SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support
Reload this Page HDHomeRun (HDHR) Prime + SageDCT
Forum Rules FAQs Community Downloads Today's Posts Search

Notices

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

Reply
Page 14 of 108 « First 41213 14 15162464 Last »
 
Thread Tools Search this Thread Display Modes
  #261  
Old 10-06-2011, 01:34 PM
phelme's Avatar
phelme phelme is offline
Sage Icon
  
Join Date: Dec 2006
Posts: 1,151
FYI. I did the SageDCT 2.0 upgrade and all is well. Removing the app/service via the control panel kept my configuration.
__________________
Server: AMD 9600 Phenom on XP, Gigabyte GA-MA78GPM, 2GB RAM, 320+250+500 GB SATA drives, HDHomeRun Prime, HD-PVR x.5.1, Paterson serial
Client/Encoder:AMD 3800+ X2, 512 MB RAM, ATI X1650 XT, nMediaPC case, Hauppauge HD-PVR, Cyberlink/ArcSoft decoders, USB-UIRT
Client/Encoder: AMD 3800+ X2, 512 MB RAM, 6150 graphics, nMediaPC case, ArcSoft decoders
Client: HD300, Asus Pundit P1-AH1, AMD 3800+ X2 CPU, 1 GB RAM, 6150 graphics, ArcSoft decoders
Backup: Synology
SageTV version: FINAL
Reply With Quote
  #262  
Old 10-07-2011, 06:10 AM
Kirby's Avatar
Kirby Kirby is offline
Sage Icon
  
Join Date: Jan 2006
Posts: 1,253
Well I can say my Prime lives again! Did a power reset on both it and the TA and things work great. Still not going to touch DCT 2.0 though, 1.9 is working great, and after yesterday, I've learned my lesson: if it aint broke, dont fix it!
__________________
Sage Server: HP ProLiant N40L MicroServer, AMD Turion II Neo N40L 1.5GHz Dual Core, 8GB Ram, WHS2011 64bit, Sage 7.1.9 WHS, HDHR (1 QAM, 1 OTA), HDHR Prime 3CC, HD-PVR for copy-once movie channels
HTPC Client:Intel DH61AG, Intel G620 cpu, 8GB ram, Intel 80GB SSD, 4GB RamDisk holding Sage/Java/TMT5
Sage Client:Sage HD-200 Extender
Reply With Quote
  #263  
Old 10-07-2011, 10:53 AM
phelme's Avatar
phelme phelme is offline
Sage Icon
  
Join Date: Dec 2006
Posts: 1,151
Quote:
Originally Posted by Kirby View Post
Well I can say my Prime lives again! Did a power reset on both it and the TA and things work great. Still not going to touch DCT 2.0 though, 1.9 is working great, and after yesterday, I've learned my lesson: if it aint broke, dont fix it!
Good to hear. I see one of the fixes in that SD update is rather critical, preventing the Prime from losing its mind after several hundred tunings. But that's enough of a a buffer I can wait a bit until the next.

SageDCT 2.0: I haven't tried the channel scanning feature yet, but otherwise it seems solid.
__________________
Server: AMD 9600 Phenom on XP, Gigabyte GA-MA78GPM, 2GB RAM, 320+250+500 GB SATA drives, HDHomeRun Prime, HD-PVR x.5.1, Paterson serial
Client/Encoder:AMD 3800+ X2, 512 MB RAM, ATI X1650 XT, nMediaPC case, Hauppauge HD-PVR, Cyberlink/ArcSoft decoders, USB-UIRT
Client/Encoder: AMD 3800+ X2, 512 MB RAM, 6150 graphics, nMediaPC case, ArcSoft decoders
Client: HD300, Asus Pundit P1-AH1, AMD 3800+ X2 CPU, 1 GB RAM, 6150 graphics, ArcSoft decoders
Backup: Synology
SageTV version: FINAL
Reply With Quote
  #264  
Old 10-07-2011, 12:55 PM
doncote0's Avatar
doncote0 doncote0 is offline
Sage Aficionado
  
Join Date: Jun 2004
Location: Seattle, WA
Posts: 396
Smile SDV (Switched Digital Video)
Quote:
Originally Posted by Kirby View Post
Well I can say my Prime lives again! Did a power reset on both it and the TA and things work great. Still not going to touch DCT 2.0 though, 1.9 is working great, and after yesterday, I've learned my lesson: if it aint broke, dont fix it!
What provider are you using that needs a Tuning Adapter (TA), Kirby?

Just wondering, because my local cable co claimed ignorance when I asked about a TA. (Of course, this was the same one that initially said I couldn't do a self install of my MCard until I pushed the issue.)
Reply With Quote
  #265  
Old 10-07-2011, 12:57 PM
Kirby's Avatar
Kirby Kirby is offline
Sage Icon
  
Join Date: Jan 2006
Posts: 1,253
Quote:
Originally Posted by doncote0 View Post
What provider are you using that needs a Tuning Adapter (TA), Kirby?

Just wondering, because my local cable co claimed ignorance when I asked about a TA. (Of course, this was the same one that initially said I couldn't do a self install of my MCard until I pushed the issue.)
Charter requires them in most/all of their areas due to their refusal to drop analog channels and go all digital. I believe Comcast does not need them as I believe Comcast went all digital nationwide?

who is your provider up there?
__________________
Sage Server: HP ProLiant N40L MicroServer, AMD Turion II Neo N40L 1.5GHz Dual Core, 8GB Ram, WHS2011 64bit, Sage 7.1.9 WHS, HDHR (1 QAM, 1 OTA), HDHR Prime 3CC, HD-PVR for copy-once movie channels
HTPC Client:Intel DH61AG, Intel G620 cpu, 8GB ram, Intel 80GB SSD, 4GB RamDisk holding Sage/Java/TMT5
Sage Client:Sage HD-200 Extender
Reply With Quote
  #266  
Old 10-07-2011, 01:16 PM
doncote0's Avatar
doncote0 doncote0 is offline
Sage Aficionado
  
Join Date: Jun 2004
Location: Seattle, WA
Posts: 396
Red face Comca$t
Comcast for me. They told me I didn't need a TA. I was skeptical after their previous attempt to mind-trick me.

COMCAST: *Gritting teeth* "You must do a professional install. You cannot self install a cable card." *waving hand*

ME: "Your mind tricks do not work on me Darth CableCo. Give me my Mcard now, and stop waving your hand in the air. You want to feel the Force? How about I force my foot up your..."

