received: 64
2012/03/11 21:02:06.91 : ProcessMessage 7005: GET_FILE_SIZE \\sagetv-server\sagetv\TalkingDead-14735900-0.ts
2012/03/11 21:02:06.91 : SageDCTTuner 7005 Send: 184428
2012/03/11 21:02:06.91 : Before Accept: 7005
2012/03/11 21:02:06.91 : After Accept: 7005
2012/03/11 21:02:06.91 : 7005 Bytes Received: 64
2012/03/11 21:02:06.91 : ProcessMessage 7005: GET_FILE_SIZE \\sagetv-server\sagetv\TalkingDead-14735900-0.ts
2012/03/11 21:02:06.91 : SageDCTTuner 7005 Send: 187060
2012/03/11 21:02:06.91 : Before Accept: 7005
2012/03/11 21:02:06.91 : After Accept: 7005
2012/03/11 21:02:06.91 : 7005 Bytes Received: 6
2012/03/11 21:02:06.91 : ProcessMessage 7005: NOOP
2012/03/11 21:02:06.91 : SageDCTTuner 7005 Send: OK
2012/03/11 21:02:06.91 : Before Accept: 7005
2012/03/11 21:02:06.91 : After Accept: 7005
2012/03/11 21:02:06.91 : 7005 Bytes Received: 64
2012/03/11 21:02:06.91 : ProcessMessage 7005: GET_FILE_SIZE \\sagetv-server\sagetv\TalkingDead-14735900-0.ts
2012/03/11 21:02:06.91 : SageDCTTuner 7005 Send: 188376
2012/03/11 21:02:06.91 : Before Accept: 7005
2012/03/11 21:02:06.91 : After Accept: 7005
2012/03/11 21:02:06.91 : 7005 Bytes Received: 64
2012/03/11 21:02:06.91 : ProcessMessage 7005: GET_FILE_SIZE \\sagetv-server\sagetv\TalkingDead-14735900-0.ts
2012/03/11 21:02:06.91 : GetSize has not changed: 188376 - 3/11/2012 9:02:06 PM
2012/03/11 21:02:06.91 : SageDCTTuner 7005 Send: 188376
2012/03/11 21:02:06.91 : Before Accept: 7005
2012/03/11 21:02:06.91 : After Accept: 7005
2012/03/11 21:02:06.91 : 7005 Bytes Received: 64
2012/03/11 21:02:06.91 : ProcessMessage 7005: GET_FILE_SIZE \\sagetv-server\sagetv\TalkingDead-14735900-0.ts
2012/03/11 21:02:06.91 : GetSize has not changed: 188376 - 3/11/2012 9:02:06 PM
2012/03/11 21:02:06.91 : SageDCTTuner 7005 Send: 188376
2012/03/11 21:02:06.91 : Before Accept: 7005
2012/03/11 21:02:06.91 : After Accept: 7005
2012/03/11 21:02:06.91 : 7005 Bytes Received: 6
2012/03/11 21:02:06.91 : ProcessMessage 7005: STOP
2012/03/11 21:02:06.91 : Stop active recording: 7005
2012/03/11 21:02:06.91 : UPnP stop: HDHomeRun Prime Tuner 131017F1-1
2012/03/11 21:02:06.91 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: Stop Refresh: False
2012/03/11 21:02:07.69 : Done ExecuteAction: Stop
2012/03/11 21:02:07.69 : ExecuteAction - Device: HDHomeRun Prime Tuner 131017F1-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:ConnectionManager Action: ConnectionComplete Refresh: False
2012/03/11 21:02:08.95 : Done ExecuteAction: ConnectionComplete
2012/03/11 21:02:08.95 : RTSP TEARDOWN - HDHomeRun Prime Tuner 131017F1-1
2012/03/11 21:02:08.95 : RTSP Send: TEARDOWN rtsp://10.0.1.175:554/tuner1/current RTSP/1.0
2012/03/11 21:02:08.95 : RTP Stop: False
2012/03/11 21:02:08.95 : Leave ProcessPackets
2012/03/11 21:02:08.95 : SageDCTTuner 7005 Send: OK
2012/03/11 21:02:08.95 : Before Accept: 7005
2012/03/11 21:02:08.95 : After Accept: 7005
2012/03/11 21:02:08.95 : 7005 Bytes Received: 64
2012/03/11 21:02:08.95 : ProcessMessage 7005: GET_FILE_SIZE \\sagetv-server\sagetv\TalkingDead-14735900-0.ts
2012/03/11 21:02:08.95 : SageDCTTuner 7005 Send: 0
2012/03/11 21:02:08.95 : Before Accept: 7005
2012/03/11 21:02:08.95 : After Accept: 7005
2012/03/11 21:02:08.95 : 7005 Bytes Received: 6
2012/03/11 21:02:08.95 : ProcessMessage 7005: NOOP
2012/03/11 21:02:08.95 : SageDCTTuner 7005 Send: OK
2012/03/11 21:02:08.95 : Before Accept: 7005
2012/03/11 21:02:14.69 : After Accept: 7000
2012/03/11 21:02:14.69 : 7000 Bytes Received: 102
Reply With Quote
  #849  
Old 03-12-2012, 08:09 PM
Telecore Telecore is offline
Sage User
 
