URC MX-700 remote layout for the STX-HD100 extender

[Opus4]

I've attached zip files that can be used to create a "SAGE" device on a Home Theater MX-700 remote. The files consist of:

1. SageTV_STX-HD100_Device_from_URC.zip
   
   This is a device file from Universal Remote Control that replicates the STX-HD100's remote's IR codes, plus the discrete on/off codes. You could use this to create your own preferred layout from scratch. This device will be added to the built-in codes in a future URC live update for your remote's editor.
   
   
   
2. MX-700_native_setup_for_STX-HD100.zip
   
   This is a device file to create a SAGE device using the native STX-HD100 codes from above, including discrete on/off codes, along with a few codes from the 34 button Hauppauge remote to fill out the rest of the MX-700's LCD buttons.
   
   Unless the HD100's remote interferes with other equipment you have, this is the preferred configuration.
   
   The zip file contains ReadMe.txt and STX-HD100 via Native Setup.mxd -- see the info in the readme file regarding how to import the devices in the MX-700 Editor. Don't forget: import the SAGE device last, or it will not have any other devices to link to. Note that this file uses native codes from the STX-HD100's remote, plus discrete on/off codes. Those native buttons should not need to be assigned to commands in SageTV. A few buttons have been mapped to IR codes from the old 34 button Hauppauge remote to allow all the MX-700's LCD buttons to be used, so you will need to assign those buttons in SageTV before they will work as expected.
   
   
   
   
3. MX-700_setup_for_STX-HD100.zip
   
   This is a device file to create a SAGE device using the Hauppauge 34 button and 45 button remotes.
   
   This configuration may be considered if the HD100's remote interferes with other equipment you have.
   
   This one is not a direct device that replicates the STX-HD100 remote, but a combination of buttons from the 34-button and 45-button Hauppauge remotes that can be used to fully control the STX-HD100, including to power it on & off and to start it on its servers list menu from a powered-off state.
   
   The zip file contains ReadMe.txt and STX-HD100 Setup.mxd -- see the info in the readme file regarding how to import the devices in the MX-700 Editor. Don't forget: import the SAGE device last, or it will not have any other devices to link to. Note that since this does not duplicate the codes from the STX-HD100 remote, you will need to do some button/command assigments in Detailed Setup while using the STX-HD100. Some buttons will already be assigned to their correct commands, but not all of them.

- Andy

.