SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support

Notices

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

Reply
 
Thread Tools Search this Thread Display Modes
  #1221  
Old 09-09-2016, 11:27 AM
HokiePerogi HokiePerogi is offline
Sage Advanced User
 
Join Date: Oct 2008
Posts: 187
Quote:
Originally Posted by tmiranda View Post
I have an HDHR Prime (using OpenDCT to tune) and and old original HDHR. I was using native tuning for the old HDHR but want to use OpenDCT. I removed the old HDHR as an input source but when I try to add it there is no option to do so as an OpenDCT tuner.

What do I need to do to have OpenDCT see the old HDHR?

Have you checked the opendct.properties file to see if the both of your HDHR's are listed as discovered devices in it?

If they are both in there, then you might need to stop SageTV and update sage.properties to reflect:

Code:
network_encoder_discovery=true
__________________
Server: AMD Phenom II X6 3.20 GHz ♠ 16 GB RAM (15.7 usable)
Capture: HDHomeRun PRIME ♠ Ceton InfiniTV 4 PCIe (Clear-QAM only)
Tuning: OpenDCT v0.5.20-RC2
Software: Windows 7 Ultimate 64-bit ♠ SageTV v9.0.12.504 ♠ Java 1.8.0_111
Clients: 4 x STX-HD300 ♠ 3 x STX-HD200 ♠ MacOS Placeshifter
Reply With Quote
  #1222  
Old 09-09-2016, 05:01 PM
Zogg Zogg is offline
Sage Advanced User
 
Join Date: May 2011
Location: Frisco, TX
Posts: 146
I see that if I stop watching live TV and return to the menus, the HDHR is not released. I'm looking at one of my Prime channels still sending even though I stopped watching 15 minutes ago.

Is there a timeout value that can be shortened, or did I miss a setting?

ALSO, as I'm testing things out I only have 1 HDHR Prime tuner and 1 original HDHR tuner set up for use by Sage. I configured both in OpenDCT, and gave the original HDHR tuner a higher priority.

I selected a channel to watch in the guide that is a clear QAM channel, and while it's displaying fine, both tuners were set to that channel and both are sending according to the HDHomeRun Config GUI program. Surely this isn't normal behavior to run two tuners simultaneously.

Okay, when I stopped playback, the original HDHR stopped properly but the Prime tuner is still programmed and sending, just like I described above regarding the timeout value. Something must be wrong with that tuner's setup.

Last edited by Zogg; 09-09-2016 at 05:15 PM.
Reply With Quote
  #1223  
Old 09-09-2016, 06:04 PM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,535
Quote:
Originally Posted by Zogg View Post
I see that if I stop watching live TV and return to the menus, the HDHR is not released. I'm looking at one of my Prime channels still sending even though I stopped watching 15 minutes ago.

Is there a timeout value that can be shortened, or did I miss a setting?

ALSO, as I'm testing things out I only have 1 HDHR Prime tuner and 1 original HDHR tuner set up for use by Sage. I configured both in OpenDCT, and gave the original HDHR tuner a higher priority.

I selected a channel to watch in the guide that is a clear QAM channel, and while it's displaying fine, both tuners were set to that channel and both are sending according to the HDHomeRun Config GUI program. Surely this isn't normal behavior to run two tuners simultaneously.

Okay, when I stopped playback, the original HDHR stopped properly but the Prime tuner is still programmed and sending, just like I described above regarding the timeout value. Something must be wrong with that tuner's setup.
The HDHomeRun Prime might be tuned, but it shouldn't be locked or prevent future use. The tuning might be from looking up the channel for the older device. I double-checked the code that checks for that and it doesn't issue a stop, but there's a reason for that. Since it doesn't lock the device while it does the lookup, it's possible something else might want to tune and OpenDCT would end up hosing that devices tuning attempt. The HDHomeRun will drop the tuning attempt after some time because it's not actually streaming.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #1224  
Old 09-10-2016, 09:03 AM
tmiranda's Avatar
tmiranda tmiranda is offline
SageTVaholic
 
Join Date: Jul 2005
Location: Central Florida, USA
Posts: 5,835
Quote:
Originally Posted by EnterNoEscape View Post
That's odd. The latest stable or beta should have that kind of discovery already enabled. Set the following properties are to these values in opendct.properties:

hdhr.discoverer_enabled=true
hdhr.ignore_device_ids=
hdhr.ignore_models=
sagetv.device.global.ignore_devices_csv=
sagetv.device.global.only_devices_csv=

You should also see the old HDHomeRun listed in opendct.properties.
I checked and I think the properties files is OK. I also made sure I am on the latest beta. Still can't see my original HDHR. Here is the contents of the properties file:

Code:
#OpenDCT Configuration File
#Sat Sep 10 10:52:21 EDT 2016
channels.prime.enable_all_channels=true
channels.prime.ignore_channels_csv=
channels.prime.ignore_names_containing_csv=Target Ads,VZ_URL_SOURCE,VZ_EPG_SOURCE
channels.prime.remove_duplicate_channels=true
channels.qam.automap_reference_lookup=true
channels.qam.automap_tuning_lookup=true
channels.update=true
consumer.ffmpeg.circular_buffer_size=7864320
consumer.ffmpeg.enhanced_logging=true
consumer.ffmpeg.fix_stream=true
consumer.ffmpeg.h264_pts_hack=false
consumer.ffmpeg.limit_logging=true
consumer.ffmpeg.linux_logging=true
consumer.ffmpeg.log_stream_details_for_all_programs=false
consumer.ffmpeg.max_analyze_duration=5000000
consumer.ffmpeg.min_analyze_duration=165440
consumer.ffmpeg.min_direct_flush_size=-1
consumer.ffmpeg.min_probe_size=165440
consumer.ffmpeg.min_upload_id_transfer_size=262144
consumer.ffmpeg.rw_buffer_size=262144
consumer.ffmpeg.thread_priority=8
consumer.ffmpeg.thread_rename_logging=false
consumer.ffmpeg.transcode_limit=2
consumer.ffmpeg.upload_id_enabled=false
consumer.ffmpeg.upload_id_port=7818
discovery.devices.exp_always_enable=true
discovery.devices_permitted=
discovery.exp_enabled=true
hdhr.allow_http_tuning=true
hdhr.allow_qam_http_tuning=true
hdhr.always_tune_legacy=false
hdhr.broadcast_port=64998
hdhr.broadcast_s=58
hdhr.discoverer_enabled=true
hdhr.exp_ignore_models=
hdhr.extend_transcode_profile=
hdhr.ignore_device_ids=
hdhr.locking=true
hdhr.offline_detection_min_bytes=10528
hdhr.retry_count=2
hdhr.smart_broadcast=true
hdhr.wait_for_offline_detection_s=8
hdhr.wait_for_streaming=15000
http.new.default_producer_impl=opendct.producer.HTTPProducerImpl
log.min_free_space=1073741824
log.remove_after_days=30
pm.enabled=true
pm.network.resume_timeout_ms=120000
pm.network.start_retry=120
pool.enabled=false
producer.http.std.thread_priority=9
producer.nio.udp_receive_buffer=13280
producer.rtp.nio.internal_udp_receive_buffer=1500
producer.rtp.nio.native_udp_receive_buffer=5312000
producer.rtp.nio.stalled_timeout_s=6
producer.rtp.nio.thread_priority=9
rtp.new.default_producer_impl=opendct.producer.NIORTPProducerImpl
rtsp.new.default_impl=opendct.video.rtsp.DCTRTSPClientImpl
rtsp.port_high=8500
rtsp.port_low=8300
sagetv.device.-1440111959.always_force_external_unlock=false
sagetv.device.-1440111959.consumer=opendct.consumer.FFmpegTransSageTVConsumerImpl
sagetv.device.-1440111959.delay_to_wait_after_tuning=0
sagetv.device.-1440111959.device_name=DCT-HDHomeRun Prime Tuner 131276A4-2
sagetv.device.-1440111959.encoder_listen_port=9000
sagetv.device.-1440111959.encoder_merit=0
sagetv.device.-1440111959.encoder_pool=dct
sagetv.device.-1440111959.exclusive_server_address=
sagetv.device.-1440111959.fast_network_encoder_switch=true
sagetv.device.-1440111959.last_channel=749
sagetv.device.-1440111959.transcode_profile=
sagetv.device.-1440111960.always_force_external_unlock=false
sagetv.device.-1440111960.consumer=opendct.consumer.FFmpegTransSageTVConsumerImpl
sagetv.device.-1440111960.delay_to_wait_after_tuning=0
sagetv.device.-1440111960.device_name=DCT-HDHomeRun Prime Tuner 131276A4-1
sagetv.device.-1440111960.encoder_listen_port=9000
sagetv.device.-1440111960.encoder_merit=0
sagetv.device.-1440111960.encoder_pool=dct
sagetv.device.-1440111960.exclusive_server_address=
sagetv.device.-1440111960.fast_network_encoder_switch=true
sagetv.device.-1440111960.last_channel=742
sagetv.device.-1440111960.transcode_profile=
sagetv.device.-1440111961.always_force_external_unlock=false
sagetv.device.-1440111961.consumer=opendct.consumer.FFmpegTransSageTVConsumerImpl
sagetv.device.-1440111961.delay_to_wait_after_tuning=0
sagetv.device.-1440111961.device_name=DCT-HDHomeRun Prime Tuner 131276A4-0
sagetv.device.-1440111961.encoder_listen_port=9000
sagetv.device.-1440111961.encoder_merit=0
sagetv.device.-1440111961.encoder_pool=dct
sagetv.device.-1440111961.exclusive_server_address=
sagetv.device.-1440111961.fast_network_encoder_switch=true
sagetv.device.-1440111961.last_channel=60
sagetv.device.-1440111961.transcode_profile=
sagetv.device.2049411248.always_force_external_unlock=false
sagetv.device.2049411248.consumer=opendct.consumer.FFmpegTransSageTVConsumerImpl
sagetv.device.2049411248.delay_to_wait_after_tuning=0
sagetv.device.2049411248.device_name=HDHomeRun HDHR-US Tuner 10102DF2-0
sagetv.device.2049411248.encoder_listen_port=9000
sagetv.device.2049411248.encoder_merit=0
sagetv.device.2049411248.encoder_pool=qam
sagetv.device.2049411248.exclusive_server_address=
sagetv.device.2049411248.fast_network_encoder_switch=true
sagetv.device.2049411248.last_channel=-1
sagetv.device.2049411248.transcode_profile=
sagetv.device.2049411249.always_force_external_unlock=false
sagetv.device.2049411249.consumer=opendct.consumer.FFmpegTransSageTVConsumerImpl
sagetv.device.2049411249.delay_to_wait_after_tuning=0
sagetv.device.2049411249.device_name=HDHomeRun HDHR-US Tuner 10102DF2-1
sagetv.device.2049411249.encoder_listen_port=9000
sagetv.device.2049411249.encoder_merit=0
sagetv.device.2049411249.encoder_pool=qam
sagetv.device.2049411249.exclusive_server_address=
sagetv.device.2049411249.fast_network_encoder_switch=true
sagetv.device.2049411249.last_channel=-1
sagetv.device.2049411249.transcode_profile=
sagetv.device.global.ignore_devices_csv=
sagetv.device.global.only_devices_csv=
sagetv.device.global.required_devices_loaded_count=0
sagetv.device.global.required_devices_loaded_timeout_ms=30000
sagetv.device.parent.-1885618041.device_name=HDHomeRun HDHR-US 10102DF2
sagetv.device.parent.-1885618041.lineup=qam_hdhomerun_legacy
sagetv.device.parent.-1885618041.local_ip_override=
sagetv.device.parent.-1885618041.offline_scan=false
sagetv.device.parent.-1885618041.rtsp=opendct.video.rtsp.DCTRTSPClientImpl
sagetv.device.parent.1279973968.device_name=HDHomeRun DRI Tuner 131276A4
sagetv.device.parent.1279973968.http.producer=opendct.producer.HTTPProducerImpl
sagetv.device.parent.1279973968.lineup=dct_hdhomerun
sagetv.device.parent.1279973968.local_ip_override=
sagetv.device.parent.1279973968.offline_scan=false
sagetv.device.parent.1279973968.rtp.producer=opendct.producer.NIORTPProducerImpl
sagetv.device.parent.1279973968.rtsp=opendct.video.rtsp.DCTRTSPClientImpl
sagetv.early_port_assignment=false
sagetv.encoder_discovery_port=8271
sagetv.log_noop_and_size=false
sagetv.new.default_consumer_impl=opendct.consumer.FFmpegTransSageTVConsumerImpl
sagetv.new.default_transcode_profile=
sagetv.new.device.default_encoder_merit=0
sagetv.new.device.default_tuning_delay=0
sagetv.new.device.increment_port=false
sagetv.new.device.socket_server_port_high=9100
sagetv.new.device.socket_server_port_low=9001
sagetv.new.device.socket_server_shared_port=9000
sagetv.use_automatic_loopback=true
upnp.dct.fast_tuning=false
upnp.dct.hdhr_tuning=true
upnp.dct.http_tuning=true
upnp.dct.wait_for_streaming=15000
upnp.enabled=true
upnp.exp_legacy_capture_device=true
upnp.new.device.schema_filter_strings_csv=schemas-cetoncorp-com
upnp.new.device.search_interval_s=4
upnp.new.device.search_strings_csv=schemas-cetoncorp-com,schemas-dkeystone-com
upnp.qam.automap_reference_lookup=true
upnp.qam.automap_tuning_lookup=false
upnp.service.configuration.http_listen_port=8501
upnp.service.configuration.ignore_interfaces_csv=
upnp.service.configuration.ignore_local_ip_csv=
upnp.service.configuration.use_dct=true
version.config=4
version.program=0.4.49
Edit: This is the original HDHR