COMCAST: "Here you go. We never said you cannot self install a cable card." *motions*

ME: "Okay..., whatever, thanks....Did you just waive your hand again?"

COMCAST: "No." *waives hand*

ME: *sigh*
Reply With Quote
  #267  
Old 10-07-2011, 01:18 PM
Kirby's Avatar
Kirby Kirby is offline
Sage Icon
  
Join Date: Jan 2006
Posts: 1,253
That was good for a friday afternoon laugh!
__________________
Sage Server: HP ProLiant N40L MicroServer, AMD Turion II Neo N40L 1.5GHz Dual Core, 8GB Ram, WHS2011 64bit, Sage 7.1.9 WHS, HDHR (1 QAM, 1 OTA), HDHR Prime 3CC, HD-PVR for copy-once movie channels
HTPC Client:Intel DH61AG, Intel G620 cpu, 8GB ram, Intel 80GB SSD, 4GB RamDisk holding Sage/Java/TMT5
Sage Client:Sage HD-200 Extender
Reply With Quote
  #268  
Old 10-07-2011, 04:28 PM
timconroy timconroy is offline
New Member
  
Join Date: Jun 2011
Location: Arlington, VA
Posts: 3
Please Help
So after reading all 14 pages of this thread, i believe i may be the only one still trying to get my Prime to work. i followed all the steps but when i try to tune a channel i get "no data" and the green light on the front of the Prime blinks green then eventually turns off and i have no idea why. Has anyone else come across a similar situation?
Reply With Quote
  #269  
Old 10-08-2011, 05:08 AM
scoful's Avatar
scoful scoful is offline
Sage Aficionado
  
Join Date: Jun 2006
Location: Lawrence, Kansas
Posts: 373
Solid for a couple of weeks now.
Thanks to Andy (and Zoop's firewall tip) my HDHR Prime has been running great for a couple of weeks now. Between 3 cablecard tuners and 3 QAM tuners the family has more than enough TV to watch. (And thanks to my cable company for not flagging ANY of my channels!)
__________________
SageTV 9 / 3 SageTV Clients / Ceton InfiniTV 6 / ComSkip
Reply With Quote
  #270  
Old 10-08-2011, 08:27 PM
Gustovier Gustovier is offline
Sage Aficionado
  
Join Date: Nov 2010
Location: Chicago
Posts: 460
Quote:
Originally Posted by Sparhawk6 View Post
Another update: All the channels now have their flags set to "Copy Freely". It worked out great. I'm very happy with Comcast right now.

Wait a sec here. ALL channels? As in premiums such as hbo, Showtime, etc?? Some other person on here mentioned that too, but I dismissed it cause I didn't think that could be true.
Reply With Quote
  #271  
Old 10-08-2011, 09:47 PM
Gustovier Gustovier is offline
Sage Aficionado
  
Join Date: Nov 2010
Location: Chicago
Posts: 460
So I was bored with nothing to do, and I decided to mess up my system by upgrading to sagedct 2.0 and the latest prime firmware 20111003beta2 I don't think anyone here has really installed it yet. But now I can't tune to any channels within sagetv. All 3 of the tuners within the The prime works fine within homerun quickTV app. I tried the usual removing the tuners within sage, regenerating the assignments and overwriting what was there in the sage.properties file. No dice. Setting the logs to verbose and it looks like sagedct is just plain ol not receiving a stream from the prime.


Below is the log of me trying issue a start and stop to record channel 189 through the sagedct service interface..
Code:
 2011/10/08 22:46:43.55 : SageDCT Service start
2011/10/08 22:46:43.55 : Current User: NT AUTHORITY\SYSTEM
2011/10/08 22:46:43.56 : Host IP: 192.168.1.110
2011/10/08 22:46:43.58 : NIC Info IP: 192.168.1.110 Name: Local Area Connection
2011/10/08 22:46:43.58 : NIC Info IP: 127.0.0.1 Name: Loopback Pseudo-Interface 1
2011/10/08 22:46:43.62 : New UPnPMOCURFind
2011/10/08 22:46:43.63 : SageDCT Service complete start
2011/10/08 22:46:43.63 : CleanLogs
2011/10/08 22:46:43.89 : UPnPDevice Found: HDHomeRun Prime Tuner ID: uuid:EE2FA556-AF48-35CB-AD6B-33ECD727C344
2011/10/08 22:46:43.90 : NIC: {90000140-AC3C-4EBB-9BEB-2BD4735B2B0D} Hosting Device uuid:EE2FA556-AF48-35CB-AD6B-33ECD727C344 - HDHomeRun Prime Tuner 1310989B-2
2011/10/08 22:46:43.92 : Tuner uuid:EE2FA556-AF48-35CB-AD6B-33ECD727C344 found.
2011/10/08 22:46:43.92 : Add Static Network Encoder for uuid:EE2FA556-AF48-35CB-AD6B-33ECD727C344 on 6976
2011/10/08 22:46:43.92 : SageDCTTuner tuner port: 6976 tunerDevice: HDHomeRun Prime Tuner 1310989B-2
2011/10/08 22:46:43.92 : Tuner: 0	SupportedOSVersion = 6.1
ExecutingExePath = C:\Program Files\babgvant.com\SageDCT
EntryExePath = C:\Program Files\babgvant.com\SageDCT
DataPath = C:\ProgramData\SageDCT
BinPath = C:\Program Files\babgvant.com\SageDCT
LogLevel = Verbose
ReplacePath = 
StartPort = 6970
RtpStartPort = 5010
DCTRegex = System.String[]
WriteBufferSize = 1024
LogAge = 10
DebugDataReceive = False
NoopGetsFirmware = False
RtpBufferSize = 131072
RewritePAT = False
AsyncStop = False
AutoResetWaitSeconds = 2
AutoReset = True
StaticTunerAssignments = True
DelayServiceStart = 0
RemoveDuplicateChannels = True
RemoveSDChannels = True
HDSuffix = HD;-DT;DT
WriteThrough = False

