|
SageTV Australia/New Zealand SageTV and SageTV Recorder Users from the Land Down Under - This forum is for you to post about specific issues using SageTV software in Australia and New Zealand. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Which tuner are you using?
I have a single tuner - Leadtek Winfast DTV-1000t - in my Sage server, and I can received all the local digital channels OK.
Lately I have been getting frequent application errors (see this discussion), which sometimes bring down the whole machine (BSOD). When the server is not crashing, I also get some bad recording - details here. I was just wondering what DVB-T tuner are people using in Australia? Are you experiencing similar problems? Or should I change to a different tuner, which will operate better than my current one?
__________________
SageTV 6.6.2 / 42" Plasma Panasonic TH-42PX600A/ Intel Pentium DC E6500/ 2Gb Ram/KWorld DVB-T PC160-2T/ Logitech Harmony Remote X360/ Gigabyte GeForce 8500 GT (Silent)/ Winfast DTV1000T/ WD Caviar Green 808Gb HD/ Win 7 Ultimate/ Mission Cinema 7/ Denon AVR-1800 |
#2
|
|||
|
|||
Hi,
I use two of these, giving me 4 tuners. My sage box has been in Brisbane and now Melbourne. They dont skip a beat, and i dont get any issues. DNTV Live! Dual Hybrid PCI-E S3 http://www.digitalnow.com.au/dvbtcards.html Is it live tv or recorded tv that gives you problems ? |
#3
|
|||
|
|||
I use two of the Nova T-500 http://www.newmagic.com.au/NM_Pages/...T_500_MCE.html
I did have trouble with my previous card but I traced it back to the splitter on the aerial. So my advice is to check your aerial connections and make sure they are up to scratch,that can be the cause of similar problems to what you are experiencing. |
#4
|
|||
|
|||
Quote:
__________________
SageTV 6.6.2 / 42" Plasma Panasonic TH-42PX600A/ Intel Pentium DC E6500/ 2Gb Ram/KWorld DVB-T PC160-2T/ Logitech Harmony Remote X360/ Gigabyte GeForce 8500 GT (Silent)/ Winfast DTV1000T/ WD Caviar Green 808Gb HD/ Win 7 Ultimate/ Mission Cinema 7/ Denon AVR-1800 |
#5
|
|||
|
|||
Quote:
Before the current beta cycle (not sure how far back), the recorded stream usually has time code error in it, which causes skipping forward/backward to wrong location of the file.
__________________
SageTV 6.6.2 / 42" Plasma Panasonic TH-42PX600A/ Intel Pentium DC E6500/ 2Gb Ram/KWorld DVB-T PC160-2T/ Logitech Harmony Remote X360/ Gigabyte GeForce 8500 GT (Silent)/ Winfast DTV1000T/ WD Caviar Green 808Gb HD/ Win 7 Ultimate/ Mission Cinema 7/ Denon AVR-1800 |
#6
|
|||
|
|||
Quote:
Sage would work fine most of the time but then I would experience recordings with no timeline or audio and would have to run them through VideoRedo. I'm not saying it is your problem but I would suspect the aerial connection, now I know what fixed my recordings. It's something you can check out and eliminate anyway. |
#7
|
|||
|
|||
So is that confirmed?? the nova-t-500 MCE works fine under SageTV? I thought these cards were for MCE only?
I need one with high sensitivity, as I am in a fringe area. Hauppage have always been good with analogue, I imagine they are up with the best in digital also? Cheers Jamie |
#8
|
|||
|
|||
I'm not in a fringe area but the nova T-500 works very well with Sage.
|
#9
|
|||
|
|||
ozfiles, I am assuming that the card only works in vista or xpmce? I'm using a vanilla xp install. Will I have to start over again with a vista install?
|
#10
|
|||
|
|||
That's all I am using, xp pro actually, so you should be fine.
The drivers are the same for xp and vista and you can get the latest drivers from here. http://www.newmagic.com.au/Support/H...a_Drivers.html |
#11
|
|||
|
|||
Thanks ozfiles.
Are you happy with the picture you get? I mean is it as smooth and clear as the onboard tuner in the TV? I find mine looks "dry" for want of a better term. And scrolling text has a slight stutter. Not quite silky smooth. I'm probably opening up a whole different can of worms here though.... |
#12
|
|||
|
|||
I'm very happy with the picture I get, very smooth and clear but I didn't expect anything less from Hauppage.
I do use the scrolling text as a benchmark and for my setup, it is as close to the tv's onboard tuner as you can get. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Live TV playing back wrong tuner... | Slipshod | SageTV Software | 0 | 04-18-2008 02:21 AM |
HVR-1600 and Svideo on QAM tuner | stevenkd | Hardware Support | 1 | 01-27-2008 08:31 PM |
Puzzled: Sage not using 3rd tuner | wvpolekat | SageTV Software | 2 | 11-15-2007 01:36 PM |
Tuner issue after HDHR install | jcato | Hardware Support | 3 | 10-17-2007 10:29 AM |
BDA Tuner Test Application | Stealth1971 | Hardware Support | 17 | 04-19-2005 10:50 AM |