SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support

Notices

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-19-2005, 10:43 PM
Opus4's Avatar
Opus4 Opus4 is offline
Administrator
 
Join Date: Sep 2003
Location: NJ
Posts: 19,590
Hauppauge Tweak Tool

Amontillado has created an interesting Hauppauge Tweak Tool. Some comments from that site:

Quote:
With the Hauppauge Tweak Tool several advanced settings can be changed that are not accesible with the normal software.

There are four sections:
  • "Wintv2k" contains settings for wintv2k (the hauppauge software). These settings can apply to several models

  • "250/350" contains settings specifically for the pvr 250 and 350 cards. Some of the settings only affect wintv2k, but most affect some third party software as well.

  • "150/500" contains settings specifically for the pvr 150 and 500 cards. Some of the settings only affect wintv2k, but most affect some third party software as well.

  • "150/500 advanced" contains more 150/500 setting, advanced settings as temporal/spatial filtering (Motion blur) can be found here. Some of the settings only affect wintv2k, but most affect some third party software as well.
- Andy
__________________
SageTV Open Source v9 is available.
- Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1.
- Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus
- HD Extenders: A) FAQs B) URC MX-700 remote setup
Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request.
Reply With Quote
  #2  
Old 03-27-2005, 05:31 PM
Methius's Avatar
Methius Methius is offline
Sage Advanced User
 
Join Date: Oct 2004
Posts: 124
Lightbulb Tweak Tool for Pvr-x50 & 500

Don't know if you guys know about this one, (Big thanks to amontillado for his work on this) but this little tool is my savior. Thought you should all know about it.

Download it

Quote from Htpcnews.com:
As with anything, use this tool at your own risk. As you can tell by the screenshot there is a whole host of things you can enhance... or screw up.


Wintv2k" contains settings for wintv2k (the hauppauge software). These settings can apply to several models
"250/350" contains settings specifically for the pvr 250 and 350 cards. Some of the settings only affect wintv2k, but most affect some third party software as well.
"150/500" contains settings specifically for the pvr 150 and 500 cards. Some of the settings only affect wintv2k, but most affect some third party software as well.
"150/500 advanced" contains more 150/500 setting, advanced settings as temporal/spatial filtering (Motion blur) can be found here. Some of the settings only affect wintv2k, but most affect some third party software as well.


Reply With Quote
  #3  
Old 03-27-2005, 06:05 PM
Opus4's Avatar
Opus4 Opus4 is offline
Administrator
 
Join Date: Sep 2003
Location: NJ
Posts: 19,590
Yup... this thread has been linked in the Hardware related utilities and customizations index sticky for a little over a week now... so I merged them

- Andy
__________________
SageTV Open Source v9 is available.
- Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1.
- Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus
- HD Extenders: A) FAQs B) URC MX-700 remote setup
Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request.
Reply With Quote
  #4  
Old 03-27-2005, 06:44 PM
Jere_Jones's Avatar
Jere_Jones Jere_Jones is offline
Sage Fanatic
 
Join Date: Apr 2004
Location: Jacksonville, FL
Posts: 993
I find it interesting that I didn't take note of until there was a screenshot. THEN I investigated it and found it worthy.

Thanks, Methius, for (re)bringing it to our(my) attention.

Jere
__________________
Death to commercials!!!
Latest ShowAnalyzer Beta version: 0.9.7
Reply With Quote
  #5  
Old 11-18-2005, 08:52 AM
steingra steingra is offline
Sage Aficionado
 
Join Date: Oct 2005
Posts: 427
Send a message via MSN to steingra
What about settings for the Hauppauge USB2 PVR? Anyway to tweak those? I am thinking this tool might allow me to increase volume, some of my recordings (I havent pinpointed if its recordings from the 150 or the PVR USB2) seem to have low volume levels. I mean you can still hear it, but you have to crank up volume at least 25 -50% louder than other apps/games/etc.
Reply With Quote
  #6  
Old 11-18-2005, 01:02 PM
briands briands is offline
Sage Icon
 
Join Date: Aug 2004
Location: Bloomington, IN
Posts: 1,093
If you have more than one of the same card, do these setting automatically affect all of them or do you somehow have to force the change for each card?
Reply With Quote
  #7  
Old 08-18-2010, 06:41 PM
valnar valnar is offline
Sage Icon
 
Join Date: Oct 2003
Posts: 1,205
Send a message via ICQ to valnar
He he. Just reformatted my PC and I no longer have this. Anybody have the PVR-250 tweak tool?
__________________
Server: ASUS P7F-E, Intel Xeon x3440, 4GB RAM, DR-400-6 RM case, 2x Addonics Disk Array 3SA, 7TB disk,
2x Nvidia DualTV, 2x HDHomeRun, HD-PVR 1212, Win7-32bit, Sage 7 latest
Client 1: HD300 on Panasonic Plasma TC-P50ST60
Client 2: HD300 on Vizio 40"
Others: Sage Client & Placeshifter
Reply With Quote
  #8  
Old 08-18-2010, 06:48 PM
nyplayer nyplayer is offline
SageTVaholic
 
Join Date: Sep 2005
Posts: 3,914
you could try looking here shspvr
__________________
Windows 10 I3 Dual Core 3.0 Server, SageTV9... OpenDCT with 2 HDHRPrimes and 4 HDHRconnects for a total of 14 Tuners.
Reply With Quote
  #9  
Old 08-18-2010, 06:58 PM
valnar valnar is offline
Sage Icon
 
Join Date: Oct 2003
Posts: 1,205
Send a message via ICQ to valnar
Yah, the original link is no longer there. He links to the original link.
__________________
Server: ASUS P7F-E, Intel Xeon x3440, 4GB RAM, DR-400-6 RM case, 2x Addonics Disk Array 3SA, 7TB disk,
2x Nvidia DualTV, 2x HDHomeRun, HD-PVR 1212, Win7-32bit, Sage 7 latest
Client 1: HD300 on Panasonic Plasma TC-P50ST60
Client 2: HD300 on Vizio 40"
Others: Sage Client & Placeshifter
Reply With Quote
  #10  
Old 08-18-2010, 07:06 PM
nyplayer nyplayer is offline
SageTVaholic
 
Join Date: Sep 2005
Posts: 3,914
Here you go.

http://web.archive.org/web/200611081...ge_tweaker.zip
__________________
Windows 10 I3 Dual Core 3.0 Server, SageTV9... OpenDCT with 2 HDHRPrimes and 4 HDHRconnects for a total of 14 Tuners.
Reply With Quote
  #11  
Old 08-19-2010, 05:06 AM
valnar valnar is offline
Sage Icon
 
Join Date: Oct 2003
Posts: 1,205
Send a message via ICQ to valnar
Thank you.
__________________
Server: ASUS P7F-E, Intel Xeon x3440, 4GB RAM, DR-400-6 RM case, 2x Addonics Disk Array 3SA, 7TB disk,
2x Nvidia DualTV, 2x HDHomeRun, HD-PVR 1212, Win7-32bit, Sage 7 latest
Client 1: HD300 on Panasonic Plasma TC-P50ST60
Client 2: HD300 on Vizio 40"
Others: Sage Client & Placeshifter
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:35 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.