SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support

Notices

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-17-2007, 05:00 PM
smo smo is offline
Sage User
 
Join Date: Nov 2006
Posts: 12
Cable signal resets computer...

Heres an odd one for ya,
While running SageTV with a PVR-350, the computer will reset every time you change channels. This happens ONLY if the CATV line is plugged in. If not CATV line is hooked up, you can change channels from static to static all day with no reset.

I initially thought it may be a ground issue, but after some trials I found that it is the center conductor of the cable that is causing it to reset. The shield alone does not cause a problem, only the center conductor.

I have tried it in three different rooms, and each room's CATV line give the same reseting result.

You can watch TV just fine as long as you don't try to change the channels!

Any ideas or suggestions? My only guess is that the card (PVR-350) is bad.

Thanks much
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Interactive Digital Cable Ready oddjob General Discussion 2 03-09-2007 07:58 PM
Cable signal quality issues -- do I need an amp? null_pointer_us Hardware Support 8 02-26-2007 05:19 PM
First time setup - anolog cable signal looks real poor vorius Hardware Support 25 09-19-2006 02:14 PM
Will this weaken my Cable signal johnson636 Hardware Support 1 01-26-2006 12:30 AM
Coax (composite) to S-Video korben_dallas General Discussion 8 11-24-2004 04:58 PM


All times are GMT -6. The time now is 01:50 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.