sagetv.device.2049411248.device_name=HDHomeRun HDHR-US Tuner 10102DF2-0
__________________

Sage Server: 8th gen Intel based system w/32GB RAM running Ubuntu Linux, HDHomeRun Prime with cable card for recording. Runs headless. Accessed via RD when necessary. Four HD-300 Extenders.

Last edited by tmiranda; 09-10-2016 at 09:34 AM.
Reply With Quote
  #1225  
Old 09-10-2016, 10:04 AM
Zogg Zogg is offline
Sage Advanced User
 
Join Date: May 2011
Location: Frisco, TX
Posts: 146
Quote:
Originally Posted by EnterNoEscape View Post
The HDHomeRun Prime might be tuned, but it shouldn't be locked or prevent future use. The tuning might be from looking up the channel for the older device. I double-checked the code that checks for that and it doesn't issue a stop, but there's a reason for that. Since it doesn't lock the device while it does the lookup, it's possible something else might want to tune and OpenDCT would end up hosing that devices tuning attempt. The HDHomeRun will drop the tuning attempt after some time because it's not actually streaming.
Thanks for checking on this. I was wondering if maybe OpenDCT was using the Prime tuner in this way, rather than a lookup table. I also thought the HDHR would time out sooner and drop the connection, but maybe I'm remembering wrong.
Reply With Quote
  #1226  
Old 09-10-2016, 10:43 AM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,535
Quote:
Originally Posted by Zogg View Post
Thanks for checking on this. I was wondering if maybe OpenDCT was using the Prime tuner in this way, rather than a lookup table. I also thought the HDHR would time out sooner and drop the connection, but maybe I'm remembering wrong.
The HDHomeRun doesn't provide a better way to find out the mapping of the virtual channels. As they are discovered, they are cached, but initially they need to be looked up by tuning. The InfiniTV devices actually have an accessible table and don't need this approach.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #1227  
Old 09-10-2016, 10:51 AM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,535
Quote:
Originally Posted by tmiranda View Post
I checked and I think the properties files is OK. I also made sure I am on the latest beta. Still can't see my original HDHR. Here is the contents of the properties file:

