SageTV Community  

Go Back   SageTV Community > SageTV Products > SageTV Media Extender

Notices

SageTV Media Extender Discussion related to any SageTV Media Extender used directly by SageTV. Questions, issues, problems, suggestions, etc. relating to a SageTV supported media extender should be posted here. Use the SageTV HD Theater - Media Player forum for issues related to using an HD Theater while not connected to a SageTV server.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-18-2008, 08:46 AM
glennsantacruz glennsantacruz is offline
New Member
 
Join Date: Dec 2008
Posts: 1
Remote control - change IR frequency??

I have an HD extender (not the latest HD200, but the earlier STX100), and have a problem with the remote control IR frequency. The STX100 remote seems to "overlap" my television remote frequency -- meaning that if I press the power button on my STX100 remote, it changes my television input source! Similarly, if I "volume up" on the STX100, my television changes channels. Is there any way to remap/change the STX100 remote control settings for *each* button (including power) so that I can remove the overlap?

Or do you have other suggestions for solving this problem (short of black tape over the TV IR receiver -- I do want to continue using the TV remote for other functions, like source input change, etc.)
Reply With Quote
  #2  
Old 12-18-2008, 09:40 AM
Opus4's Avatar
Opus4 Opus4 is offline
Administrator
 
Join Date: Sep 2003
Location: NJ
Posts: 19,614
The last time this came up, it seemed like the TV wasn't properly filtering the IR codes it would respond to -- it would repsond to the HD100's remote, but the HD100 wouldn't respond to the TV's remote. Is that the case?

You can't reprogram the HD100's remote, but you can reprogram what the HD100 responds to. To do this, however, you would need to have another remote the HD100 can recognize or be able to manually program the codes that the remote uses. Even then, you could run into problems because of the IR code for power.

There probably isn't a good solution to remote conflicts... unless the TV is real old & ready for replacement.

- Andy
__________________
SageTV Open Source v9 is available.
- Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1.
- Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus
- HD Extenders: A) FAQs B) URC MX-700 remote setup
Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Unable to change 4 digit channels with MCE remote? m1k3g Hardware Support 2 12-12-2008 09:12 PM
MVP Slow Remote Control Response wvd SageTV Media Extender 11 05-30-2008 02:15 AM
Firefly Remote - can it control TV? bialio Hardware Support 0 05-25-2007 01:34 PM
Weird remote control behavior… wrems Hardware Support 2 05-15-2007 08:33 AM
Universal Remote to Control MediaMVP unit? OneThomas SageTV Media Extender 4 10-30-2006 10:41 PM


All times are GMT -6. The time now is 08:05 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.