2011/10/08 22:46:43.93 : SageDCTTuner 6976 done start
2011/10/08 22:46:43.93 : AcceptConnections: 6976
2011/10/08 22:46:43.93 : Port: 6976
2011/10/08 22:46:43.93 : Before Accept: 6976
2011/10/08 22:46:44.27 : 6976 Channels Found: 527
2011/10/08 22:46:44.27 : Remove SD Channels
2011/10/08 22:46:44.30 : 6976 Channels Listed: 527 Channels Removed: 0
2011/10/08 22:46:44.40 : UPnPDevice Found: HDHomeRun Prime Tuner ID: uuid:AB0A2106-0DC2-325C-9E65-3767D377078E
2011/10/08 22:46:44.42 : NIC: {90000140-AC3C-4EBB-9BEB-2BD4735B2B0D} Hosting Device uuid:AB0A2106-0DC2-325C-9E65-3767D377078E - HDHomeRun Prime Tuner 1310989B-0
2011/10/08 22:46:44.43 : Tuner uuid:AB0A2106-0DC2-325C-9E65-3767D377078E found.
2011/10/08 22:46:44.43 : Add Static Network Encoder for uuid:AB0A2106-0DC2-325C-9E65-3767D377078E on 6981
2011/10/08 22:46:44.43 : SageDCTTuner tuner port: 6981 tunerDevice: HDHomeRun Prime Tuner 1310989B-0
2011/10/08 22:46:44.43 : Tuner: 0	SupportedOSVersion = 6.1
ExecutingExePath = C:\Program Files\babgvant.com\SageDCT
EntryExePath = C:\Program Files\babgvant.com\SageDCT
DataPath = C:\ProgramData\SageDCT
BinPath = C:\Program Files\babgvant.com\SageDCT
LogLevel = Verbose
ReplacePath = 
StartPort = 6970
RtpStartPort = 5010
DCTRegex = System.String[]
WriteBufferSize = 1024
LogAge = 10
DebugDataReceive = False
NoopGetsFirmware = False
RtpBufferSize = 131072
RewritePAT = False
AsyncStop = False
AutoResetWaitSeconds = 2
AutoReset = True
StaticTunerAssignments = True
DelayServiceStart = 0
RemoveDuplicateChannels = True
RemoveSDChannels = True
HDSuffix = HD;-DT;DT
WriteThrough = False

2011/10/08 22:46:44.43 : SageDCTTuner 6981 done start
2011/10/08 22:46:44.43 : AcceptConnections: 6981
2011/10/08 22:46:44.43 : Port: 6981
2011/10/08 22:46:44.43 : Before Accept: 6981
2011/10/08 22:46:44.50 : UPnPDevice Found: HDHomeRun Prime Tuner ID: uuid:2E6B59A8-2F4C-38FA-BC1B-6A93A6CD23E2
2011/10/08 22:46:44.51 : NIC: {90000140-AC3C-4EBB-9BEB-2BD4735B2B0D} Hosting Device uuid:2E6B59A8-2F4C-38FA-BC1B-6A93A6CD23E2 - HDHomeRun Prime Tuner 1310989B-1
2011/10/08 22:46:44.52 : Tuner uuid:2E6B59A8-2F4C-38FA-BC1B-6A93A6CD23E2 found.
2011/10/08 22:46:44.52 : Add Static Network Encoder for uuid:2E6B59A8-2F4C-38FA-BC1B-6A93A6CD23E2 on 6978
2011/10/08 22:46:44.52 : SageDCTTuner tuner port: 6978 tunerDevice: HDHomeRun Prime Tuner 1310989B-1
2011/10/08 22:46:44.52 : Tuner: 0	SupportedOSVersion = 6.1
ExecutingExePath = C:\Program Files\babgvant.com\SageDCT
EntryExePath = C:\Program Files\babgvant.com\SageDCT
DataPath = C:\ProgramData\SageDCT
BinPath = C:\Program Files\babgvant.com\SageDCT
LogLevel = Verbose
ReplacePath = 
StartPort = 6970
RtpStartPort = 5010
DCTRegex = System.String[]
WriteBufferSize = 1024
LogAge = 10
DebugDataReceive = False
NoopGetsFirmware = False
RtpBufferSize = 131072
RewritePAT = False
AsyncStop = False
AutoResetWaitSeconds = 2
AutoReset = True
StaticTunerAssignments = True
DelayServiceStart = 0
RemoveDuplicateChannels = True
RemoveSDChannels = True
HDSuffix = HD;-DT;DT
WriteThrough = False

2011/10/08 22:46:44.52 : AcceptConnections: 6978
2011/10/08 22:46:44.52 : Port: 6978
2011/10/08 22:46:44.52 : SageDCTTuner 6978 done start
2011/10/08 22:46:44.52 : Before Accept: 6978
2011/10/08 22:46:44.54 : 6981 Channels Found: 527
2011/10/08 22:46:44.54 : Remove SD Channels
2011/10/08 22:46:44.56 : 6981 Channels Listed: 527 Channels Removed: 0
2011/10/08 22:46:44.83 : 6978 Channels Found: 527
2011/10/08 22:46:44.83 : Remove SD Channels
2011/10/08 22:46:44.86 : 6978 Channels Listed: 527 Channels Removed: 0
2011/10/08 22:46:46.14 : UPnPDevice Found: Windows Media Player Sharing ID: uuid:02596a15-3b8f-439f-b5b0-1cb022c43123
2011/10/08 22:46:46.16 : NIC: {E29AC6C2-7037-11DE-816D-806E6F6E6963} Hosting Device uuid:02596a15-3b8f-439f-b5b0-1cb022c43123 - BRENT-WINDOWS7: Brent:
2011/10/08 22:46:49.52 : After Accept: 6978
2011/10/08 22:46:49.52 : 6978 Bytes Received: 49
2011/10/08 22:46:49.53 : ProcessMessage 6978: START TunerName|189|18000000|c:\file.ts|Quality
2011/10/08 22:46:49.54 : StartRecording - 6978: Request - Channel: 189 File: c:\file.ts
2011/10/08 22:46:49.54 : No active recordings in Stop - 6978
2011/10/08 22:46:49.54 : StartRecording 6978 - WBBM HDTV(digit
2011/10/08 22:46:49.54 : 6978 Channel: 189 FilePath: c:\file.ts
2011/10/08 22:46:49.55 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:ConnectionManager Action: PrepareForConnection Refresh: False
2011/10/08 22:46:49.57 : Done ExecuteAction: PrepareForConnection
2011/10/08 22:46:49.57 : ConnectionID: 18602 AVInstanceID: 18602
2011/10/08 22:46:49.57 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: Play Refresh: False
2011/10/08 22:46:49.60 : Done ExecuteAction: Play
2011/10/08 22:46:49.60 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:CAS Action: SetChannel Refresh: False
2011/10/08 22:46:50.52 : Done ExecuteAction: SetChannel
2011/10/08 22:46:50.52 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: GetMediaInfo Refresh: False
2011/10/08 22:46:50.55 : Done ExecuteAction: GetMediaInfo
2011/10/08 22:46:50.56 : RTSP Send: DESCRIBE rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:50.56 : DESCRIBE: RTSP/1.0 200 OK

