SageTV Community  

Go Back   SageTV Community > SageTV International User Forums > SageTV United Kingdom

Notices

SageTV United Kingdom SageTV and SageTV Recorder Users from the UK - This forum is for you to post about specific issues using SageTV software in the UK.

Reply
 
Thread Tools Search this Thread Display Modes
  #161  
Old 10-02-2008, 06:11 PM
StephaneM's Avatar
StephaneM StephaneM is offline
Sage Icon
 
Join Date: Mar 2006
Location: France
Posts: 1,463
Quote:
Originally Posted by rickgillyon View Post
However, both come into the guide with the same Ep Id and the subtitle of Thursday's programme. Any ideas why the importer would assume them to be the same ep?
I can't reproduce the issue, with your lookup.xml file, both episodes does have a # EPGID, the first is EP0012470018 and the other EP0012470019.

However, the Importer does remember of episodes having the same ep.title but from a different season (S.11 Ep12 both part 1 and 2). But then again it autocorrect itself by only keeping the EPGID stored in the lookup table for the ep.number only...

Regards,
Stéphane.
Reply With Quote
  #162  
Old 10-03-2008, 01:27 AM
rickgillyon's Avatar
rickgillyon rickgillyon is offline
Sage Icon
 
Join Date: Sep 2005
Location: Whitley Bay, England
Posts: 1,944
I'm not too sure what that means, but both show in Sage with an ep number EP0012470019, Thursday's shows as a rerun with Original Air Date as the Wednesday, so it appears that the importer thinks the two this week are the same program, rather than any previous season - i.e. Wednesday's is first-run.
__________________
unRAID Server: Intel Core i5 7600K, 16GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x4TB SATA3 Parity Drive, 2x3TB + 1x4TB SATA Array, 1x TBS 6284 PCIe DVB-T2 Quad, 2x TBS 6205 PCIe DVB-T Quad, Cable TV from TBS2603 sat/IP, IPTV via Telly & node-ffmpeg-mpegts-proxy, unRAID 6.6.6, TVheadend for recording back end, OpenDCT, SDEPG, SageTV 9
Clients: 3 Nvidia Shields, 2 Android Miniclients (Amlogic S905X), 3 Win10 Pro PC Clients
Reply With Quote
  #163  
Old 10-11-2008, 05:24 PM
rickgillyon's Avatar
rickgillyon rickgillyon is offline
Sage Icon
 
Join Date: Sep 2005
Location: Whitley Bay, England
Posts: 1,944
This problem just happened again - in fact I believe it's probably happened several times, I've missed a few recordings that I've not looked into. In this case it recorded CSI:Miami marked S6 Ep10, Subtitled "My Nanny", aired 7/10. File is correctly named. Subsequently it has imported S6 Ep12, Subtitle "Miami Confidential", and assigned this the same Id EP0010600031. No earlier airings for this, no confusion in the data, I guess the importer has made the same mistake it made last time. I'll send my current data along, but I assume the 7/10 airing is no longer on the XML.

Files uploaded here Stephane, if you can take a look.

BTW, I say it has assigned the same EpId, that may not be true in the lookup.xml - but Sage shows both episodes with the ep id EP0010600031 and shows the 21/10 Ep having originally shown on 7/10.
__________________
unRAID Server: Intel Core i5 7600K, 16GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x4TB SATA3 Parity Drive, 2x3TB + 1x4TB SATA Array, 1x TBS 6284 PCIe DVB-T2 Quad, 2x TBS 6205 PCIe DVB-T Quad, Cable TV from TBS2603 sat/IP, IPTV via Telly & node-ffmpeg-mpegts-proxy, unRAID 6.6.6, TVheadend for recording back end, OpenDCT, SDEPG, SageTV 9
Clients: 3 Nvidia Shields, 2 Android Miniclients (Amlogic S905X), 3 Win10 Pro PC Clients

Last edited by rickgillyon; 10-11-2008 at 05:34 PM.
Reply With Quote
  #164  
Old 10-11-2008, 07:52 PM
StephaneM's Avatar
StephaneM StephaneM is offline
Sage Icon
 
Join Date: Mar 2006
Location: France
Posts: 1,463
Quote:
Originally Posted by rickgillyon View Post
In this case it recorded CSI:Miami marked S6 Ep10, Subtitled "My Nanny", aired 7/10. File is correctly named. Subsequently it has imported S6 Ep12, Subtitle "Miami Confidential", and assigned this the same Id EP0010600031. No earlier airings for this, no confusion in the data
The problem is that CSI: My Nanny can be found also with S6 Ep12 in XMLTV data, and that's where the mismatch comes from.

