HVR-2200 (2250)

[starflight]

Anyone using one of these MBs? They are nVidia 9000 series GPU MB. Intel based.

GIGABYTE GA-E7AUM-DS2H
ASUS P5N7A-VM
ZOTAC GF9300-A-E

I'm leaning toward the Gigabyte MB. The nVidia 9000 series GPUs have the Purevideo HD support for HD-OTA and BD DVDs.

[SHS]

MattHelm what motherboard do you have?.

[SHS]

starflight you would be better off with something like this which has 2 1x PCIe slot
Intel BOXDG35EC
Intel BOXDQ45CB
Intel BOXDG45ID
I'm not fan of anything made by ASUS nor ECS any way
ECS G43T-M
ASUS P5Q-VM, ASUS P5E-VM, ASUS P5Q-EM

[MattHelm]

Originally Posted by SHS

MattHelm what motherboard do you have?.

It's in my sig., but both that have 2250's and Intel Pro NICs are GA-MA69VM-S2, which are AMD 690 chip set based. It really shouldn't matter, as the whole idea behind PCI-e was to make the interface the same. Any 1x device should work in ANY 16x slot. Could if maybe be a 2.0 vs 1.0 issue? I've heard of at least a few of those. (Though that's not SUPPOSE to happen either!)

[SHS]

MattHelm have you try 2 2250 in one system?.

Could if maybe be a 2.0 vs 1.0 issue

That possable mine is ver 1.0
Belive me it didn't matter if I had 1800 or 2250 the system wouldn't boot at all in 16x slot.
AMD must did something rigth where intel chip are mess up.

[MattHelm]

Originally Posted by SHS

MattHelm have you try 2 2250 in one system?.

That possable mine is ver 1.0
Belive me it didn't matter if I had 1800 or 2250 the system wouldn't boot at all in 16x slot.
AMD must did something rigth where intel chip are mess up.

Sorry, no. The only reason I have 2 2250s, is the two servers are 250+ miles apart. One is my "dad's" server and one is mine, but I run and configure both. But, saying that, I'm only 95% sure the Intel NIC is in the 16x slot. I might have it backwards and the 2250 is in the 16x, and the NIC is in the 1x. I'll try really hard to remember and check mine tonight. I do know both systems are the same, except dad's also has 2 1600s in his. (he watches a TON of TV)

[heffe2001]

My system's got 2 2250's in it now, and they appear to work fine on WHS. I was planning on adding a 3rd, but I think I'm just going to grab 2 HD PVR's and stick on that machine soon as I save my pennies .

[MattHelm]

Originally Posted by MattHelm

Sorry, no. The only reason I have 2 2250s, is the two servers are 250+ miles apart. One is my "dad's" server and one is mine, but I run and configure both. But, saying that, I'm only 95% sure the Intel NIC is in the 16x slot. I might have it backwards and the 2250 is in the 16x, and the NIC is in the 1x. I'll try really hard to remember and check mine tonight. I do know both systems are the same, except dad's also has 2 1600s in his. (he watches a TON of TV)

OK, just checked, and I was wrong. The 2250 is in the 16x slot and working fine, and the Intel Pro NIC card is in the 4x slot. (only 2 slots, and that's the sizes)

BTW, on the AMD 690V both the 16x and 4x slots are hooked to the "North Bridge".

[starflight]

Solved the issue with the 2250 in an x16 slot; An old install of WinXP.

I had built a new PC, but used the HD from the old PC by selecting WinXP install to repair instead of a fresh install. I had deleted the previous video driver (AGP slot). I'm not sure what was causing the problem.

Since I now have a SageTV HD-200, I had decommissioned a Tivo box that I had upgraded with a 500 GB HD. I did a fresh install on the 500GB HD and install the 2250 in the x16 slot. The 2250 is working perfectly in the x16 slot.

Go figure.