Join Date: Oct 2010
Location: Texas
Posts: 59
Lots of halts

I too have been getting lots of halts and I've isolated it to the hdhr prime. Check the log file on your prime for either watchdog reset or resource errors. When errors happen hdhr device web page becomes inacessible and hdhrs disappear from win7 network window. Also, silicon dust quicktv app will program freeze if watching on pc. Problems are happening at least 1x per hour for me. Duration can be 2-3 min. or sometimes have to change channel. Running latest beta software 20120224 on two primes and also have two atsc hdhrs with no problems.

Last edited by Telecore; 03-12-2012 at 08:14 PM.
Reply With Quote
  #850  
Old 03-15-2012, 02:36 PM
freewheeling's Avatar
freewheeling freewheeling is offline
Sage Aficionado
 
Join Date: Nov 2009
Location: Virginia
Posts: 474
SageDCT halts.

I was getting halts doing the recording of Fox & Friends on FNC, about two hours in. Since these were always happening on tuner 1 I decided to uninstall that tuner and try that recording using WMC. The recording gets flaky in about the same place as SageDCT, but I don't actually get any "halts." It just keeps recording and the quality eventually comes back, or I just don't know how to determine halts in WMC. Anyway, I figure I'll try one of the other tuners and see if that's any different. Now the default on SageDCT will be either 0 or 2 since 1 isn't available.

I've also ordered an Intel NIC just in case that's the problem. But it looks like the tuner has problems after it reaches a certain temp, and then comes back when the temp gets higher. Weird.
Reply With Quote
  #851  
Old 03-15-2012, 03:42 PM
jlmdxtv jlmdxtv is offline
Sage Advanced User
 
Join Date: Oct 2005
Location: PA
Posts: 182
Quote:
Originally Posted by freewheeling View Post
... But it looks like the tuner has problems after it reaches a certain temp, and then comes back when the temp gets higher. Weird.
freewheeling:

Interesting observation. Did you mean to say it comes back when the temp gets *lower*?

If so, I'm going to try a cooling fan on the Prime because mine tends to fail when multiple recordings are taking place. I don't mind blowing the warranty. I've tried most everything else (including the Intel NIC) outside of upgrading from XP to Windows 7.

john
Reply With Quote
  #852  
Old 03-15-2012, 05:16 PM
freewheeling's Avatar
freewheeling freewheeling is offline
Sage Aficionado
 
Join Date: Nov 2009
Location: Virginia
Posts: 474
Quote:
Originally Posted by jlmdxtv View Post
freewheeling:

Interesting observation. Did you mean to say it comes back when the temp gets *lower*?