I aslo see that CSI: My Nanny were given EPGID ...030 at first (with correct ep. number), and then get back EPGID ...031 because it was showing S6 Ep12 numbers (the ep.numbers always win over the title => some show do have same ep.title but # ep.numbers)

Though in SageTV you should see the recorded show getting back the "Miami Confidential" ep.title (even though My Nanny was indeed recorded), what is the EPGID of the recorded show?

Regards,
Stéphane.
Reply With Quote
  #165  
Old 10-12-2008, 03:25 AM
rickgillyon's Avatar
rickgillyon rickgillyon is offline
Sage Icon
 
Join Date: Sep 2005
Location: Whitley Bay, England
Posts: 1,944
EPGID for both shows in Sage as EP0010600031.

So sorry, looking at the XML I see that you're right, it comes out as:
Code:
  <programme
    channel = "105"
    channel2 = "5"
    start = "20081007210000 +0000"
    stop = "20081007220000 +0000">
    <title>CSI: Miami</title>
    <desc>Crime drama series based on the work of forensic investigators. A nanny is found stabbed to death in her wealthy employers' home and a jealous teenage boy emerges as a key suspect.</desc>
    <category>Drama</category>
    <length units = "minutes">60</length>
    <episode-num system = "xmltv_ns">5.11.</episode-num>
    <sub-title>CSI: My Nanny</sub-title>
    <subtitles type = "teletext"/>
    <credits>
      <actor>David Caruso</actor>
      <actor>Khandi Alexander</actor>
      <actor>Emily Procter</actor>
      <actor>Adam Rodriguez</actor>
      <actor>Rex Linn</actor>
      <actor>Eva La Rue</actor>
    </credits>
  </programme>
But data in Digiguide is:
Code:
DRAMA: CSI: Miami
On: five (105)    
Date: Tuesday 7th October 2008 (Already shown)
Time: 21:00 to 22:00 (1 hour long)

CSI: My Nanny. Series 6, episode 10.
Crime drama series based on the work of forensic investigators. A nanny is found stabbed to death in her wealthy employers' home and a jealous teenage boy emerges as a key suspect.
(Subtitles)

Starring: David Caruso, Khandi Alexander, Emily Procter, Adam Rodriguez, Rex Linn, Eva La Rue
Looks like the grabber is messing the data not the importer, sorry Stephane - I was so certain after last time that it was the importer.

Any ideas, DG2XML people?
__________________
unRAID Server: Intel Core i5 7600K, 16GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x4TB SATA3 Parity Drive, 2x3TB + 1x4TB SATA Array, 1x TBS 6284 PCIe DVB-T2 Quad, 2x TBS 6205 PCIe DVB-T Quad, Cable TV from TBS2603 sat/IP, IPTV via Telly & node-ffmpeg-mpegts-proxy, unRAID 6.6.6, TVheadend for recording back end, OpenDCT, SDEPG, SageTV 9
Clients: 3 Nvidia Shields, 2 Android Miniclients (Amlogic S905X), 3 Win10 Pro PC Clients
Reply With Quote
  #166  
Old 10-14-2008, 02:59 AM
starfire starfire is offline
Sage Expert
 
Join Date: Mar 2008
Location: England, UK
Posts: 505
Quote:
Originally Posted by rickgillyon View Post
Any ideas, DG2XML people?
Probably worth PM'ing Nick W to see if he can help
Reply With Quote
  #167  
Old 10-18-2008, 05:09 AM
Dvid Dvid is offline
Sage User
 
Join Date: May 2008
Location: UK, South-East
Posts: 58
I'm geting an error while running DG2XML, it's been working fine up to now.