[antplugger]

Does anyone have "seeker/fast_mux_switch" set to TRUE for the 22xx Cards ?
I still have mine to false and I get a nasty delay and visual program interruption when I am viewing the same channel and the program material changes (usually on the hour or half hour). Wondering if they are related.

With WAF at an all time low due to going to dual 2200's, x64 and HD Extender at the same time I am being cautious on making any changes.

Thanks

[paulbeers]

Originally Posted by antplugger

Does anyone have "seeker/fast_mux_switch" set to TRUE for the 22xx Cards ?
I still have mine to false and I get a nasty delay and visual program interruption when I am viewing the same channel and the program material changes (usually on the hour or half hour). Wondering if they are related.

With WAF at an all time low due to going to dual 2200's, x64 and HD Extender at the same time I am being cautious on making any changes.

Thanks

Is it only on analog material? A couple of us have noticed that recording one analog and one digital is fine, two digital is also fine, but two analog (SD) and it is sunk....it causes all kinds of stuttering.

[mlebl1h]

Thanks to all the great discussion in this thread, I bought an HVR-2250 2 weeks ago, and put it in my HTPC, which is running SageTV 6.5.9. I struggled with several hard crash issues, but finally got everything stable after a BIOS update, nForce 430 chipset driver updates, and using the then-latest jan-26-09 beta drivers. I was finally able to tune analog and digital channels without any crashes, and I moved on to the task of channel mapping to the Comcast Sunnyvale lineup.

The mapping was pretty challenging, but in AVSforum postings, I found instructions on how to use the Pace DTA adapters that Comcast is giving out for 'free' to analog extended basic customer like me, to get the real Comcast to QAM channel map from the Pace DTA diagnostics screen. I wrote down the frequency and sub-channel (program number) reported by the DTA box for every clear QAM channel it could see, and entered these into SageTV:

Comcast name freq prog QAM QAM-sub
2 KTVU 519 1 73 73-1
4 KRON 519 2 73 73-2
5 KPIX 519 3 73 73-3
7 KGO 519 4 73 73-4
9 KQED 519 5 73 73-5
..........................................
56 CNN 765 7 119 119-7
82 GOLF 765 8 119 119-8
31 HSN 765 9 119 119-9
34 QVC 765 10 119 119-10
57 HN 765 12 119 119-12
197 KICUT-D 783 3 122 122-3
99 LOCAL 807 4 126 126-4
70 BET 819 1 128 128-1
74 OXGN 819 2 128 128-2
165 OXGN 819 2 128 128-2
29 DSC 819 3 128 128-3
50 TLC-W 819 4 128 128-4
63 COM-W 819 5 128 128-5
44 VH1-W 819 6 128 128-6
54 TOON 819 7 128 128-7
45 SPIKE 819 8 128 128-8
64 E! 819 9 128 128-9
43 MTV-W 819 10 128 128-10
53 NICK 819 11 128 128-11

There are 104 clear QAM channels, but when I got near the end of the list (sorted by QAM channel), I found that SageTV hadn't found any of the QAM channels above 122. All of the QAM 128 channels were missing!

After more experiments, and 2 calls to Hauppauge tech support, which didn't turn out to be helpful, I just found that the Hauppauge beta drivers link has a new HVR-2250 driver, with a date of feb-25-09. In the release notes, it explains the reason I wasn't getting the QAM 128 channels:

ftp://ftp.hauppauge.com/Support/HVR2250/
File: 090225_22xx_7.6.1.27056.prerelease.zip

/*
** Hauppauge Release Info/History...
*/
Driver Release 7.6.1.27056.PreRelease (2/25/09)
* Fix both Analog and Digital "First Tune" Issues.
* Fix bad interaction between [digital] tuners. Sometimes digital tuner would receive errors on tune from other.
* Initial Support for Crossbar Flexibility.
* Extend Digital Cable (QAM) tuning range up to channel 158 (max had been 125).
* Fix "Analog Blue Video on Digital Tune" issue. Sometimes analog video would go blue if the other tuner were tuned digitally.
* Fix MCE "FirstRun" detection of ATSC.