2011/10/08 22:46:50.56 : RTSP Send: SETUP rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:50.56 : RTSP Send: PLAY rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:50.57 : PLAY: RTSP/1.0 200 OK

2011/10/08 22:46:50.57 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: ProgramNumber Refresh: False
2011/10/08 22:46:50.78 : Done GetServiceVariable: ProgramNumber
2011/10/08 22:46:50.78 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: PIDList Refresh: False
2011/10/08 22:46:51.00 : Done GetServiceVariable: PIDList
2011/10/08 22:46:51.00 : ProgramNumber: 1 PIDList: 0000,0030,07C0,07C1,07C2,07C3,07C4
2011/10/08 22:46:51.00 : RTP Stop: True
2011/10/08 22:46:51.00 : RTP Start - Settings: RTP: 192.168.1.110:5014 RTCP:  File c:\file.ts - True
2011/10/08 22:46:51.00 : SageDCTTuner 6978 Send: OK
2011/10/08 22:46:51.00 : Before Accept: 6978
2011/10/08 22:46:51.01 : Start ProcessPackets
2011/10/08 22:46:52.63 : SearchComplete
2011/10/08 22:46:53.01 : ProcessPackets: No data recieved 10/8/2011 10:46:51 PM
2011/10/08 22:46:53.02 : ResetRecording - 6978
2011/10/08 22:46:53.02 : RTSP TEARDOWN - 6978
2011/10/08 22:46:53.02 : RTSP Send: TEARDOWN rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:53.02 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: GetMediaInfo Refresh: False
2011/10/08 22:46:53.05 : Done ExecuteAction: GetMediaInfo
2011/10/08 22:46:53.05 : RTSP Send: DESCRIBE rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:53.05 : RTSP/1.0 200 OK

2011/10/08 22:46:53.05 : RTSP Send: SETUP rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:53.05 : RTSP Send: PLAY rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:53.05 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: ProgramNumber Refresh: False
2011/10/08 22:46:53.26 : Done GetServiceVariable: ProgramNumber
2011/10/08 22:46:53.26 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: PIDList Refresh: False
2011/10/08 22:46:53.47 : Done GetServiceVariable: PIDList
2011/10/08 22:46:53.47 : ProgramNumber: 1 PIDList: 0000,0030,07C0,07C1,07C2,07C3,07C4
2011/10/08 22:46:53.47 : RTSP/1.0 200 OK

2011/10/08 22:46:53.47 : ResetRequired: True
2011/10/08 22:46:55.01 : ProcessPackets: No data recieved 10/8/2011 10:46:53 PM
2011/10/08 22:46:55.01 : ResetRecording - 6978
2011/10/08 22:46:55.01 : RTSP TEARDOWN - 6978
2011/10/08 22:46:55.01 : RTSP Send: TEARDOWN rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:55.02 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: GetMediaInfo Refresh: False
2011/10/08 22:46:55.05 : Done ExecuteAction: GetMediaInfo
2011/10/08 22:46:55.05 : RTSP Send: DESCRIBE rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:55.05 : RTSP/1.0 200 OK

2011/10/08 22:46:55.05 : RTSP Send: SETUP rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:55.05 : RTSP Send: PLAY rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:55.05 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: ProgramNumber Refresh: False
2011/10/08 22:46:55.26 : Done GetServiceVariable: ProgramNumber
2011/10/08 22:46:55.26 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: PIDList Refresh: False
2011/10/08 22:46:55.47 : Done GetServiceVariable: PIDList
2011/10/08 22:46:55.47 : ProgramNumber: 1 PIDList: 0000,0030,07C0,07C1,07C2,07C3,07C4
2011/10/08 22:46:55.47 : RTSP/1.0 200 OK

2011/10/08 22:46:55.47 : ResetRequired: True
2011/10/08 22:46:57.01 : ProcessPackets: No data recieved 10/8/2011 10:46:55 PM
2011/10/08 22:46:57.01 : ResetRecording - 6978
2011/10/08 22:46:57.01 : RTSP TEARDOWN - 6978
2011/10/08 22:46:57.01 : RTSP Send: TEARDOWN rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:57.02 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: GetMediaInfo Refresh: False
2011/10/08 22:46:57.05 : Done ExecuteAction: GetMediaInfo
2011/10/08 22:46:57.05 : RTSP Send: DESCRIBE rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:57.05 : RTSP/1.0 200 OK

2011/10/08 22:46:57.05 : RTSP Send: SETUP rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:57.05 : RTSP Send: PLAY rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:57.05 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: ProgramNumber Refresh: False
2011/10/08 22:46:57.08 : After Accept: 6978
2011/10/08 22:46:57.08 : 6978 Bytes Received: 6
2011/10/08 22:46:57.08 : ProcessMessage 6978: STOP
2011/10/08 22:46:57.27 : Done GetServiceVariable: ProgramNumber
2011/10/08 22:46:57.27 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: PIDList Refresh: False
2011/10/08 22:46:57.48 : Done GetServiceVariable: PIDList
2011/10/08 22:46:57.48 : ProgramNumber: 1 PIDList: 0000,0030,07C0,07C1,07C2,07C3,07C4
2011/10/08 22:46:57.48 : RTSP/1.0 200 OK

2011/10/08 22:46:57.48 : ResetRequired: True
2011/10/08 22:46:57.48 : Stop active recording: 6978
2011/10/08 22:46:57.48 : UPnP stop: 6978
2011/10/08 22:46:57.48 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: Stop Refresh: False
2011/10/08 22:46:57.51 : Done ExecuteAction: Stop
2011/10/08 22:46:57.51 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:ConnectionManager Action: ConnectionComplete Refresh: False
2011/10/08 22:46:57.52 : Done ExecuteAction: ConnectionComplete
2011/10/08 22:46:57.52 : RTSP TEARDOWN - 6978
2011/10/08 22:46:57.52 : RTSP Send: TEARDOWN rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:57.53 : RTP Stop: False
2011/10/08 22:46:57.53 : Leave ProcessPackets
2011/10/08 22:46:57.53 : SageDCTTuner 6978 Send: OK
2011/10/08 22:46:57.53 : Before Accept: 6978
Reply With Quote
  #272  
Old 10-09-2011, 06:48 AM
scoful's Avatar
scoful scoful is offline
Sage Aficionado
  
Join Date: Jun 2006
Location: Lawrence, Kansas
Posts: 373
Quote:
Originally Posted by Gustovier View Post
Wait a sec here. ALL channels? As in premiums such as hbo, Showtime, etc?? Some other person on here mentioned that too, but I dismissed it cause I didn't think that could be true.
Mine all work - Showtime/TMC included.