If so, I'm going to try a cooling fan on the Prime because mine tends to fail when multiple recordings are taking place. I don't mind blowing the warranty. I've tried most everything else (including the Intel NIC) outside of upgrading from XP to Windows 7.

john
Well, since it goes away and then comes back periodically it might be heating up and cooling down. But it could be anything in the system, not just the tuner. I don't think a fan would void the warranty. It might also be a combination of things, including a weak signal. That particular channel does come in a little weak, but why would it always fail at the same time in the program? Maybe there's a surge of other activity around 7:30 to 8:00 AM and that has something to do with it? I'm going to try a few other things too.
Reply With Quote
  #853  
Old 03-16-2012, 12:21 AM
phelme's Avatar
phelme phelme is offline
Sage Fanatic
 
Join Date: Dec 2006
Posts: 925
Noticed one oops today. One of my Prime tuner ports had an XP firewall setting of TCP rather than UDP for the exception. No wonder I was getting device failures on that tuner.

Last edited by phelme; 03-16-2012 at 12:41 AM.
Reply With Quote
  #854  
Old 03-16-2012, 08:51 AM
jlmdxtv jlmdxtv is offline
Sage Advanced User
 
Join Date: Oct 2005
Location: PA
Posts: 182
I didn't realize the Prime was filled with vent holes, unlike the HDHR. I put a full size fan on it last night and ran a multi-tuner test recoding 4 half-hour back to back programs on all of its tuners.

It failed as typical under a full load with gaps in 4 or 5 recordings. Over heating doesn't appear to be an issue with my setup.

john
Reply With Quote
  #855  
Old 03-17-2012, 09:25 PM
freewheeling's Avatar
freewheeling freewheeling is offline
Sage Aficionado
 
Join Date: Nov 2009
Location: Virginia
Posts: 474
Does anyone know if you can assign a certain favorite to an individual tuner, or exclude one tuner, in SageDCT or SageTV? I can probably trick it into not using the default tuner by assigning a 5 minute recording that overlaps the start of the program. Since Tuner 1 is the default (or seems to be) it'll have to use 0 or 2, but it's sort of inelegant. I suspect that tuner 1 is the one that has a problem on shows longer than 90 minutes.

I also got an Intel CT PCIexpress ethernet adapter so perhaps that'll help.
Reply With Quote
  #856  
Old 03-20-2012, 03:11 PM
jlmdxtv jlmdxtv is offline
Sage Advanced User
 
Join Date: Oct 2005
Location: PA
Posts: 182
After weeks of tuning/experimenting with the HdHomeRun Prime under XP (SP3, 32bit), I've never been able to record over 10 shows without at least one "incident". (Halt/Gap/total tuner failure). These issues generally occurred on back-to-back recordings or during multiple recordings at once.

Over the weekend I downloaded Windows 8 preview 64-bit, SageDCT 64-bit, SageTV (using my old Wiz.bin), installed the Prime, plus a standard HDHomerun and have recorded dozens of shows without a single hiccup on the same setup. I'm running a first generation I3 with 4GB ram. In fact, it's worked so well, I've turned off the Commercial Detector's "play nice" parameter (which was necessary for me under XP), and allow for 2 detection jobs at once without issue -- even during subsequent recordings.

Needless to say, I won't be using XP again for my SageTV server.

Thanks for all the suggestions and comments.

john
Reply With Quote
  #857  
Old 03-21-2012, 11:42 AM
doncote0's Avatar
doncote0 doncote0 is offline
Sage Aficionado
 
Join Date: Jun 2004
Location: Seattle, WA
Posts: 395
Red face Windows 7/8 Firewall For SageDCT

Quote:
Originally Posted by freewheeling View Post
I don't understand what this means. How do you set the firewall up to allow all communication? Do you delete all the current rules and then set one rule that allows everything both ways?
You could, but Windows 7 would just recreate the rules except for the ones that it is does not control (not directly protected or created by Windows 7).

I do not recommend that. Check the rules of the active profile.