Code:
#OpenDCT Configuration File
#Sat Sep 10 10:52:21 EDT 2016
channels.prime.enable_all_channels=true
channels.prime.ignore_channels_csv=
channels.prime.ignore_names_containing_csv=Target Ads,VZ_URL_SOURCE,VZ_EPG_SOURCE
channels.prime.remove_duplicate_channels=true
channels.qam.automap_reference_lookup=true
channels.qam.automap_tuning_lookup=true
channels.update=true
consumer.ffmpeg.circular_buffer_size=7864320
consumer.ffmpeg.enhanced_logging=true
consumer.ffmpeg.fix_stream=true
consumer.ffmpeg.h264_pts_hack=false
consumer.ffmpeg.limit_logging=true
consumer.ffmpeg.linux_logging=true
consumer.ffmpeg.log_stream_details_for_all_programs=false
consumer.ffmpeg.max_analyze_duration=5000000
consumer.ffmpeg.min_analyze_duration=165440
consumer.ffmpeg.min_direct_flush_size=-1
consumer.ffmpeg.min_probe_size=165440
consumer.ffmpeg.min_upload_id_transfer_size=262144
consumer.ffmpeg.rw_buffer_size=262144
consumer.ffmpeg.thread_priority=8
consumer.ffmpeg.thread_rename_logging=false
consumer.ffmpeg.transcode_limit=2
consumer.ffmpeg.upload_id_enabled=false
consumer.ffmpeg.upload_id_port=7818
discovery.devices.exp_always_enable=true
discovery.devices_permitted=
discovery.exp_enabled=true
hdhr.allow_http_tuning=true
hdhr.allow_qam_http_tuning=true
hdhr.always_tune_legacy=false
hdhr.broadcast_port=64998
hdhr.broadcast_s=58
hdhr.discoverer_enabled=true
hdhr.exp_ignore_models=
hdhr.extend_transcode_profile=
hdhr.ignore_device_ids=
hdhr.locking=true
hdhr.offline_detection_min_bytes=10528
hdhr.retry_count=2
hdhr.smart_broadcast=true
hdhr.wait_for_offline_detection_s=8
hdhr.wait_for_streaming=15000
http.new.default_producer_impl=opendct.producer.HTTPProducerImpl
log.min_free_space=1073741824
log.remove_after_days=30
pm.enabled=true
pm.network.resume_timeout_ms=120000
pm.network.start_retry=120
pool.enabled=false
producer.http.std.thread_priority=9
producer.nio.udp_receive_buffer=13280
producer.rtp.nio.internal_udp_receive_buffer=1500
producer.rtp.nio.native_udp_receive_buffer=5312000
producer.rtp.nio.stalled_timeout_s=6
producer.rtp.nio.thread_priority=9
rtp.new.default_producer_impl=opendct.producer.NIORTPProducerImpl
rtsp.new.default_impl=opendct.video.rtsp.DCTRTSPClientImpl
rtsp.port_high=8500
rtsp.port_low=8300
sagetv.device.-1440111959.always_force_external_unlock=false
sagetv.device.-1440111959.consumer=opendct.consumer.FFmpegTransSageTVConsumerImpl
sagetv.device.-1440111959.delay_to_wait_after_tuning=0
sagetv.device.-1440111959.device_name=DCT-HDHomeRun Prime Tuner 131276A4-2
sagetv.device.-1440111959.encoder_listen_port=9000
sagetv.device.-1440111959.encoder_merit=0
sagetv.device.-1440111959.encoder_pool=dct
sagetv.device.-1440111959.exclusive_server_address=
sagetv.device.-1440111959.fast_network_encoder_switch=true
sagetv.device.-1440111959.last_channel=749
sagetv.device.-1440111959.transcode_profile=
sagetv.device.-1440111960.always_force_external_unlock=false
sagetv.device.-1440111960.consumer=opendct.consumer.FFmpegTransSageTVConsumerImpl
sagetv.device.-1440111960.delay_to_wait_after_tuning=0
sagetv.device.-1440111960.device_name=DCT-HDHomeRun Prime Tuner 131276A4-1
sagetv.device.-1440111960.encoder_listen_port=9000
sagetv.device.-1440111960.encoder_merit=0
sagetv.device.-1440111960.encoder_pool=dct
sagetv.device.-1440111960.exclusive_server_address=
sagetv.device.-1440111960.fast_network_encoder_switch=true
sagetv.device.-1440111960.last_channel=742
sagetv.device.-1440111960.transcode_profile=
sagetv.device.-1440111961.always_force_external_unlock=false
sagetv.device.-1440111961.consumer=opendct.consumer.FFmpegTransSageTVConsumerImpl
sagetv.device.-1440111961.delay_to_wait_after_tuning=0
sagetv.device.-1440111961.device_name=DCT-HDHomeRun Prime Tuner 131276A4-0
