![]() |
|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
![]() |
|
Thread Tools | Search this Thread | Display Modes |
#41
|
||||
|
||||
Quote:
![]() Something kind of cool about the IPTV encoders is that you can have multiple computers connected to the http URL at the same time and it will stream to all of them. This is nice when you just want to verify things without just hoping that you see it when SageTV is done tuning in. VLC works really well for this purpose. Eventually I'm going to add some kind of way to tell OpenDCT that two capture devices actually have the same source and have a way to tell it what channels to tune on what device. That way you always get the best possible picture.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache). Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI. Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom). Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG |
#42
|
||||
|
||||
Quote:
![]()
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache). Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI. Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom). Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG |
#43
|
||||
|
||||
Well ... at least your still in one piece after the Craigslist transaction.
|
#44
|
||||
|
||||
The exchange was in a Wendy's parking lot near a highway; plenty of witnesses. The reason it was so cheap was because it doesn't last more than a few hours of actual gameplay. Fortunately that's not what I was buying it for.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache). Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI. Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom). Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG |
#45
|
|||
|
|||
You're welcome. I'm hoping this setup works reliably since it would save me a box rental fee.
|
#46
|
|||
|
|||
Just got my device thought for a second I had to learn Chinese. The web page came up in Chinese. had to figure what to click on to get in English.
![]() ![]() ![]() ![]() Edit Do I have a headache!!! this is what my property looks like. I cannot get the tuner plugin to be recognized. sagetv.device.-782839283.channel_padding=0 sagetv.device.-782839283.consumer=opendct.consumer.DynamicConsumerImpl sagetv.device.-782839283.custom_channels= sagetv.device.-782839283.delay_to_wait_after_tuning=0 sagetv.device.-782839283.device_name=Encoder 1 sagetv.device.-782839283.encoder_listen_port=9000 sagetv.device.-782839283.encoder_merit=0 sagetv.device.-782839283.encoder_pool=generic_http sagetv.device.-782839283.exclusive_server_address= sagetv.device.-782839283.fast_network_encoder_switch=true sagetv.device.-782839283.last_channel=-1 sagetv.device.-782839283.pretuning_executable= sagetv.device.-782839283.stopping_executable=PowerShell.exe -Command Invoke-WebRequest -Uri http\://10.0.0.23\:40510/button-stop sagetv.device.-782839283.streaming_url=http\://10.0.0.23/hdmi sagetv.device.-782839283.streaming_url2= sagetv.device.-782839283.streaming_url2_channels= sagetv.device.-782839283.transcode_profile= sagetv.device.-782839283.tuning_delay_ms=0 sagetv.device.-782839283.tuning_executable=PowerShell.exe -Command Invoke-WebRequest -Uri http\://10.0.0.23\:40510/tune%20%c%
__________________
Channels DVR UBUNTU Server 2 Primes 3 Connects TVE SageTV Docker with input from Channels DVR XMLTV and M3U VIA Opendct. Last edited by nyplayer; 05-23-2016 at 03:05 PM. |
#47
|
|||
|
|||
Even though I have not setup the tuning to work I still should be able to preview it on sagetv.
logs attached.
__________________
Channels DVR UBUNTU Server 2 Primes 3 Connects TVE SageTV Docker with input from Channels DVR XMLTV and M3U VIA Opendct. |
#48
|
||||
|
||||
The IP address of the HDMI capture device is going to be different from the IP address of the computer with WMC installed on it.