Less secure, but effective:
For inbound and outbound connections, make sure all connections are green (allowed). If you see any gray ones, those are currently blocked. Change them to green.

If you want to do a more controlled "hunt" for the correct firewall connection(s), that is up to you but it is a more secure way to go.

If you can do a send test in SageDCT, you are probably okay. If you get a message that something is blocked, then either the SageDCT service is down or the firewall is blocking the communication.

I wish someone had the exact port list for everything Sage and SageDCT use, but I have not seen it posted. That would be an awesome sticky.
Reply With Quote
  #858  
Old 03-24-2012, 10:22 AM
zoop's Avatar
zoop zoop is offline
Sage Advanced User
 
Join Date: Jan 2006
Location: Elkridge, MD
Posts: 164
Quote:
Originally Posted by jlmdxtv View Post
After weeks of tuning/experimenting with the HdHomeRun Prime under XP (SP3, 32bit), I've never been able to record over 10 shows without at least one "incident". (Halt/Gap/total tuner failure). These issues generally occurred on back-to-back recordings or during multiple recordings at once.

Over the weekend I downloaded Windows 8 preview 64-bit, SageDCT 64-bit, SageTV (using my old Wiz.bin), installed the Prime, plus a standard HDHomerun and have recorded dozens of shows without a single hiccup on the same setup. I'm running a first generation I3 with 4GB ram. In fact, it's worked so well, I've turned off the Commercial Detector's "play nice" parameter (which was necessary for me under XP), and allow for 2 detection jobs at once without issue -- even during subsequent recordings.

Needless to say, I won't be using XP again for my SageTV server.

Thanks for all the suggestions and comments.

john
Agreed. Flakey in xp, solid is win8 here.
__________________
_-_-_
i7-2600 w/ SageTV Server Linux OEM V7.1.9 - Ubuntu 12.04LTS x64
-- 2x HDHomeRun Prime
-- 1x HDHR-DT
-- 8TB RAID5
3x SageTV HD-300 Media Extenders
Reply With Quote
  #859  
Old 03-28-2012, 12:14 PM
scadilla scadilla is offline
New Member
 
Join Date: Apr 2004
Posts: 4
I had a couple of quick questions. I am using SageDCT with HDHR Prime (3 tuner), I have noticed that when I capture SD content that flesh tones have this bluish tint to them. I haven't had any issues like this when capturing HD content. I am running 2.1.8 32 bit on Windows 7 x64. So first question here, has anyone seen anything similar? Second question if I want to update my version of SageDCT, what is involved? Any suggestions / advice would be welcomed. Thanks in advance.
Reply With Quote
  #860  
Old 03-28-2012, 03:31 PM
jlmdxtv jlmdxtv is offline
Sage Advanced User
 
Join Date: Oct 2005
Location: PA
Posts: 182
I've never seen a "bluish tint" on any recordings coming from Prime - even on SD recordings.

I've updated my SageDCT to a newer version, but I think I did that on an older version of the properties file that didn't have the SageDCT encoders listed in it from the earlier version of SageDCT.

You could save the properties file as a backup, load the new SageDCT, go through its install and see if the new data for the Properties file looks like what's already in there. If not, delete out all the old information related to SageDCT and insert the new.

BTW: Make sure the SageDCT service is stopped before installing the new version of SageDCT.

john
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
HDHomeRun PRIME CableCARD does work with premium channels Homebuilder Hardware Support 1 05-17-2011 09:08 AM
HDHR Prime Available For Pre-Order on Amazon, $207.20 USD (or not) mayamaniac General Discussion 20 05-14-2011 05:15 PM
Let's add support for the new silcon dust HDHR Prime (copy freely channels) Gustovier Hardware Support 30 05-05-2011 09:32 AM
HDHomerun Prime? cenwesi Hardware Support 26 04-19-2011 06:40 PM
HDHomeRun Prime with CableCARD might work with MythTV after all KJake The SageTV Community 4 07-22-2010 10:10 AM


All times are GMT -6. The time now is 03:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.