sagetv.device.-1440111961.encoder_listen_port=9000
sagetv.device.-1440111961.encoder_merit=0
sagetv.device.-1440111961.encoder_pool=dct
sagetv.device.-1440111961.exclusive_server_address=
sagetv.device.-1440111961.fast_network_encoder_switch=true
sagetv.device.-1440111961.last_channel=60
sagetv.device.-1440111961.transcode_profile=
sagetv.device.2049411248.always_force_external_unlock=false
sagetv.device.2049411248.consumer=opendct.consumer.FFmpegTransSageTVConsumerImpl
sagetv.device.2049411248.delay_to_wait_after_tuning=0
sagetv.device.2049411248.device_name=HDHomeRun HDHR-US Tuner 10102DF2-0
sagetv.device.2049411248.encoder_listen_port=9000
sagetv.device.2049411248.encoder_merit=0
sagetv.device.2049411248.encoder_pool=qam
sagetv.device.2049411248.exclusive_server_address=
sagetv.device.2049411248.fast_network_encoder_switch=true
sagetv.device.2049411248.last_channel=-1
sagetv.device.2049411248.transcode_profile=
sagetv.device.2049411249.always_force_external_unlock=false
sagetv.device.2049411249.consumer=opendct.consumer.FFmpegTransSageTVConsumerImpl
sagetv.device.2049411249.delay_to_wait_after_tuning=0
sagetv.device.2049411249.device_name=HDHomeRun HDHR-US Tuner 10102DF2-1
sagetv.device.2049411249.encoder_listen_port=9000
sagetv.device.2049411249.encoder_merit=0
sagetv.device.2049411249.encoder_pool=qam
sagetv.device.2049411249.exclusive_server_address=
sagetv.device.2049411249.fast_network_encoder_switch=true
sagetv.device.2049411249.last_channel=-1
sagetv.device.2049411249.transcode_profile=
sagetv.device.global.ignore_devices_csv=
sagetv.device.global.only_devices_csv=
sagetv.device.global.required_devices_loaded_count=0
sagetv.device.global.required_devices_loaded_timeout_ms=30000
sagetv.device.parent.-1885618041.device_name=HDHomeRun HDHR-US 10102DF2
sagetv.device.parent.-1885618041.lineup=qam_hdhomerun_legacy
sagetv.device.parent.-1885618041.local_ip_override=
sagetv.device.parent.-1885618041.offline_scan=false
sagetv.device.parent.-1885618041.rtsp=opendct.video.rtsp.DCTRTSPClientImpl
sagetv.device.parent.1279973968.device_name=HDHomeRun DRI Tuner 131276A4
sagetv.device.parent.1279973968.http.producer=opendct.producer.HTTPProducerImpl
sagetv.device.parent.1279973968.lineup=dct_hdhomerun
sagetv.device.parent.1279973968.local_ip_override=
sagetv.device.parent.1279973968.offline_scan=false
sagetv.device.parent.1279973968.rtp.producer=opendct.producer.NIORTPProducerImpl
sagetv.device.parent.1279973968.rtsp=opendct.video.rtsp.DCTRTSPClientImpl
sagetv.early_port_assignment=false
sagetv.encoder_discovery_port=8271
sagetv.log_noop_and_size=false
sagetv.new.default_consumer_impl=opendct.consumer.FFmpegTransSageTVConsumerImpl
sagetv.new.default_transcode_profile=
sagetv.new.device.default_encoder_merit=0
sagetv.new.device.default_tuning_delay=0
sagetv.new.device.increment_port=false
sagetv.new.device.socket_server_port_high=9100
sagetv.new.device.socket_server_port_low=9001
sagetv.new.device.socket_server_shared_port=9000
sagetv.use_automatic_loopback=true
upnp.dct.fast_tuning=false
upnp.dct.hdhr_tuning=true
upnp.dct.http_tuning=true
upnp.dct.wait_for_streaming=15000
upnp.enabled=true
upnp.exp_legacy_capture_device=true
upnp.new.device.schema_filter_strings_csv=schemas-cetoncorp-com
upnp.new.device.search_interval_s=4
upnp.new.device.search_strings_csv=schemas-cetoncorp-com,schemas-dkeystone-com
upnp.qam.automap_reference_lookup=true
upnp.qam.automap_tuning_lookup=false
upnp.service.configuration.http_listen_port=8501
upnp.service.configuration.ignore_interfaces_csv=
upnp.service.configuration.ignore_local_ip_csv=
upnp.service.configuration.use_dct=true
version.config=4
version.program=0.4.49
Edit: This is the original HDHR

