SageTV Community

SageTV Community (http://forums.sagetv.com/forums/index.php)
-   Hardware Support (http://forums.sagetv.com/forums/forumdisplay.php?f=9)
-   -   PVR-250 not working w/ coax input but fine w/ s-video (http://forums.sagetv.com/forums/showthread.php?t=29752)

tdalton 01-07-2008 12:15 PM

PVR-250 not working w/ coax input but fine w/ s-video
 
Hi, I've had a dual tuner setup for sometime with DirecTV and serial control. Recently I went to cable and decided just to use analog cable now with no STB straight into the coax ports of my PVR-150 and PVR-250. The coax input works fine on the 150 but it is not working on the 250. I swapped the coax cable to make sure it was good, moved the PVR-250 from one slot to another and I am also using the latest drivers for the 250. The S-video port works fine on the 250 and Hauppauge support said that usually if one input works the others do too. Has anyone ever had a problem like this before and if so was it the card or something else? Any input would be greatly appreciated. Thanks.

carlgar 01-07-2008 01:22 PM

I had a PVR-350 that had the coax input go bad, it gave me a very poor image. The S-video port worked fine. Hauppauge replaced the card.

tdalton 01-13-2008 10:00 PM

I gave up and got a 1600. Now I am able to record two analog shows at one time w/ the 150 and the 1600. But I have another problem now and am extremely disappointed that QAM doesn't work and no one seems to know why.


All times are GMT -6. The time now is 02:47 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.