While updating the epg.xml, it errors with: "B2AC8/viewmultichannelgrid?htd=504&dt=1223723114&chi=14&noc=1 ERROR:'?', hexadecimal value 0x16, is an invalid character. Line 2035, position 71."

Any ideas? Thanks.
Reply With Quote
  #168  
Old 10-18-2008, 05:33 AM
Dvid Dvid is offline
Sage User
 
Join Date: May 2008
Location: UK, South-East
Posts: 58
Update: I removed the channel 15 (E4) from my Digiguide channel list and it ran through successfully. I then re-added E4, numbered it to channel 15 and ran DG2XML again. This time it went right to the end (chi=56) and gave the exact same error again. Before, it errored after chi=14.

I guess the DG2XML parser is seeing something it can't handle??
Reply With Quote
  #169  
Old 10-18-2008, 12:15 PM
PeterC PeterC is offline
Sage User
 
Join Date: Oct 2007
Posts: 55
Quote:
Originally Posted by Dvid View Post
Update: I removed the channel 15 (E4) from my Digiguide channel list and it ran through successfully. I then re-added E4, numbered it to channel 15 and ran DG2XML again. This time it went right to the end (chi=56) and gave the exact same error again. Before, it errored after chi=14.

I guess the DG2XML parser is seeing something it can't handle??
I have just checked mine and its working ok, I also have E4 in my listings so its probably not a fault with that channel's listings. I call DG2XML with noc=1000, all the other parameters are default.
Reply With Quote
  #170  
Old 10-19-2008, 01:29 AM
Nick_W Nick_W is offline
Sage Advanced User
 
Join Date: Aug 2007
Posts: 215
Quote:
Originally Posted by starfire View Post
Probably worth PM'ing Nick W to see if he can help
I'm here, can one of you give me specifics of what's wrong?

Regards,

Nick.
Reply With Quote
  #171  
Old 10-19-2008, 04:03 AM
rickgillyon's Avatar
rickgillyon rickgillyon is offline
Sage Icon
 
Join Date: Sep 2005
Location: Whitley Bay, England
Posts: 1,944
Hi Nick, thanks for having a look. We have this intermittent fault (we saw it previously in this thread with Massive) where the Episode numbers in he XML don't match those in DigiGuide. One example is below. The result is that future programmes can appear watched when they haven't been and therefore not record...

XML
Code:
  <programme
    channel = "105"
    channel2 = "5"
    start = "20081007210000 +0000"
    stop = "20081007220000 +0000">
    <title>CSI: Miami</title>
    <desc>Crime drama series based on the work of forensic investigators. A nanny is found stabbed to death in her wealthy employers' home and a jealous teenage boy emerges as a key suspect.</desc>
    <category>Drama</category>
    <length units = "minutes">60</length>
    <episode-num system = "xmltv_ns">5.11.</episode-num>
    <sub-title>CSI: My Nanny</sub-title>
    <subtitles type = "teletext"/>
    <credits>
      <actor>David Caruso</actor>
      <actor>Khandi Alexander</actor>
      <actor>Emily Procter</actor>
      <actor>Adam Rodriguez</actor>
      <actor>Rex Linn</actor>
      <actor>Eva La Rue</actor>
    </credits>
  </programme>
But data in Digiguide is:
Code:
DRAMA: CSI: Miami
On: five (105)    
Date: Tuesday 7th October 2008 (Already shown)
Time: 21:00 to 22:00 (1 hour long)

CSI: My Nanny. Series 6, episode 10.
Crime drama series based on the work of forensic investigators. A nanny is found stabbed to death in her wealthy employers' home and a jealous teenage boy emerges as a key suspect.
(Subtitles)

Starring: David Caruso, Khandi Alexander, Emily Procter, Adam Rodriguez, Rex Linn, Eva La Rue
It's not a one-off. Sometimes the bad data is fixed on the next extract, often not. The problem is, you have to be lucky to notice when it breaks... On this one I did a grab either side of checking it, so it wasn't a correction on DigiGuide.