sagetv.device.2049411248.device_name=HDHomeRun HDHR-US Tuner 10102DF2-0
Everything looks fine. Can you restart the SageTV service, then post the opendct.log and sagetv log files? The only other possibility is the devices aren't being discovered, so we need to determine which side is failing us.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #1228  
Old 09-10-2016, 11:02 AM
Zogg Zogg is offline
Sage Advanced User
 
Join Date: May 2011
Location: Frisco, TX
Posts: 146
Quote:
Originally Posted by EnterNoEscape View Post
The HDHomeRun doesn't provide a better way to find out the mapping of the virtual channels. As they are discovered, they are cached, but initially they need to be looked up by tuning. The InfiniTV devices actually have an accessible table and don't need this approach.
My provider, Frontier Fios, does move channels around sometimes. Is there a way to flush or reset the cache without stopping/restarting the service? Although that can be done in a script so I suppose that would work as I have a nightly script that checks for channel changes.
Reply With Quote
  #1229  
Old 09-10-2016, 11:11 AM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,535
Quote:
Originally Posted by Zogg View Post
My provider, Frontier Fios, does move channels around sometimes. Is there a way to flush or reset the cache without stopping/restarting the service? Although that can be done in a script so I suppose that would work as I have a nightly script that checks for channel changes.
Currently no. The problem is if all of the CableCARD tuners are in use and the needed channel hasn't been tuned recently by a tuner with a CableCARD, then we can't get the mapping. I can add an option to always look the mapping up, but the results may not be ideal for Prime users.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #1230  
Old 09-10-2016, 11:20 AM
tmiranda's Avatar
tmiranda tmiranda is offline
SageTVaholic
 
Join Date: Jul 2005
Location: Central Florida, USA
Posts: 5,835
Quote:
Originally Posted by EnterNoEscape View Post
Everything looks fine. Can you restart the SageTV service, then post the opendct.log and sagetv log files? The only other possibility is the devices aren't being discovered, so we need to determine which side is failing us.
Attached.
Attached Files
File Type: zip Archive.zip (653.5 KB, 17 views)
__________________

Sage Server: 8th gen Intel based system w/32GB RAM running Ubuntu Linux, HDHomeRun Prime with cable card for recording. Runs headless. Accessed via RD when necessary. Four HD-300 Extenders.
Reply With Quote
  #1231  
Old 09-10-2016, 11:36 AM
tmiranda's Avatar
tmiranda tmiranda is offline
SageTVaholic
 
Join Date: Jul 2005
Location: Central Florida, USA
Posts: 5,835
Quote:
Originally Posted by tmiranda View Post
Attached.
Ah, now it's showing up! Not sure what I did differently.
__________________

Sage Server: 8th gen Intel based system w/32GB RAM running Ubuntu Linux, HDHomeRun Prime with cable card for recording. Runs headless. Accessed via RD when necessary. Four HD-300 Extenders.
Reply With Quote
  #1232  
Old 09-10-2016, 11:36 AM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,535
The SageTV log indicates that you should be seeing them. Just as a note, OpenDCT only prepends DCT on CableCARD tuners.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #1233  
Old 09-10-2016, 03:04 PM
Fuzzy's Avatar
Fuzzy Fuzzy is offline
SageTVaholic
 