I'm not on ComCast though.
__________________
SageTV 9 / 3 SageTV Clients / Ceton InfiniTV 6 / ComSkip
Reply With Quote
  #273  
Old 10-09-2011, 08:14 AM
Gustovier Gustovier is offline
Sage Aficionado
  
Join Date: Nov 2010
Location: Chicago
Posts: 460
What is supposed to show correctly in the log when you do this through the sagedct control app?(I have the highest log setting on) My guess is that I shouldn't see "ProcessPackets: No data recieved" after it starts

Quote:
Originally Posted by Gustovier View Post
So I was bored with nothing to do, and I decided to mess up my system by upgrading to sagedct 2.0 and the latest prime firmware 20111003beta2 I don't think anyone here has really installed it yet. But now I can't tune to any channels within sagetv. All 3 of the tuners within the The prime works fine within homerun quickTV app. I tried the usual removing the tuners within sage, regenerating the assignments and overwriting what was there in the sage.properties file. No dice. Setting the logs to verbose and it looks like sagedct is just plain ol not receiving a stream from the prime.


Below is the log of me trying issue a start and stop to record channel 189 through the sagedct service interface..
Code:
 2011/10/08 22:46:43.55 : SageDCT Service start
2011/10/08 22:46:43.55 : Current User: NT AUTHORITY\SYSTEM
2011/10/08 22:46:43.56 : Host IP: 192.168.1.110
2011/10/08 22:46:43.58 : NIC Info IP: 192.168.1.110 Name: Local Area Connection
2011/10/08 22:46:43.58 : NIC Info IP: 127.0.0.1 Name: Loopback Pseudo-Interface 1
2011/10/08 22:46:43.62 : New UPnPMOCURFind
2011/10/08 22:46:43.63 : SageDCT Service complete start
2011/10/08 22:46:43.63 : CleanLogs
2011/10/08 22:46:43.89 : UPnPDevice Found: HDHomeRun Prime Tuner ID: uuid:EE2FA556-AF48-35CB-AD6B-33ECD727C344
2011/10/08 22:46:43.90 : NIC: {90000140-AC3C-4EBB-9BEB-2BD4735B2B0D} Hosting Device uuid:EE2FA556-AF48-35CB-AD6B-33ECD727C344 - HDHomeRun Prime Tuner 1310989B-2
2011/10/08 22:46:43.92 : Tuner uuid:EE2FA556-AF48-35CB-AD6B-33ECD727C344 found.
2011/10/08 22:46:43.92 : Add Static Network Encoder for uuid:EE2FA556-AF48-35CB-AD6B-33ECD727C344 on 6976
2011/10/08 22:46:43.92 : SageDCTTuner tuner port: 6976 tunerDevice: HDHomeRun Prime Tuner 1310989B-2
2011/10/08 22:46:43.92 : Tuner: 0	SupportedOSVersion = 6.1
ExecutingExePath = C:\Program Files\babgvant.com\SageDCT
EntryExePath = C:\Program Files\babgvant.com\SageDCT
DataPath = C:\ProgramData\SageDCT
BinPath = C:\Program Files\babgvant.com\SageDCT
LogLevel = Verbose
ReplacePath = 
StartPort = 6970
RtpStartPort = 5010
DCTRegex = System.String[]
WriteBufferSize = 1024
LogAge = 10
DebugDataReceive = False
NoopGetsFirmware = False
RtpBufferSize = 131072
RewritePAT = False
AsyncStop = False
AutoResetWaitSeconds = 2
AutoReset = True
StaticTunerAssignments = True
DelayServiceStart = 0
RemoveDuplicateChannels = True
RemoveSDChannels = True
HDSuffix = HD;-DT;DT
WriteThrough = False

2011/10/08 22:46:43.93 : SageDCTTuner 6976 done start
2011/10/08 22:46:43.93 : AcceptConnections: 6976
2011/10/08 22:46:43.93 : Port: 6976
2011/10/08 22:46:43.93 : Before Accept: 6976
2011/10/08 22:46:44.27 : 6976 Channels Found: 527
2011/10/08 22:46:44.27 : Remove SD Channels
2011/10/08 22:46:44.30 : 6976 Channels Listed: 527 Channels Removed: 0
2011/10/08 22:46:44.40 : UPnPDevice Found: HDHomeRun Prime Tuner ID: uuid:AB0A2106-0DC2-325C-9E65-3767D377078E
2011/10/08 22:46:44.42 : NIC: {90000140-AC3C-4EBB-9BEB-2BD4735B2B0D} Hosting Device uuid:AB0A2106-0DC2-325C-9E65-3767D377078E - HDHomeRun Prime Tuner 1310989B-0
2011/10/08 22:46:44.43 : Tuner uuid:AB0A2106-0DC2-325C-9E65-3767D377078E found.
2011/10/08 22:46:44.43 : Add Static Network Encoder for uuid:AB0A2106-0DC2-325C-9E65-3767D377078E on 6981
2011/10/08 22:46:44.43 : SageDCTTuner tuner port: 6981 tunerDevice: HDHomeRun Prime Tuner 1310989B-0
2011/10/08 22:46:44.43 : Tuner: 0	SupportedOSVersion = 6.1
ExecutingExePath = C:\Program Files\babgvant.com\SageDCT
EntryExePath = C:\Program Files\babgvant.com\SageDCT
DataPath = C:\ProgramData\SageDCT
BinPath = C:\Program Files\babgvant.com\SageDCT
LogLevel = Verbose
ReplacePath = 
StartPort = 6970
RtpStartPort = 5010
DCTRegex = System.String[]
WriteBufferSize = 1024
LogAge = 10
DebugDataReceive = False
NoopGetsFirmware = False
RtpBufferSize = 131072
RewritePAT = False
AsyncStop = False
AutoResetWaitSeconds = 2
AutoReset = True
StaticTunerAssignments = True
DelayServiceStart = 0
RemoveDuplicateChannels = True
RemoveSDChannels = True
HDSuffix = HD;-DT;DT
WriteThrough = False