If you've been having trouble getting QAM channels above 125, it's worth giving these new drivers a try. I'll try them as soon as I get home.

[antplugger]

How are you finding the latest drivers, are they reliable ?

Ta

[mlebl1h]

The new drivers seem mostly like the older Jan-26 drivers, but I see changes in the signal strength bar in SageTV. It used to always just show "100%", but now it varies, and shows me 6% when I try to tune QAM channel 128 by manually assigning something like 54 Toon to "128-7". I don't really believe that it's a signal strength problem, since I have an amplifier (to 1100 MHz), and the 2 cable boxes, a Motorola DCH70?, and a Pace DC50X DTA, both have no problem getting QAM 128, with or without the signal amplifier.

Still no luck getting QAM 128 on the HVR-2250, and I see that Newegg has a sale again on HDHomeRuns, for around $140 with free shipping. I'm tempted to wait a bit longer, since I'm guessing this is really a software problem.

[moonshnr]

Anyone ran into the following error when trying to add the Digital (ATSC) tuner on the 22xx:

ERROR (-4,0x8007001f): There was an problem using the capture device. Please be sure you have the latest drivers installed for your capture device, and that they are installed correctly.

I have the latest drivers from the Hauppauge site and am runing Sage 6.6 (which I believe incorporates the previously mentioned fixes). One complication might be that I am running under Windows 7, which I haven't seen anyone in this thread mention.

The WinTV application is able to pick up the digital channels on this tuner so it doesn't seem to be a hardware problem. I am going to try the 4.8 beta drivers available at ftp://hauppauge.com/support/beta/ but I don't know if they are any newer.

This is what I get in the debug log:

