SageTV Community

SageTV Community (http://forums.sagetv.com/forums/index.php)
-   Hardware Support (http://forums.sagetv.com/forums/forumdisplay.php?f=9)
-   -   Hello upgraded to SageTV 9.2.1 ... both USB-UIRTs stopped changing channels after the (http://forums.sagetv.com/forums/showthread.php?t=65946)

perfessor101 04-10-2019 08:46 AM

Hello upgraded to SageTV 9.2.1 ... both USB-UIRTs stopped changing channels after the
 
Hello,
I upgraded to SageTV 9.2.1 yesterday morning ... both USB-UIRTs stopped changing channels after the upgrade.
All recordings on all the wrong channels yesterday

I'll try restoring yesterdays backup with SageTV 9.1.9.778 and then use those wiz.bin files too

I would like to upgrade later, but I'm not sure where to start the troubleshooting if all recordings are / were wrong.

tried recording eight shows this morning ... no channel changes attempted ...



Thanks for your time,
Bobby

perfessor101 04-10-2019 10:32 AM

this should be the sagetv_0.txt file from last night ...
 
1 Attachment(s)
Hello
Here's a zipped log of last nights attempted recordings ... windows restarted my system around 3:40 am today ...

Bobby

KryptoNyte 04-10-2019 11:15 AM

Just to clarify, you upgraded an older version of SageTV installation to version 9.2.1 32 bit?

perfessor101 04-10-2019 11:31 AM

Sorry every one
 
Hello

looks like I got the 64 bit version ...

I'm so used to automatically downloading 64 bit versions of software I got the wrong one ... my bad, I Apologize

forgot I was on the 32 bit version of SageTV on Windows 7 64 bit ...

I'll install the 32bit version tomorrow ... and test it before I leave it alone ...

Thank you KryptoNyte

I'll post the startup sagetv_0.txt file from yesterday morning if that helps anyone with future debugging.

SageTV kept reporting it couldn't find COM0 when trying to tune recordings

Thank you for your time and help,
Bobby

perfessor101 04-10-2019 11:34 AM

is there a way to change the title of this post ?
 
Is there a way to change the title of this post ?

to [Solved, my mistake, please look away]

perfessor101 04-10-2019 11:38 AM

and looks like it's related to this
 
https://forums.sagetv.com/forums/showthread.php?t=65940

KryptoNyte 04-10-2019 04:10 PM

I seem to recall mention in the latest 64 bit installer that it asks you during the installation if you want to include support for the USB-UIRT. I would recommend sticking with the 64 bit version if you can get it to work, maybe uninstall and then reinstall with the support for USB-UIRT. I assume that you'll still need to completely configure your tuners and USB-UIRT tuning after the install.

Probably better read up on this, because you'll likely want to migrate your wiz.bin file also so 64 bit Sage already knows your watched shows and such. I do know that if you have both installed, to make sure that they never run at the same time, including the service autostart if you use that.

KryptoNyte 04-10-2019 04:12 PM

Read here;

https://forums.sagetv.com/forums/showthread.php?t=63009

shill 04-15-2019 11:43 AM

I updated to 9.2.1 but chose to stick with 32-bit for now since I'm planning on overhauling my entire set up over the summer, so I didn't think the USB-UIRT thing would be a problem.

I'm unable to change channels since the update, and I've tried with the original uuirtdrv.dll, the original uuirtdrv.dll + the uu_irsage.dll, and the 64-bit uuirtdrv.dll + the uu_irsage.dll, and have the same problem in all cases - no channel changing.

And when I look at my video sources, it shows the path (in x86) to uu_irsage.dll in the list (based on the original config) but when I try to "Change Tuning Device" the list is empty.

valnar 04-20-2019 10:49 AM

I have the same problem. I forget which 9.x I came from, but the newest 9.2.1 will not change channels anymore on my IR.

I'm going to restore from a backup. Does anyone have the older installers tucked away anywhere?

jusjoken 04-20-2019 08:16 PM

Quote:

Originally Posted by valnar (Post 620682)
I have the same problem. I forget which 9.x I came from, but the newest 9.2.1 will not change channels anymore on my IR.

I'm going to restore from a backup. Does anyone have the older installers tucked away anywhere?

The previous release can be found on the files tab here...

https://bintray.com/opensagetv/saget...Windows/9.1.10

k


All times are GMT -6. The time now is 06:08 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.