2011/10/08 22:46:44.43 : SageDCTTuner 6981 done start
2011/10/08 22:46:44.43 : AcceptConnections: 6981
2011/10/08 22:46:44.43 : Port: 6981
2011/10/08 22:46:44.43 : Before Accept: 6981
2011/10/08 22:46:44.50 : UPnPDevice Found: HDHomeRun Prime Tuner ID: uuid:2E6B59A8-2F4C-38FA-BC1B-6A93A6CD23E2
2011/10/08 22:46:44.51 : NIC: {90000140-AC3C-4EBB-9BEB-2BD4735B2B0D} Hosting Device uuid:2E6B59A8-2F4C-38FA-BC1B-6A93A6CD23E2 - HDHomeRun Prime Tuner 1310989B-1
2011/10/08 22:46:44.52 : Tuner uuid:2E6B59A8-2F4C-38FA-BC1B-6A93A6CD23E2 found.
2011/10/08 22:46:44.52 : Add Static Network Encoder for uuid:2E6B59A8-2F4C-38FA-BC1B-6A93A6CD23E2 on 6978
2011/10/08 22:46:44.52 : SageDCTTuner tuner port: 6978 tunerDevice: HDHomeRun Prime Tuner 1310989B-1
2011/10/08 22:46:44.52 : Tuner: 0	SupportedOSVersion = 6.1
ExecutingExePath = C:\Program Files\babgvant.com\SageDCT
EntryExePath = C:\Program Files\babgvant.com\SageDCT
DataPath = C:\ProgramData\SageDCT
BinPath = C:\Program Files\babgvant.com\SageDCT
LogLevel = Verbose
ReplacePath = 
StartPort = 6970
RtpStartPort = 5010
DCTRegex = System.String[]
WriteBufferSize = 1024
LogAge = 10
DebugDataReceive = False
NoopGetsFirmware = False
RtpBufferSize = 131072
RewritePAT = False
AsyncStop = False
AutoResetWaitSeconds = 2
AutoReset = True
StaticTunerAssignments = True
DelayServiceStart = 0
RemoveDuplicateChannels = True
RemoveSDChannels = True
HDSuffix = HD;-DT;DT
WriteThrough = False

2011/10/08 22:46:44.52 : AcceptConnections: 6978
2011/10/08 22:46:44.52 : Port: 6978
2011/10/08 22:46:44.52 : SageDCTTuner 6978 done start
2011/10/08 22:46:44.52 : Before Accept: 6978
2011/10/08 22:46:44.54 : 6981 Channels Found: 527
2011/10/08 22:46:44.54 : Remove SD Channels
2011/10/08 22:46:44.56 : 6981 Channels Listed: 527 Channels Removed: 0
2011/10/08 22:46:44.83 : 6978 Channels Found: 527
2011/10/08 22:46:44.83 : Remove SD Channels
2011/10/08 22:46:44.86 : 6978 Channels Listed: 527 Channels Removed: 0
2011/10/08 22:46:46.14 : UPnPDevice Found: Windows Media Player Sharing ID: uuid:02596a15-3b8f-439f-b5b0-1cb022c43123
2011/10/08 22:46:46.16 : NIC: {E29AC6C2-7037-11DE-816D-806E6F6E6963} Hosting Device uuid:02596a15-3b8f-439f-b5b0-1cb022c43123 - BRENT-WINDOWS7: Brent:
2011/10/08 22:46:49.52 : After Accept: 6978
2011/10/08 22:46:49.52 : 6978 Bytes Received: 49
2011/10/08 22:46:49.53 : ProcessMessage 6978: START TunerName|189|18000000|c:\file.ts|Quality
2011/10/08 22:46:49.54 : StartRecording - 6978: Request - Channel: 189 File: c:\file.ts
2011/10/08 22:46:49.54 : No active recordings in Stop - 6978
2011/10/08 22:46:49.54 : StartRecording 6978 - WBBM HDTV(digit
2011/10/08 22:46:49.54 : 6978 Channel: 189 FilePath: c:\file.ts
2011/10/08 22:46:49.55 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:ConnectionManager Action: PrepareForConnection Refresh: False
2011/10/08 22:46:49.57 : Done ExecuteAction: PrepareForConnection
2011/10/08 22:46:49.57 : ConnectionID: 18602 AVInstanceID: 18602
2011/10/08 22:46:49.57 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: Play Refresh: False
2011/10/08 22:46:49.60 : Done ExecuteAction: Play
2011/10/08 22:46:49.60 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:CAS Action: SetChannel Refresh: False
2011/10/08 22:46:50.52 : Done ExecuteAction: SetChannel
2011/10/08 22:46:50.52 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: GetMediaInfo Refresh: False
2011/10/08 22:46:50.55 : Done ExecuteAction: GetMediaInfo
2011/10/08 22:46:50.56 : RTSP Send: DESCRIBE rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:50.56 : DESCRIBE: RTSP/1.0 200 OK

2011/10/08 22:46:50.56 : RTSP Send: SETUP rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:50.56 : RTSP Send: PLAY rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:50.57 : PLAY: RTSP/1.0 200 OK

2011/10/08 22:46:50.57 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: ProgramNumber Refresh: False
2011/10/08 22:46:50.78 : Done GetServiceVariable: ProgramNumber
2011/10/08 22:46:50.78 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: PIDList Refresh: False
2011/10/08 22:46:51.00 : Done GetServiceVariable: PIDList
2011/10/08 22:46:51.00 : ProgramNumber: 1 PIDList: 0000,0030,07C0,07C1,07C2,07C3,07C4
2011/10/08 22:46:51.00 : RTP Stop: True
2011/10/08 22:46:51.00 : RTP Start - Settings: RTP: 192.168.1.110:5014 RTCP:  File c:\file.ts - True
2011/10/08 22:46:51.00 : SageDCTTuner 6978 Send: OK
2011/10/08 22:46:51.00 : Before Accept: 6978
2011/10/08 22:46:51.01 : Start ProcessPackets
2011/10/08 22:46:52.63 : SearchComplete
2011/10/08 22:46:53.01 : ProcessPackets: No data recieved 10/8/2011 10:46:51 PM
2011/10/08 22:46:53.02 : ResetRecording - 6978
2011/10/08 22:46:53.02 : RTSP TEARDOWN - 6978
2011/10/08 22:46:53.02 : RTSP Send: TEARDOWN rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:53.02 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: GetMediaInfo Refresh: False
2011/10/08 22:46:53.05 : Done ExecuteAction: GetMediaInfo
2011/10/08 22:46:53.05 : RTSP Send: DESCRIBE rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:53.05 : RTSP/1.0 200 OK

