SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support

Notices

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 12-16-2015, 06:59 AM
KryptoNyte's Avatar
KryptoNyte KryptoNyte is offline
Sage Icon
 
Join Date: Dec 2006
Posts: 2,422
I've had this happen countless times ... whenever there is a halted recording due to some issue with the cable feed or the Prime tuner failure. If Sage can't tune the channel, it seems to be spinning circles on all clients and the server GUI until the tuning failure is resolved. This would eventually be accompanied by a System Message "Recording Missed Due to Capture Device Failure" followed by a (x8) or a (x19) for example. When this occurs, Sage is completely frozen while it's trying to work out the re-tuning and consecutive failure on the re-tune, which can last for 5 to 10 minutes in my experience.

Fuzzy, it's hard to imagine that you've never had a halted recording like the one described above?

From a programming standpoint, I supposed it would be referred to as Sage/Tuner error handling when there is a signal/feed problem from the cable company perhaps?
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ATI TV Wonder Digital Cable Tuner & SageTV nyle Hardware Support 4 02-17-2009 10:12 PM
ATI TV Wonder Digital Cable Tuner rajczi Hardware Support 4 01-14-2008 08:24 PM
ATI TV Wonder™ Digital Cable Tuner dadams Hardware Support 4 01-09-2007 10:55 AM
Digital Cable - one guide - need HD on one tuner reg tv on other Kimper SageTV Beta Test Software 14 11-27-2006 08:15 PM
Multi-tuner Digital Cable mlbdude SageTV Software 0 06-26-2003 01:08 PM


All times are GMT -6. The time now is 03:23 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.