Sat 9/5 13:58:56.930 [Seeker@30e4a7] Seeker awoken
Sat 9/5 13:58:56.930 [Seeker@30e4a7] MemStats: Used=28MB Total=35MB Max=399MB
Sat 9/5 13:58:56.930 [Seeker@30e4a7] MARK 1 currRecord=null enc=Hauppauge WinTV-7164 Analog Capture clients=[] ir=false
Sat 9/5 13:58:56.931 [Seeker@30e4a7] Seeker in AUTOMATIC mode nextRecord=null nextTTA=9223372036854775807
Sat 9/5 13:58:56.931 [Seeker@30e4a7] newRecord=null
Sat 9/5 13:58:56.931 [Seeker@30e4a7] NOTHING TO RECORD FOR NOW...
Sat 9/5 13:58:56.931 [Seeker@30e4a7] Checking video directories for new files
Sat 9/5 13:58:56.932 [Seeker@30e4a7] Diskspace checking is running
Sat 9/5 13:58:56.932 [Seeker@30e4a7] Verifying existence of all TV media files in database fixDurs=false avoidArchive=true
Sat 9/5 13:58:56.932 [Seeker@30e4a7] Enforcing keep at most limits for the files...
Sat 9/5 13:58:56.933 [Seeker@30e4a7] Seeker clearing unwanted and partial files...
Sat 9/5 13:58:56.933 [Seeker@30e4a7] Seeker waiting for 153722846411353 mins.
Sat 9/5 13:59:19.533 [Ministry@1e91259] Ministry is waiting for 180 sec
Sat 9/5 13:59:36.673 [PooledThread@16068c9] Called Seeker.requestWatch(FA[A[345779,0,"Súper sábado sensacional",0@0905.13:26,5256000]]) hostname=/127.0.0.1:49834@@SAGETV_PROCESS_LOCAL_UI
Sat 9/5 13:59:36.674 [PooledThread@16068c9] findBestEncoderForNow(FA[A[345779,0,"Súper sábado sensacional",0@0905.13:26,5256000]] record=false host=/127.0.0.1:49834@@SAGETV_PROCESS_LOCAL_UI)
Sat 9/5 13:59:36.674 [PooledThread@16068c9] foundBestEncoder3=sage.ce$c@9a8200[Hauppauge WinTV-7164 Analog Capture]
Sat 9/5 13:59:36.674 [PooledThread@16068c9] MARK 1 currRecord=null enc=Hauppauge WinTV-7164 Analog Capture clients=[/127.0.0.1:49834@@SAGETV_PROCESS_LOCAL_UI] ir=false
Sat 9/5 13:59:36.674 [PooledThread@16068c9] defaultRecord=A[346374,346372,"Súper sábado sensacional",3@0905.13:00,120]
Sat 9/5 13:59:36.675 [PooledThread@16068c9] Seeker in AUTOMATIC mode nextRecord=null nextTTA=9223372036854775807
Sat 9/5 13:59:36.675 [PooledThread@16068c9] FORCE WATCH executing clients=[/127.0.0.1:49834@@SAGETV_PROCESS_LOCAL_UI]
Sat 9/5 13:59:36.675 [PooledThread@16068c9] newRecord=FA[A[345779,0,"Súper sábado sensacional",0@0905.13:26,5256000]]
Sat 9/5 13:59:36.675 [PooledThread@16068c9] Change in record to another show. Entering device record mode. - LATER
Sat 9/5 13:59:36.675 [PooledThread@16068c9] Change in record to another show. Entering device record mode. - NOW
Sat 9/5 13:59:36.676 [PooledThread@16068c9] Seeker.startRecord(Hauppauge WinTV-7164 Analog Capture FA[A[345779,0,"Súper sábado sensacional",0@0905.13:26,5256000]], currTime=Sat 9/5 13:59:36.674) currRecord=null switch=false
Sat 9/5 13:59:36.676 [PooledThread@16068c9] Setting up MMC video for recording new show & tuning channel conn=Hauppauge WinTV-7164 Analog Capture Digital TV Tuner
Sat 9/5 13:59:36.676 [PooledThread@16068c9] Using quality setting "Great" for recording
Sat 9/5 13:59:36.676 [PooledThread@16068c9] Seeker resetting the encoder because it'll pass the max duration