Join Date: Sep 2005
Location: Jurupa Valley, CA
Posts: 9,957
Quote:
Originally Posted by tmiranda View Post
Ah, now it's showing up! Not sure what I did differently.
Did you by chance not restart the service? because currently Sage will only look for network encoders on startup.
__________________
Buy Fuzzy a beer! (Fuzzy likes beer)

unRAID Server: i7-6700, 32GB RAM, Dual 128GB SSD cache and 13TB pool, with SageTVv9, openDCT, Logitech Media Server and Plex Media Server each in Dockers.
Sources: HRHR Prime with Charter CableCard. HDHR-US for OTA.
Primary Client: HD-300 through XBoxOne in Living Room, Samsung HLT-6189S
Other Clients: Mi Box in Master Bedroom, HD-200 in kids room
Reply With Quote
  #1234  
Old 09-10-2016, 04:39 PM
tmiranda's Avatar
tmiranda tmiranda is offline
SageTVaholic
 
Join Date: Jul 2005
Location: Central Florida, USA
Posts: 5,835
Quote:
Originally Posted by Fuzzy View Post
Did you by chance not restart the service? because currently Sage will only look for network encoders on startup.
Yes, that was the issue.

Now if I could only get my cable company to update the lineup. They moved all the physical channel mappings but didn't update the lineup
__________________

Sage Server: 8th gen Intel based system w/32GB RAM running Ubuntu Linux, HDHomeRun Prime with cable card for recording. Runs headless. Accessed via RD when necessary. Four HD-300 Extenders.
Reply With Quote
  #1235  
Old 09-10-2016, 04:42 PM
Fuzzy's Avatar
Fuzzy Fuzzy is offline
SageTVaholic
 
Join Date: Sep 2005
Location: Jurupa Valley, CA
Posts: 9,957
Quote:
Originally Posted by tmiranda View Post
Yes, that was the issue.

Now if I could only get my cable company to update the lineup. They moved all the physical channel mappings but didn't update the lineup
Have you tried power cycling the prime (or tuning adapter if you use one)? Might force it to get new info.
__________________
Buy Fuzzy a beer! (Fuzzy likes beer)

unRAID Server: i7-6700, 32GB RAM, Dual 128GB SSD cache and 13TB pool, with SageTVv9, openDCT, Logitech Media Server and Plex Media Server each in Dockers.
Sources: HRHR Prime with Charter CableCard. HDHR-US for OTA.
Primary Client: HD-300 through XBoxOne in Living Room, Samsung HLT-6189S
Other Clients: Mi Box in Master Bedroom, HD-200 in kids room
Reply With Quote
  #1236  
Old 09-11-2016, 05:07 AM
tmiranda's Avatar
tmiranda tmiranda is offline
SageTVaholic
 
Join Date: Jul 2005
Location: Central Florida, USA
Posts: 5,835
Quote:
Originally Posted by Fuzzy View Post
Have you tried power cycling the prime (or tuning adapter if you use one)? Might force it to get new info.
Tried that. I called it in to the cable company tech support and they confirmed the problem was on their end. They told me they requested the changes from Comcast (who they buy the signal from) and it will take 2-3 weeks to correct. One of the downsides of having a small cable company.

A little OT but I'm interested in hearing opinions: I am using the composite video outputs (connected to a very old Hauppauge card) of ancient Motorola box to tune some of the channels. They have a Motorola 6200 which is HD compatible and has component and composite outputs in addition to HDMI. Have they closed the "analog hole" or will the composite video outputs produce video?
__________________

Sage Server: 8th gen Intel based system w/32GB RAM running Ubuntu Linux, HDHomeRun Prime with cable card for recording. Runs headless. Accessed via RD when necessary. Four HD-300 Extenders.
Reply With Quote
  #1237  
Old 09-11-2016, 07:03 AM
Tiki's Avatar
Tiki Tiki is offline
Sage Icon
 
Join Date: Feb 2005
Location: Southwest Florida, USA
Posts: 1,854
Quote:
Originally Posted by tmiranda View Post
Tried that. I called it in to the cable company tech support and they confirmed the problem was on their end. They told me they requested the changes from Comcast (who they buy the signal from) and it will take 2-3 weeks to correct. One of the downsides of having a small cable company.

