SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support

Notices

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-15-2011, 07:25 PM
DaveS DaveS is offline
Sage Advanced User
 
Join Date: Jan 2008
Location: Fairfax, VA
Posts: 100
Hauppauge 2250 acting strangely

A couple of months ago I upgraded my WinXP server with Windows 7 and did a new install of SageTV, and I'm using the same Hauppauge 2250 and HD-PVR I used with the XP server. Lately I've been seeing intermittent strange behavior from my Hauppauge 2250. (I have the 2250 set up with one tuner as analog to capture basic cable and one tuner set up as digital for clear qam.)

The strange behavior is occasionally the analog tuner records a show normally (I think) but when I play the recording, the progress bar moves 4 seconds at a time (4 seconds for every second watched.) If the show is supposed to be an hour long, I can only play the first 15 minutes of it while the progress bar shows 60 minutes. At the end of the 60 minutes on the progress bar, the show playback ends and I don't get to see anything past those first 15 minutes. I"m not sure, but it might only be recording this way when the other half of the 2250 or the HD-PVR is recording at the same time.

I have the latest drivers loaded for the 2250 and the HD-PVR and I"m using the most current version of Sagetv and the most current firmware in my HD200's. Has anyone experienced this behavior?
__________________
Dave S
Windows 10, Sagetv 9.2.1 64b, OpendDCT 0.5.29, 8gb ram, HDHR Prime, 3 HD300
Reply With Quote
  #2  
Old 02-15-2011, 07:45 PM
tmiranda's Avatar
tmiranda tmiranda is offline
SageTVaholic
 
Join Date: Jul 2005
Location: Central Florida, USA
Posts: 5,851
I had the same issue. You need to downgrade to an older 2250 driver.

Go to here: http://code.google.com/p/tmiranda/downloads/list

Download and install 22xxdrv_27323. (The name might be slightly different, it should be obvious.)

Tom
__________________

Sage Server: 8th gen Intel based system w/32GB RAM running Ubuntu Linux, HDHomeRun Prime with cable card for recording. Runs headless. Accessed via RD when necessary. Four HD-300 Extenders.
Reply With Quote
  #3  
Old 02-16-2011, 06:36 PM
DaveS DaveS is offline
Sage Advanced User
 
Join Date: Jan 2008
Location: Fairfax, VA
Posts: 100
Many thanks! I'll give that a try this weekend.
__________________
Dave S
Windows 10, Sagetv 9.2.1 64b, OpendDCT 0.5.29, 8gb ram, HDHR Prime, 3 HD300
Reply With Quote
  #4  
Old 02-19-2011, 03:00 PM
DaveS DaveS is offline
Sage Advanced User
 
Join Date: Jan 2008
Location: Fairfax, VA
Posts: 100
OK, I checked the 2250 driver on my old, XP build, and I was indeed using the older driver that you referred to, tmiranda. I loaded the old driver and I'm hoping it'll do the trick. It's difficult to tell for sure because the issue only happened intermittently with the newer driver. This seems to have solved that problem.

I did notice another problem, actually now that I think about it, it was a problem with the XP build that seemed to go away with my Win 7 build. I'm now thinking that the newer driver fixed that problem and it may have been a problem with the older driver we are both using.

I restarted my server and tested my three tuners; 1 analog, 1 digital, (both on the 2250), and my HD-PVR, in that order. The analog worked fine. The digital had video but no audio. I changed the channel and the audio started working. The HD-PVR was fine. I now remember that I frequently had no audio on the 2250 immediately after boot up. Changing the channel then activated the audio and it was fine thereafter until the next shut down and re-boot.

Have you run into this problem with your 2250?
__________________
Dave S
Windows 10, Sagetv 9.2.1 64b, OpendDCT 0.5.29, 8gb ram, HDHR Prime, 3 HD300
Reply With Quote
  #5  
Old 02-19-2011, 06:10 PM
tmiranda's Avatar
tmiranda tmiranda is offline
SageTVaholic
 
Join Date: Jul 2005
Location: Central Florida, USA
Posts: 5,851
Quote:
Originally Posted by DaveS View Post
Have you run into this problem with your 2250?
No, but I do not use Digital on the 2250, only analog.
__________________

Sage Server: 8th gen Intel based system w/32GB RAM running Ubuntu Linux, HDHomeRun Prime with cable card for recording. Runs headless. Accessed via RD when necessary. Four HD-300 Extenders.
Reply With Quote
  #6  
Old 02-19-2011, 06:23 PM
jptheripper jptheripper is offline
Sage Fanatic
 
Join Date: Dec 2007
Location: Florida
Posts: 956
im on vista 32bit ultimate, using driver
22xx_7.9.1.28162

recording both analog and digital no problem, dont know if that helps.
__________________
Gigabyte GA-MA770-DS3/4gb DDR2/AMD Phenom 955 3.2ghz Quad Core
Windows 7 64bit Home Premium
Hauppauge 1600/1850/2250/colossus/2650(CableCard 2 tuner)
8tb RAID5 storage/media/other &3tb RAID5 backup storage on a HighPoint RocketRaid 2680
1tb 3 disk Recording Pool
all in a beautiful Antec 1200
SageMyMovies/Comskip/PlayON/SageDCT/SRE
HD100/HD300 extenders
Reply With Quote
  #7  
Old 02-22-2011, 07:17 AM
DaveS DaveS is offline
Sage Advanced User
 
Join Date: Jan 2008
Location: Fairfax, VA
Posts: 100
Quote:
Originally Posted by jptheripper View Post
im on vista 32bit ultimate, using driver
22xx_7.9.1.28162

recording both analog and digital no problem, dont know if that helps.
Thanks for the response. I'm puzzled why I'm having these issues. I'll continue to search and also research the various driver changes by Hauppauge.
__________________
Dave S
Windows 10, Sagetv 9.2.1 64b, OpendDCT 0.5.29, 8gb ram, HDHR Prime, 3 HD300
Reply With Quote
Reply

Tags
hauppauge 2250, progress bar, recording playback, recording wrong time


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
HDHomeRun vs Hauppauge 2250 Diego Garcia Hardware Support 16 02-11-2010 10:22 PM
Hauppauge 2250 IR receiver Oats Hardware Support 0 11-16-2009 05:19 PM
How Is the Hauppauge HVR-2250? DFranch Hardware Support 4 07-13-2009 03:23 PM
SageTV acting strangely, can't wipe it from system... Sizam SageTV Software 2 04-21-2008 06:27 PM
Network encoder acting strangely ldavis SageTV Recorder Software 0 05-20-2004 10:43 AM


All times are GMT -6. The time now is 08:54 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.