Sat 9/5 13:59:36.677 [PooledThread@16068c9] MediaFile startSegment enc=Hauppauge WinTV-7164 Analog Capture WUVC-DT MediaFile[id=345779 FA[A[345779,0,"Súper sábado sensacional",0@0905.13:26,5256000]] host=Mach encodedBy=Hauppauge WinTV-7164 Analog Capture Digital TV Tuner format=MPEG2-PS 0:00:00 0 kbps [] D:\Video\TV Recordings\HauppaugeWinTV7164AnalogCaptureDigitalTVTuner-0.mpgbuf, Seg0[Sat 9/5 13:48:55.025-Sat 9/5 13:48:56.666]]
Sat 9/5 13:59:36.686 [PooledThread@16068c9] Seeker channel string=
Sat 9/5 13:59:36.687 [MainMsg@144d0c6] autotune0 digital tuner 'Hauppauge WinTV-7164 Analog Capture-0' num=38-40-1 (ver 3.1)
Sat 9/5 13:59:36.687 [MainMsg@144d0c6] Splitter Filter set output mpeg2 format 
Sat 9/5 13:59:37.195 [MainMsg@144d0c6] DONE: autotune0 hr=0x0 locked:0
Sat 9/5 13:59:37.197 [MainMsg@144d0c6] setEncodingProperties0 100863312 Great
Sat 9/5 13:59:37.197 [MainMsg@144d0c6] Set encoding property audiooutputmode to 0
Sat 9/5 13:59:37.197 [MainMsg@144d0c6] Set encoding property audiocrc to 0
Sat 9/5 13:59:37.197 [MainMsg@144d0c6] Set encoding property gopsize to 15
Sat 9/5 13:59:37.197 [MainMsg@144d0c6] Set encoding property videobitrate to 3800000
Sat 9/5 13:59:37.197 [MainMsg@144d0c6] Set encoding property inversetelecine to 0
Sat 9/5 13:59:37.197 [MainMsg@144d0c6] Set encoding property closedgop to 0
Sat 9/5 13:59:37.197 [MainMsg@144d0c6] Set encoding property vbr to 0
Sat 9/5 13:59:37.197 [MainMsg@144d0c6] Set encoding property outputstreamtype to 10
Sat 9/5 13:59:37.197 [MainMsg@144d0c6] Set encoding property width to 720
Sat 9/5 13:59:37.197 [MainMsg@144d0c6] Set encoding property height to 480
Sat 9/5 13:59:37.198 [MainMsg@144d0c6] Set encoding property audiobitrate to 384
Sat 9/5 13:59:37.198 [MainMsg@144d0c6] Set encoding property audiosampling to 48000
Sat 9/5 13:59:37.198 [MainMsg@144d0c6] Set encoding property disablefilter to 1
Sat 9/5 13:59:37.198 [MainMsg@144d0c6] Set encoding property medianfilter to 3
Sat 9/5 13:59:37.198 [MainMsg@144d0c6] Set encoding property fps to 30
Sat 9/5 13:59:37.198 [MainMsg@144d0c6] Set encoding property ipb to 0
Sat 9/5 13:59:37.198 [MainMsg@144d0c6] Set encoding property deinterlace to 0
Sat 9/5 13:59:37.198 [MainMsg@144d0c6] Set encoding property aspectratio to 1
Sat 9/5 13:59:37.198 [MainMsg@144d0c6] setupEncoding0 called for 100863312 'Hauppauge WinTV-7164 Analog Capture-0' (ver 1.0)
Sat 9/5 13:59:38.454 [MainMsg@144d0c6] QAM:Got capture drv info for QAM mfg:'Hauppauge' Hauppauge WinTV-7164 Analog Capture-0
Sat 9/5 13:59:38.454 [MainMsg@144d0c6] QAM: Hauppauge QAM interface not found (0) hr=0x80070492 at Hauppauge WinTV-7164 Analog Capture-0 
Sat 9/5 13:59:38.454 [MainMsg@144d0c6] QAM:not supported Hauppauge WinTV-7164 Analog Capture-0
Sat 9/5 13:59:38.454 [MainMsg@144d0c6] Encoding to file D:\Video\TV Recordings\HauppaugeWinTV7164AnalogCaptureDigitalTVTuner-0.mpgbuf
Sat 9/5 13:59:38.455 [MainMsg@144d0c6] setupEncoding0 Trace27 
Sat 9/5 13:59:38.455 [MainMsg@144d0c6] setupEncoding0 Trace28 
Sat 9/5 13:59:38.455 [MainMsg@144d0c6] startEncoding0 called for 'Hauppauge WinTV-7164 Analog Capture-0'
