SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support

Notices

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-10-2010, 06:25 PM
smitz smitz is offline
Sage User
 
Join Date: Mar 2006
Posts: 10
USB-UIRT Tunes Only #7 on both STBs

I have two Verizon FIOS STBs (QIP2500-3) being controlled by USB-UIRT. Each STB can be tuned to any channel independently unless the channel has #7 in it. When the USB-UIRT tunes #7, it sends it to both boxes. Anyone else have this problem?
Reply With Quote
  #2  
Old 10-10-2010, 11:41 PM
Spectrum Spectrum is offline
Sage Expert
 
Join Date: Aug 2006
Posts: 720
It sounds like the remote code for 7 is being broadcast to multiple zones. Look in your config file
Code:
...SageTV\Common\RemoteCodes\USB-UIRT Transceiver\{YOUR_config}.ir
and make sure that the entry for 7 has the correct zone info.

It should be something like
Code:
7 Z20000 ... 0D2B
That's for zone 2. If there is no Z* (where * is the zone number) it will broadcast it to all zones I think
Reply With Quote
  #3  
Old 10-11-2010, 10:51 PM
smitz smitz is offline
Sage User
 
Join Date: Mar 2006
Posts: 10
That was it Spectrum. My USB-UIRT has worked so great I forgot about the initial setup of the zones. Z2 was missing from my 2nd STB config. I also found that Z1 was missing from a couple numbers in my 1st STB config.

Thanks for your help.

Reply With Quote
  #4  
Old 10-12-2010, 02:23 PM
Spectrum Spectrum is offline
Sage Expert
 
Join Date: Aug 2006
Posts: 720
Quite welcome. It's always the little things
Reply With Quote
Reply

Tags
fios, qip2500-3, usb-uirt


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
MODIFIED: Simple Utility to Control Multiple DirecTV STBs via USB or Serial ports jchiso Hardware Support 10 07-05-2013 04:07 PM
Simple utility to control multiple USB or Serial HD DirecTV STBs jchiso Hardware Support 15 02-19-2009 06:27 PM
USB-UIRT, BellExpressVu and STBs woes jesse_breaker Hardware Support 1 02-06-2007 11:05 PM
SageTV, USB-UIRT, 2 6200 STBs... how do I control both independently? reboot_this Hardware Support 2 10-02-2004 01:29 PM
UIRT & Actisys for two STBs - No working oshapir Hardware Support 8 06-22-2004 12:34 PM


All times are GMT -6. The time now is 07:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.