SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support

Notices

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

Reply
 
Thread Tools Search this Thread Display Modes
  #2801  
Old 11-23-2020, 11:34 AM
egeller egeller is offline
Sage Aficionado
 
Join Date: Feb 2006
Location: Drexel Hill, PA
Posts: 262
Quote:
Originally Posted by egeller View Post
@ENE:
I find that my WMC provided channels are throwing an error in OpenDCT
This morning I remembered that I had a test instance of Sage and OpenDCT on a Windows VM. I got that working, and for now, it provides streaming of WMC to my production SageTV instance on Unraid. The OpenDCT version on the VM is 0.5.29

I then examined the two properties files comparing Windows to Unraid's version for the WMC tuner. I made sure that the WMC tuner configuration was the same for both Windows and Unraid.
I am still getting the following messages from the 0.5.31 version on Unraid:
12:23:13.129 [SageTVRequestHandler-76:GenIP2] ERROR SageTVRequestHandler - SageTV sent: 'BUFFER GenIP2 HDMI|1203977263|1840|16777216|/var/media/tv/GenIP2ontruncheonhome9000HDMI-0.mpgbuf|Great-H.264', Replied: 'ERROR Device Start Failed'
12:23:13.129 [SageTVRequestHandler-76:GenIP2] ERROR SageTVRequestHandler - Unexpected exception while starting buffered network encoder to filename '/var/media/tv/GenIP2ontruncheonhome9000HDMI-0.mpgbuf' => java.lang.NullPointerException
at opendct.capture.GenericHttpCaptureDevice.startEncodingSync(GenericHttpCaptureDevice.java:346)
at opendct.capture.GenericHttpCaptureDevice.startEncoding(GenericHttpCaptureDevice.java:305)
at opendct.sagetv.SageTVRequestHandler.run(SageTVRequestHandler.java:301)
at opendct.util.ThreadPool$1.run(ThreadPool.java:39)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at java.lang.Thread.run(Thread.java:745)

So for now, I'll keep the Windows version running for WMC, until I can get it working on Unraid again.
__________________
Server:UnRaid;2x Intel Xeon E5; SuperMicro moboard;Also:BM3000 w/ WMC; 2x Ceton ETH 6; OpenDCT
SageTV Extender:3x HD200 1x HD300
Sage TV: 9.2.1, Standard STVi, Comskip Playback, Web Interface, 24 Hour Clock, SRE, YouTube2015, Playon
All in lovely Drexel Hill, PA
Reply With Quote
  #2802  
Old Yesterday, 09:55 AM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,635
OpenDCT 0.5.32-Stable


  • Fixed full pointer exception when producer doesn't exist for HTTP.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #2803  
Old Yesterday, 09:59 AM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,635
Quote:
Originally Posted by egeller View Post
This morning I remembered that I had a test instance of Sage and OpenDCT on a Windows VM. I got that working, and for now, it provides streaming of WMC to my production SageTV instance on Unraid. The OpenDCT version on the VM is 0.5.29

I then examined the two properties files comparing Windows to Unraid's version for the WMC tuner. I made sure that the WMC tuner configuration was the same for both Windows and Unraid.
I am still getting the following messages from the 0.5.31 version on Unraid:
12:23:13.129 [SageTVRequestHandler-76:GenIP2] ERROR SageTVRequestHandler - SageTV sent: 'BUFFER GenIP2 HDMI|1203977263|1840|16777216|/var/media/tv/GenIP2ontruncheonhome9000HDMI-0.mpgbuf|Great-H.264', Replied: 'ERROR Device Start Failed'
12:23:13.129 [SageTVRequestHandler-76:GenIP2] ERROR SageTVRequestHandler - Unexpected exception while starting buffered network encoder to filename '/var/media/tv/GenIP2ontruncheonhome9000HDMI-0.mpgbuf' => java.lang.NullPointerException
at opendct.capture.GenericHttpCaptureDevice.startEncodingSync(GenericHttpCaptureDevice.java:346)
at opendct.capture.GenericHttpCaptureDevice.startEncoding(GenericHttpCaptureDevice.java:305)
at opendct.sagetv.SageTVRequestHandler.run(SageTVRequestHandler.java:301)
at opendct.util.ThreadPool$1.run(ThreadPool.java:39)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at java.lang.Thread.run(Thread.java:745)

So for now, I'll keep the Windows version running for WMC, until I can get it working on Unraid again.
I created a problem for you with the latest update. I believe all you will need to do is restart the OpenDCT docker container and it will update to this version with the fix in it.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #2804  
Old Yesterday, 08:17 PM
egeller egeller is offline
Sage Aficionado
 
Join Date: Feb 2006
Location: Drexel Hill, PA
Posts: 262
Quote:
Originally Posted by EnterNoEscape View Post
I created a problem for you with the latest update. I believe all you will need to do is restart the OpenDCT docker container and it will update to this version with the fix in it.
Many thanks. I appreciate it. I will give it a try and get back to you if there are problems.

Edit.
It worked. In the Unraid log I saw the new version download and unpack. After the restart, I tested a channel and it appeared. Thanks again.
__________________
Server:UnRaid;2x Intel Xeon E5; SuperMicro moboard;Also:BM3000 w/ WMC; 2x Ceton ETH 6; OpenDCT
SageTV Extender:3x HD200 1x HD300
Sage TV: 9.2.1, Standard STVi, Comskip Playback, Web Interface, 24 Hour Clock, SRE, YouTube2015, Playon
All in lovely Drexel Hill, PA

Last edited by egeller; Yesterday at 08:48 PM. Reason: Reported update.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ATI TV Wonder Digital Cable Tuner & SageTV nyle Hardware Support 4 02-17-2009 10:12 PM
ATI TV Wonder Digital Cable Tuner rajczi Hardware Support 4 01-14-2008 08:24 PM
ATI TV Wonder™ Digital Cable Tuner dadams Hardware Support 4 01-09-2007 10:55 AM
Digital Cable - one guide - need HD on one tuner reg tv on other Kimper SageTV Beta Test Software 14 11-27-2006 08:15 PM
Multi-tuner Digital Cable mlbdude SageTV Software 0 06-26-2003 01:08 PM


All times are GMT -6. The time now is 04:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.