Sat 9/5 13:59:38.750 [MainMsg@144d0c6] Failed: startEncoding0 Run return code:8007001f  
Sat 9/5 13:59:38.750 [MainMsg@144d0c6] Built:sage.EncodingException: ERROR (-4,0x8007001f): There was an problem using the capture device. Please be sure you have the latest drivers installed for your capture device, and that they are installed correctly.
Sat 9/5 13:59:38.751 [PooledThread@16068c9] Sending hook to client for MediaPlayerError args=[Capture, ERROR (-4,0x8007001f): There was an problem using the capture device. Please be sure you have the latest drivers installed for your capture device, and that they are installed correctly.]
Sat 9/5 13:59:38.751 [MsgManager@9ddde9] Sending hook to client for SystemStatusChanged args=[]
Sat 9/5 13:59:38.953 [PooledThread@16068c9] Seeker.finishWatch(/127.0.0.1:49834@@SAGETV_PROCESS_LOCAL_UI)
Sat 9/5 13:59:38.953 [Seeker@30e4a7] Seeker awoken
Sat 9/5 13:59:38.953 [Scheduler@195ddb5] Scheduler awoken
Sat 9/5 13:59:38.954 [Seeker@30e4a7] MemStats: Used=29MB Total=35MB Max=399MB
Sat 9/5 13:59:38.954 [Scheduler@195ddb5] Scheduler.updateSchedule() called time=Sat 9/5 13:59:38.954 manual=[] schedules={Hauppauge WinTV-7164 Analog Capture=[Sched=[] MustSee=[]]} scheduleRandSize=0
Sat 9/5 13:59:38.954 [Seeker@30e4a7] MARK 1 currRecord=FA[A[345779,0,"Súper sábado sensacional",0@0905.13:26,5256000]] enc=Hauppauge WinTV-7164 Analog Capture clients=[] ir=false
Sat 9/5 13:59:38.954 [Scheduler@195ddb5] # Airs=0
Sat 9/5 13:59:38.954 [Seeker@30e4a7] Current record is over.
Sat 9/5 13:59:38.954 [Scheduler@195ddb5] MUST SEE FINAL-Hauppauge WinTV-7164 Analog Capture-[]
Sat 9/5 13:59:38.955 [Scheduler@195ddb5] Evaluating Potentials
Sat 9/5 13:59:38.955 [Scheduler@195ddb5] COMPLETE SCHEDULE-----**&^%&*-------COMPLETE SCHEDULE
Sat 9/5 13:59:38.955 [Seeker@30e4a7] Seeker.endRecord(Sat 9/5 13:59:38.954) currRecord=FA[A[345779,0,"Súper sábado sensacional",0@0905.13:26,5256000]]
Sat 9/5 13:59:38.955 [Scheduler@195ddb5] Hauppauge WinTV-7164 Analog Capture
Sat 9/5 13:59:38.955 [Seeker@30e4a7] VF.submitJob(VFJob[InactiveFile r=0.0 t=0 file=null ifn=D:\Video\TV Recordings\HauppaugeWinTV7164AnalogCaptureDigitalTVTuner-0.mpgbuf])
Sat 9/5 13:59:38.955 [Scheduler@195ddb5] []
Sat 9/5 13:59:38.956 [MainMsg@144d0c6] stopEncoding0 called (config:0x8810)
Sat 9/5 13:59:38.956 [MainMsg@144d0c6] stopEncoding0 trace 1 0x6190054
Sat 9/5 13:59:38.956 [MainMsg@144d0c6] stopEncoding0 trace 2
Sat 9/5 13:59:38.956 [MainMsg@144d0c6] stopEncoding0 trace 3 0xedfb34
Sat 9/5 13:59:38.956 [MainMsg@144d0c6] stopEncoding0 trace 4
Sat 9/5 13:59:38.956 [MainMsg@144d0c6] Stopped graph res=0x0
Sat 9/5 13:59:38.957 [MainMsg@144d0c6] stopEncoding0 trace 5
Sat 9/5 13:59:38.973 [Seeker@30e4a7] Seeker in AUTOMATIC mode nextRecord=null nextTTA=9223372036854775807
Sat 9/5 13:59:38.973 [Seeker@30e4a7] newRecord=null
Sat 9/5 13:59:38.974 [Seeker@30e4a7] NOTHING TO RECORD FOR NOW...
Sat 9/5 13:59:38.974 [Seeker@30e4a7] Checking video directories for new files
Sat 9/5 13:59:38.974 [Seeker@30e4a7] Diskspace checking is running