A little OT but I'm interested in hearing opinions: I am using the composite video outputs (connected to a very old Hauppauge card) of ancient Motorola box to tune some of the channels. They have a Motorola 6200 which is HD compatible and has component and composite outputs in addition to HDMI. Have they closed the "analog hole" or will the composite video outputs produce video?
I would expect those outputs to work.
__________________
Server: Athlon II X4 630 CPU, Gigabyte MA770T-UD3P (AM3) Motherboard, VisionTek Radeon HD4670 PCIe w/ Component output to 50" CRT Rear-Projection HDTV (Mitsubishi), Win7-64Bit (Home Premium), 4GB RAM
Capture Devices (8 tuners): Colossus (x1), HD-PVR (x1), HDHR Prime (x2)
,USBUIRT (multi-zone)
Source:
Comcast Cable
Primary Client: Server Other Clients: (1) HD200, (1) HD300
Retired Equipment: MediaMVP, PVR150 (x2), PVR150MCE,
HDHR, HVR-2250
Reply With Quote
  #1238  
Old 09-11-2016, 10:48 AM
Eckwell's Avatar
Eckwell Eckwell is offline
Sage Aficionado
 
Join Date: Apr 2007
Posts: 289
LIVE TV and Tuning not working - Preview does though

So i am pulling my hair out now... trying to figure this out and hoping someone has suggestions. I installed OpenDCT to provide tuners for SageTV from my HDHomeRun Cable Card box. I am too the point were i see the tuners in Sage, and can set them up, I can preview channels in the sources setup screen, BUT when try to watch LiveTV or schedule something, SageTV cannot tune it. It is just a blank screen.

Any thoughts on what might be happening?
__________________
Eckwell / Chicago, IL
SERVER: AMD Phenom III 8750 Black / 4 GB / XP Pro / JV1.6.24 / V7 / 2 PVR-HD (DirectTV) & HDHR (2xATSC)
STORAGE: WD Raptor36GB boot / 11TB in 2 eSATA enclosure
DEFAULT STV
Comskip triggered by DirMON2 --- HD100 / HD200 /HD300
BMI fanart
Reply With Quote
  #1239  
Old 09-11-2016, 02:49 PM
Eckwell's Avatar
Eckwell Eckwell is offline
Sage Aficionado
 
Join Date: Apr 2007
Posts: 289
Found something wrong...

Quote:
Originally Posted by Eckwell View Post
So i am pulling my hair out now... trying to figure this out and hoping someone has suggestions. I installed OpenDCT to provide tuners for SageTV from my HDHomeRun Cable Card box. I am too the point were i see the tuners in Sage, and can set them up, I can preview channels in the sources setup screen, BUT when try to watch LiveTV or schedule something, SageTV cannot tune it. It is just a blank screen.

Any thoughts on what might be happening?
So it seems that SageTv is having issues with one of my drives and it had nothing to do with OpenDCT... troubleshooting now. All favorites disappeared and everything is now ARCHIVED. ugh
__________________
Eckwell / Chicago, IL
SERVER: AMD Phenom III 8750 Black / 4 GB / XP Pro / JV1.6.24 / V7 / 2 PVR-HD (DirectTV) & HDHR (2xATSC)
STORAGE: WD Raptor36GB boot / 11TB in 2 eSATA enclosure
DEFAULT STV
Comskip triggered by DirMON2 --- HD100 / HD200 /HD300
BMI fanart
Reply With Quote
  #1240  
Old 09-11-2016, 03:54 PM
Eckwell's Avatar
Eckwell Eckwell is offline
Sage Aficionado
 
Join Date: Apr 2007
Posts: 289
Quote:
Originally Posted by Eckwell View Post
So it seems that SageTv is having issues with one of my drives and it had nothing to do with OpenDCT... troubleshooting now. All favorites disappeared and everything is now ARCHIVED. ugh
Thank goodness for backups... did a restore, dropped the REC1 drive as it seemed to be finicky, and all is well. OpenDCT works without flaw so far.

Now to swap out that REC1 drive (dtill have REC2, REC3, and REC4...lol)
__________________
Eckwell / Chicago, IL
SERVER: AMD Phenom III 8750 Black / 4 GB / XP Pro / JV1.6.24 / V7 / 2 PVR-HD (DirectTV) & HDHR (2xATSC)
STORAGE: WD Raptor36GB boot / 11TB in 2 eSATA enclosure
DEFAULT STV
Comskip triggered by DirMON2 --- HD100 / HD200 /HD300
BMI fanart
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ATI TV Wonder Digital Cable Tuner & SageTV nyle Hardware Support 4 02-17-2009 10:12 PM
ATI TV Wonder Digital Cable Tuner rajczi Hardware Support 4 01-14-2008 08:24 PM
ATI TV Wonder™ Digital Cable Tuner dadams Hardware Support 4 01-09-2007 10:55 AM
Digital Cable - one guide - need HD on one tuner reg tv on other Kimper SageTV Beta Test Software 14 11-27-2006 08:15 PM
Multi-tuner Digital Cable mlbdude SageTV Software 0 06-26-2003 01:08 PM


All times are GMT -6. The time now is 01:01 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.