2011/10/08 22:46:53.05 : RTSP Send: SETUP rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:53.05 : RTSP Send: PLAY rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:53.05 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: ProgramNumber Refresh: False
2011/10/08 22:46:53.26 : Done GetServiceVariable: ProgramNumber
2011/10/08 22:46:53.26 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: PIDList Refresh: False
2011/10/08 22:46:53.47 : Done GetServiceVariable: PIDList
2011/10/08 22:46:53.47 : ProgramNumber: 1 PIDList: 0000,0030,07C0,07C1,07C2,07C3,07C4
2011/10/08 22:46:53.47 : RTSP/1.0 200 OK

2011/10/08 22:46:53.47 : ResetRequired: True
2011/10/08 22:46:55.01 : ProcessPackets: No data recieved 10/8/2011 10:46:53 PM
2011/10/08 22:46:55.01 : ResetRecording - 6978
2011/10/08 22:46:55.01 : RTSP TEARDOWN - 6978
2011/10/08 22:46:55.01 : RTSP Send: TEARDOWN rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:55.02 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: GetMediaInfo Refresh: False
2011/10/08 22:46:55.05 : Done ExecuteAction: GetMediaInfo
2011/10/08 22:46:55.05 : RTSP Send: DESCRIBE rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:55.05 : RTSP/1.0 200 OK

2011/10/08 22:46:55.05 : RTSP Send: SETUP rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:55.05 : RTSP Send: PLAY rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:55.05 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: ProgramNumber Refresh: False
2011/10/08 22:46:55.26 : Done GetServiceVariable: ProgramNumber
2011/10/08 22:46:55.26 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: PIDList Refresh: False
2011/10/08 22:46:55.47 : Done GetServiceVariable: PIDList
2011/10/08 22:46:55.47 : ProgramNumber: 1 PIDList: 0000,0030,07C0,07C1,07C2,07C3,07C4
2011/10/08 22:46:55.47 : RTSP/1.0 200 OK

2011/10/08 22:46:55.47 : ResetRequired: True
2011/10/08 22:46:57.01 : ProcessPackets: No data recieved 10/8/2011 10:46:55 PM
2011/10/08 22:46:57.01 : ResetRecording - 6978
2011/10/08 22:46:57.01 : RTSP TEARDOWN - 6978
2011/10/08 22:46:57.01 : RTSP Send: TEARDOWN rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:57.02 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: GetMediaInfo Refresh: False
2011/10/08 22:46:57.05 : Done ExecuteAction: GetMediaInfo
2011/10/08 22:46:57.05 : RTSP Send: DESCRIBE rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:57.05 : RTSP/1.0 200 OK

2011/10/08 22:46:57.05 : RTSP Send: SETUP rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:57.05 : RTSP Send: PLAY rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:57.05 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: ProgramNumber Refresh: False
2011/10/08 22:46:57.08 : After Accept: 6978
2011/10/08 22:46:57.08 : 6978 Bytes Received: 6
2011/10/08 22:46:57.08 : ProcessMessage 6978: STOP
2011/10/08 22:46:57.27 : Done GetServiceVariable: ProgramNumber
2011/10/08 22:46:57.27 : GetServiceVariable - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:opencable-com:serviceId:urn:schemas-opencable-com:service:Mux Variable: PIDList Refresh: False
2011/10/08 22:46:57.48 : Done GetServiceVariable: PIDList
2011/10/08 22:46:57.48 : ProgramNumber: 1 PIDList: 0000,0030,07C0,07C1,07C2,07C3,07C4
2011/10/08 22:46:57.48 : RTSP/1.0 200 OK

2011/10/08 22:46:57.48 : ResetRequired: True
2011/10/08 22:46:57.48 : Stop active recording: 6978
2011/10/08 22:46:57.48 : UPnP stop: 6978
2011/10/08 22:46:57.48 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:AVTransport Action: Stop Refresh: False
2011/10/08 22:46:57.51 : Done ExecuteAction: Stop
2011/10/08 22:46:57.51 : ExecuteAction - Device: HDHomeRun Prime Tuner 1310989B-1 Service: urn:upnp-org:serviceId:urn:schemas-upnp-org:service:ConnectionManager Action: ConnectionComplete Refresh: False
2011/10/08 22:46:57.52 : Done ExecuteAction: ConnectionComplete
2011/10/08 22:46:57.52 : RTSP TEARDOWN - 6978
2011/10/08 22:46:57.52 : RTSP Send: TEARDOWN rtsp://192.168.1.112:554/tuner1/current RTSP/1.0
2011/10/08 22:46:57.53 : RTP Stop: False
2011/10/08 22:46:57.53 : Leave ProcessPackets
2011/10/08 22:46:57.53 : SageDCTTuner 6978 Send: OK
2011/10/08 22:46:57.53 : Before Accept: 6978
Reply With Quote
  #274  
Old 10-09-2011, 09:04 AM
Gustovier Gustovier is offline
Sage Aficionado
  
Join Date: Nov 2010
Location: Chicago
Posts: 460
So another firmware was released last night 20111008beta1 so i figured I would give that a try since nothing else was working. Still no good. I see that sagedct is sending the rtp commands correctly and getting back good responses (version, size, etc..) but when it comes to setting up playback there are some issues. It gets the tuner to to tune to the correct channel, but it's like it's not correctly accepting the playback stream. It works when using media player or quicktv to view the stream.
Reply With Quote
  #275  
Old 10-09-2011, 01:36 PM
phelme's Avatar
phelme phelme is offline
Sage Icon
  
Join Date: Dec 2006
Posts: 1,151
Have you tried the test mode within SageDCT to see if it is communicating with the Prime (VERSION, START, STOP, etc.)?