Sat 9/5 13:59:38.974 [Seeker@30e4a7] Verifying existence of all TV media files in database fixDurs=false avoidArchive=true
Sat 9/5 13:59:38.974 [Seeker@30e4a7] Enforcing keep at most limits for the files...
Sat 9/5 13:59:38.975 [Seeker@30e4a7] Seeker clearing unwanted and partial files...
Sat 9/5 13:59:38.975 [Seeker@30e4a7] Seeker waiting for 153722846411353 mins.
Sat 9/5 13:59:38.976 [Seeker@30e4a7] Seeker awoken
Sat 9/5 13:59:38.976 [Seeker@30e4a7] MemStats: Used=29MB Total=35MB Max=399MB
Sat 9/5 13:59:38.976 [Seeker@30e4a7] MARK 1 currRecord=null enc=Hauppauge WinTV-7164 Analog Capture clients=[] ir=false
Sat 9/5 13:59:38.976 [Seeker@30e4a7] Seeker in AUTOMATIC mode nextRecord=null nextTTA=9223372036854775807
Sat 9/5 13:59:38.976 [Seeker@30e4a7] newRecord=null
Sat 9/5 13:59:38.976 [Seeker@30e4a7] NOTHING TO RECORD FOR NOW...
Sat 9/5 13:59:38.976 [Seeker@30e4a7] Checking video directories for new files
Sat 9/5 13:59:38.977 [Seeker@30e4a7] Diskspace checking is running
Sat 9/5 13:59:38.977 [Seeker@30e4a7] Verifying existence of all TV media files in database fixDurs=false avoidArchive=true
Sat 9/5 13:59:38.977 [Seeker@30e4a7] Enforcing keep at most limits for the files...
Sat 9/5 13:59:38.977 [Seeker@30e4a7] Seeker clearing unwanted and partial files...
Sat 9/5 13:59:38.977 [Seeker@30e4a7] Seeker waiting for 153722846411353 mins.
Sat 9/5 13:59:39.002 [Scheduler@195ddb5] Scheduler awoken
Sat 9/5 13:59:39.002 [Scheduler@195ddb5] Scheduler.updateSchedule() called time=Sat 9/5 13:59:39.002 manual=[] schedules={Hauppauge WinTV-7164 Analog Capture=[Sched=[] MustSee=[]]} scheduleRandSize=0
Sat 9/5 13:59:39.002 [Scheduler@195ddb5] # Airs=0
Sat 9/5 13:59:39.002 [Scheduler@195ddb5] MUST SEE FINAL-Hauppauge WinTV-7164 Analog Capture-[]
Sat 9/5 13:59:39.002 [Scheduler@195ddb5] Evaluating Potentials
Sat 9/5 13:59:39.002 [Scheduler@195ddb5] COMPLETE SCHEDULE-----**&^%&*-------COMPLETE SCHEDULE
Sat 9/5 13:59:39.003 [Scheduler@195ddb5] Hauppauge WinTV-7164 Analog Capture
Sat 9/5 13:59:39.003 [Scheduler@195ddb5] []
Sat 9/5 13:59:39.003 [Seeker@30e4a7] Seeker awoken
Sat 9/5 13:59:39.003 [Seeker@30e4a7] MemStats: Used=29MB Total=35MB Max=399MB
Sat 9/5 13:59:39.003 [Seeker@30e4a7] MARK 1 currRecord=null enc=Hauppauge WinTV-7164 Analog Capture clients=[] ir=false
Sat 9/5 13:59:39.003 [Seeker@30e4a7] Seeker in AUTOMATIC mode nextRecord=null nextTTA=9223372036854775807
Sat 9/5 13:59:39.003 [Seeker@30e4a7] newRecord=null
Sat 9/5 13:59:39.004 [Seeker@30e4a7] NOTHING TO RECORD FOR NOW...
Sat 9/5 13:59:39.004 [Seeker@30e4a7] Checking video directories for new files
Sat 9/5 13:59:39.004 [Seeker@30e4a7] Diskspace checking is running
Sat 9/5 13:59:39.004 [Seeker@30e4a7] Verifying existence of all TV media files in database fixDurs=false avoidArchive=true
Sat 9/5 13:59:39.004 [Seeker@30e4a7] Enforcing keep at most limits for the files...
Sat 9/5 13:59:39.005 [Seeker@30e4a7] Seeker clearing unwanted and partial files...
Sat 9/5 13:59:39.005 [Seeker@30e4a7] Seeker waiting for 153722846411353 mins.
Sat 9/5 13:59:39.224 [Scheduler@195ddb5] Scheduler awoken