From what I'm seeing in your logging, it looks like you have the HDMI encoder address correct, but the IP address of the WMC computer wrong.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache). Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI. Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom). Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG |
#49
|
||||
|
||||
I got my DMA2200 today. The power consumption is great. 10 watts idle and 12 watts during HD playback. Also it defaults to powered on when plugged in.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache). Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI. Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom). Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG |
#50
|
|||
|
|||
Quote:
![]() ![]()
__________________
Channels DVR UBUNTU Server 2 Primes 3 Connects TVE SageTV Docker with input from Channels DVR XMLTV and M3U VIA Opendct. |
#51
|
||||
|
||||
If you change the IP address for the PowerShell command and it's still not working, you might need to change the account that the OpenDCT service is running under to an account that has network access. Or as an alternative if you can get a copy of wget.exe or curl.exe, those would work too without needing Internet Explorer to be functional. (It's such a strange requirement) I just chose PowerShell because anyone will likely already have it.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache). Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI. Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom). Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG |
#52
|
||||
|
||||
I did some more testing on my HD200 now that I have an encoder that can do 1080p60 and I noticed that it seems to have a really hard time keeping up. The HD300 and the Windows Client don't have any issues that I noticed. I had to bump it down to 1080p30 so the A/V sync wasn't off. The bitrate didn't seem to make any difference. I'm not sure if this is already a known limitation.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache). Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI. Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom). Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG |
#53
|
|||
|
|||
Channel change is working great I can preview in the device web browser and see the channel change ... but I am getting no signal in SageTV. Preview in unit webrowser has a great picture and sound.
It also plays in vlc .... http://10.0.0.168/0.ts
__________________
Channels DVR UBUNTU Server 2 Primes 3 Connects TVE SageTV Docker with input from Channels DVR XMLTV and M3U VIA Opendct. Last edited by nyplayer; 05-23-2016 at 05:16 PM. |
#54
|
||||
|
||||
Quote:
Also since remuxing isn't really needed, I would change DynamicConsumerImpl to RawSageTVConsumerImpl. The channels will come in a little faster.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache). Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI. Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom). Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG |
#55
|
|||
|
|||
Quote:
Once again everything plays fine in VLC.
__________________
Channels DVR UBUNTU Server 2 Primes 3 Connects TVE SageTV Docker with input from Channels DVR XMLTV and M3U VIA Opendct. |
#56
|
||||
|
||||
Quote:
Code:
wget -O - http://<WMC_address>:40510/tune%20%c% If you have cranked the bitrate all the way up, try dropping it down for now just in case your hard drive is having a hard time keeping up. Also what are you playing the video on? HD300, HD200 or Windows Client? If you're using the Android miniclient, you may need to use a much lower bitrate unfortunately.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache). Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI. Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom). Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG Last edited by EnterNoEscape; 05-23-2016 at 05:56 PM. |
#57
|
|||
|
|||
It is only set to 1800 ... encoded size same as input.
__________________
Channels DVR UBUNTU Server 2 Primes 3 Connects TVE SageTV Docker with input from Channels DVR XMLTV and M3U VIA Opendct. |
#58
|
||||
|
||||
Try dropping the frame-rate to 30. I recently discovered that the HD200 can't do 1080p60.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache). Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI. Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom). Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG |
#59
|
|||
|
|||
Ok this is really weird it works on my shield plays perfectly ... but it plays in slow motion on my PC only in SageTV.
__________________
Channels DVR UBUNTU Server 2 Primes 3 Connects TVE SageTV Docker with input from Channels DVR XMLTV and M3U VIA Opendct. |
#60
|
||||
|
||||
Did you check your CPU usage? Maybe the codec you're using doesn't work well with the H.264 that's being encoded.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache). Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI. Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom). Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG |
![]() |
Tags |
tuner setup, tuning, windows media center, wmc |
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tuner Priority w/Live TV | will | SageTV Software | 12 | 03-04-2018 03:25 PM |
Live TV with 2 extenders, 1 tuner | dibs | SageTV Software | 3 | 03-07-2009 02:37 PM |
Reserve a Tuner for Live TV | mbowling | SageTV Software | 3 | 11-10-2008 08:36 AM |
Switching tuner on live tv | appelm | SageTV Software | 1 | 02-06-2006 01:38 PM |
Can a tuner be dedicated to live TV? | GTwannabe | General Discussion | 2 | 01-09-2005 12:44 AM |