I'm running SageDCT 2.0 and it works fine. Haven't upgraded my SD software though lately.
__________________
Server: AMD 9600 Phenom on XP, Gigabyte GA-MA78GPM, 2GB RAM, 320+250+500 GB SATA drives, HDHomeRun Prime, HD-PVR x.5.1, Paterson serial
Client/Encoder:AMD 3800+ X2, 512 MB RAM, ATI X1650 XT, nMediaPC case, Hauppauge HD-PVR, Cyberlink/ArcSoft decoders, USB-UIRT
Client/Encoder: AMD 3800+ X2, 512 MB RAM, 6150 graphics, nMediaPC case, ArcSoft decoders
Client: HD300, Asus Pundit P1-AH1, AMD 3800+ X2 CPU, 1 GB RAM, 6150 graphics, ArcSoft decoders
Backup: Synology
SageTV version: FINAL
Reply With Quote
  #276  
Old 10-09-2011, 01:55 PM
Gustovier Gustovier is offline
Sage Aficionado
  
Join Date: Nov 2010
Location: Chicago
Posts: 460
Yup, like I said in my first post almost everything works except sagedct isn't saving/receiving the stream properly. Im pretty sure the prime must have changed something in how it sends the stream or something and sagedct isn't prepared for it. All the other commands work such as version, size,etc. Andy will have to step in here. Andy is it also possible for you to publish the source code of sagedct, I'm afraid if for some reason that u lord forbid were unable to work on this in the future we would have to start from scratch to recreate this functionality.

Quote:
Originally Posted by phelme View Post
Have you tried the test mode within SageDCT to see if it is communicating with the Prime (VERSION, START, STOP, etc.)?

I'm running SageDCT 2.0 and it works fine. Haven't upgraded my SD software though lately.
Reply With Quote
  #277  
Old 10-09-2011, 02:11 PM
phelme's Avatar
phelme phelme is offline
Sage Icon
  
Join Date: Dec 2006
Posts: 1,151
Quote:
Originally Posted by Gustovier View Post
Yup, like I said in my first post almost everything works except sagedct isn't saving/receiving the stream properly. Im pretty sure the prime must have changed something in how it sends the stream or something and sagedct isn't prepared for it. All the other commands work such as version, size,etc. Andy will have to step in here. Andy is it also possible for you to publish the source code of sagedct, I'm afraid if for some reason that u lord forbid were unable to work on this in the future we would have to start from scratch to recreate this functionality.
Have you bounced the Windows firewall since installing the new software? Have the ports in use changed?

I can't find a changelog for what SD has done this week. You might want to make a post on their boards so they can get involved and track your Prime's log activity.
__________________
Server: AMD 9600 Phenom on XP, Gigabyte GA-MA78GPM, 2GB RAM, 320+250+500 GB SATA drives, HDHomeRun Prime, HD-PVR x.5.1, Paterson serial
Client/Encoder:AMD 3800+ X2, 512 MB RAM, ATI X1650 XT, nMediaPC case, Hauppauge HD-PVR, Cyberlink/ArcSoft decoders, USB-UIRT
Client/Encoder: AMD 3800+ X2, 512 MB RAM, 6150 graphics, nMediaPC case, ArcSoft decoders
Client: HD300, Asus Pundit P1-AH1, AMD 3800+ X2 CPU, 1 GB RAM, 6150 graphics, ArcSoft decoders
Backup: Synology
SageTV version: FINAL
Last edited by phelme; 10-09-2011 at 02:13 PM.
Reply With Quote
  #278  
Old 10-09-2011, 02:20 PM
Gustovier Gustovier is offline
Sage Aficionado
  
Join Date: Nov 2010
Location: Chicago
Posts: 460
I've had windows fw disabled since the beginning. I figure it can't be the fw since all other commands are working except thencapturing of the video stream. I'm not sure how SD is gonna be able to help since all this is unsupported. Something has changed though on their end. We might need Andy to weigh in.
Reply With Quote
  #279  
Old 10-09-2011, 02:43 PM
phelme's Avatar
phelme phelme is offline
Sage Icon
  
Join Date: Dec 2006
Posts: 1,151
Quote:
Originally Posted by Gustovier View Post
I've had windows fw disabled since the beginning. I figure it can't be the fw since all other commands are working except thencapturing of the video stream. I'm not sure how SD is gonna be able to help since all this is unsupported. Something has changed though on their end. We might need Andy to weigh in.
Interesting. My setup simply will not work with Sage unless I enable the firewall. But I am on XP.
__________________
Server: AMD 9600 Phenom on XP, Gigabyte GA-MA78GPM, 2GB RAM, 320+250+500 GB SATA drives, HDHomeRun Prime, HD-PVR x.5.1, Paterson serial
Client/Encoder:AMD 3800+ X2, 512 MB RAM, ATI X1650 XT, nMediaPC case, Hauppauge HD-PVR, Cyberlink/ArcSoft decoders, USB-UIRT
Client/Encoder: AMD 3800+ X2, 512 MB RAM, 6150 graphics, nMediaPC case, ArcSoft decoders
Client: HD300, Asus Pundit P1-AH1, AMD 3800+ X2 CPU, 1 GB RAM, 6150 graphics, ArcSoft decoders
Backup: Synology
SageTV version: FINAL
Reply With Quote
  #280  
Old 10-09-2011, 05:38 PM
Gustovier Gustovier is offline
Sage Aficionado
  
Join Date: Nov 2010
Location: Chicago
Posts: 460
Arggg!!! This is ability to not downgrade is dumb. Damn cable labs!! I even went and switched a prime for another one. Even though you have the same cable card you still will have to reactivate it which is dumb yet again. Then of course as soon as I started up the hdhomerun configuration app it automatically upgraded the firmware so I'm right back where I started plus now have to reactivate the cable card. Only Andy I think can fix this through a software change on his end (hopefully it doesn't have to be on SD's end)
Reply With Quote
Reply
Page 14 of 108 « First 41213 14 15162464 Last »

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
HDHomeRun PRIME CableCARD does work with premium channels Homebuilder Hardware Support 1 05-17-2011 08:08 AM
HDHR Prime Available For Pre-Order on Amazon, $207.20 USD (or not) mayamaniac General Discussion 20 05-14-2011 04:15 PM
Let's add support for the new silcon dust HDHR Prime (copy freely channels) Gustovier Hardware Support 30 05-05-2011 08:32 AM
HDHomerun Prime? cenwesi Hardware Support 26 04-19-2011 05:40 PM
HDHomeRun Prime with CableCARD might work with MythTV after all KJake The SageTV Community 4 07-22-2010 09:10 AM


All times are GMT -6. The time now is 08:27 PM.

Contact Us - SageTV, LLC - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.