Sat 9/5 13:59:39.224 [Scheduler@195ddb5] Scheduler.updateSchedule() called time=Sat 9/5 13:59:39.224 manual=[] schedules={Hauppauge WinTV-7164 Analog Capture=[Sched=[] MustSee=[]]} scheduleRandSize=0
Sat 9/5 13:59:39.224 [Scheduler@195ddb5] # Airs=0
Sat 9/5 13:59:39.224 [Scheduler@195ddb5] MUST SEE FINAL-Hauppauge WinTV-7164 Analog Capture-[]
Sat 9/5 13:59:39.225 [Scheduler@195ddb5] Evaluating Potentials
Sat 9/5 13:59:39.225 [Scheduler@195ddb5] COMPLETE SCHEDULE-----**&^%&*-------COMPLETE SCHEDULE
Sat 9/5 13:59:39.225 [Scheduler@195ddb5] Hauppauge WinTV-7164 Analog Capture
Sat 9/5 13:59:39.225 [Scheduler@195ddb5] []
Sat 9/5 13:59:39.225 [Seeker@30e4a7] Seeker awoken
Sat 9/5 13:59:39.225 [Seeker@30e4a7] MemStats: Used=29MB Total=35MB Max=399MB
Sat 9/5 13:59:39.226 [Seeker@30e4a7] MARK 1 currRecord=null enc=Hauppauge WinTV-7164 Analog Capture clients=[] ir=false
Sat 9/5 13:59:39.226 [Seeker@30e4a7] Seeker in AUTOMATIC mode nextRecord=null nextTTA=9223372036854775807
Sat 9/5 13:59:39.226 [Seeker@30e4a7] newRecord=null
Sat 9/5 13:59:39.226 [Seeker@30e4a7] NOTHING TO RECORD FOR NOW...
Sat 9/5 13:59:39.226 [Seeker@30e4a7] Checking video directories for new files
Sat 9/5 13:59:39.227 [Seeker@30e4a7] Diskspace checking is running
Sat 9/5 13:59:39.227 [Seeker@30e4a7] Verifying existence of all TV media files in database fixDurs=false avoidArchive=true
Sat 9/5 13:59:39.227 [Seeker@30e4a7] Enforcing keep at most limits for the files...
Sat 9/5 13:59:39.228 [Seeker@30e4a7] Seeker clearing unwanted and partial files...
Sat 9/5 13:59:39.228 [Seeker@30e4a7] Seeker waiting for 153722846411353 mins.

[scat]

moonshnr

This where I have been getting Prerelease drivers: ftp://haupauge.com/Support/HVR2250/

Scat

[SHS]

If want latest drivers there rigth here
http://www.shspvr.com/smf/index.php?topic=12133.0

[babgvant]

Originally Posted by moonshnr

Anyone ran into the following error when trying to add the Digital (ATSC) tuner on the 22xx:

ERROR (-4,0x8007001f): There was an problem using the capture device. Please be sure you have the latest drivers installed for your capture device, and that they are installed correctly.

I have the latest drivers from the Hauppauge site and am runing Sage 6.6 (which I believe incorporates the previously mentioned fixes). One complication might be that I am running under Windows 7, which I haven't seen anyone in this thread mention.

I have the same problem on 7 with the second tuner, the first one works fine.

[moonshnr]

Thanks for the link, I had noticed it earlier but misread the version number and thought they were both older than the current release. Still no luck with fixing the error though.

I also have a 1800 so I will try pulling it and see if the 2200 works when it is the only tuner.

[babgvant]

Originally Posted by moonshnr

I also have a 1800 so I will try pulling it and see if the 2200 works when it is the only tuner.

To be clear, I meant the first tuner in the 2250 works. I have another single tuner card in the box, and it's presence has no impact.