Thanks!
__________________
unRAID Server: Intel Core i5 7600K, 16GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x4TB SATA3 Parity Drive, 2x3TB + 1x4TB SATA Array, 1x TBS 6284 PCIe DVB-T2 Quad, 2x TBS 6205 PCIe DVB-T Quad, Cable TV from TBS2603 sat/IP, IPTV via Telly & node-ffmpeg-mpegts-proxy, unRAID 6.6.6, TVheadend for recording back end, OpenDCT, SDEPG, SageTV 9
Clients: 3 Nvidia Shields, 2 Android Miniclients (Amlogic S905X), 3 Win10 Pro PC Clients
Reply With Quote
  #172  
Old 10-19-2008, 06:38 AM
Nick_W Nick_W is offline
Sage Advanced User
 
Join Date: Aug 2007
Posts: 215
Quote:
Originally Posted by rickgillyon View Post
Hi Nick, thanks for having a look. We have this intermittent fault (we saw it previously in this thread with Massive) where the Episode numbers in he XML don't match those in DigiGuide. One example is below. The result is that future programmes can appear watched when they haven't been and therefore not record...

XML
Code:
  <programme
    channel = "105"
    channel2 = "5"
    start = "20081007210000 +0000"
    stop = "20081007220000 +0000">
    <title>CSI: Miami</title>
    <desc>Crime drama series based on the work of forensic investigators. A nanny is found stabbed to death in her wealthy employers' home and a jealous teenage boy emerges as a key suspect.</desc>
    <category>Drama</category>
    <length units = "minutes">60</length>
    <episode-num system = "xmltv_ns">5.11.</episode-num>
    <sub-title>CSI: My Nanny</sub-title>
    <subtitles type = "teletext"/>
    <credits>
      <actor>David Caruso</actor>
      <actor>Khandi Alexander</actor>
      <actor>Emily Procter</actor>
      <actor>Adam Rodriguez</actor>
      <actor>Rex Linn</actor>
      <actor>Eva La Rue</actor>
    </credits>
  </programme>
But data in Digiguide is:
Code:
DRAMA: CSI: Miami
On: five (105)    
Date: Tuesday 7th October 2008 (Already shown)
Time: 21:00 to 22:00 (1 hour long)

CSI: My Nanny. Series 6, episode 10.
Crime drama series based on the work of forensic investigators. A nanny is found stabbed to death in her wealthy employers' home and a jealous teenage boy emerges as a key suspect.
(Subtitles)

Starring: David Caruso, Khandi Alexander, Emily Procter, Adam Rodriguez, Rex Linn, Eva La Rue
It's not a one-off. Sometimes the bad data is fixed on the next extract, often not. The problem is, you have to be lucky to notice when it breaks... On this one I did a grab either side of checking it, so it wasn't a correction on DigiGuide.

Thanks!
Hi,

Your going to have to give me an example that is actually current (i.e., in the guide data at the time of posting), and please make it from a freeview channel (like the one above).

Regards,

Nick.
Reply With Quote
  #173  
Old 10-19-2008, 08:55 AM
rickgillyon's Avatar
rickgillyon rickgillyon is offline
Sage Icon
 
Join Date: Sep 2005
Location: Whitley Bay, England
Posts: 1,944
You'll have to wait until I notice one!
__________________
unRAID Server: Intel Core i5 7600K, 16GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x4TB SATA3 Parity Drive, 2x3TB + 1x4TB SATA Array, 1x TBS 6284 PCIe DVB-T2 Quad, 2x TBS 6205 PCIe DVB-T Quad, Cable TV from TBS2603 sat/IP, IPTV via Telly & node-ffmpeg-mpegts-proxy, unRAID 6.6.6, TVheadend for recording back end, OpenDCT, SDEPG, SageTV 9
Clients: 3 Nvidia Shields, 2 Android Miniclients (Amlogic S905X), 3 Win10 Pro PC Clients
Reply With Quote
  #174  
Old 10-19-2008, 09:46 AM
Nick_W Nick_W is offline
Sage Advanced User
 
Join Date: Aug 2007
Posts: 215
Quote:
Originally Posted by rickgillyon View Post
You'll have to wait until I notice one!
No problem, just let me know asap so I can sort it
Reply With Quote
  #175  
Old 10-20-2008, 12:57 PM
Whitey's Avatar
Whitey Whitey is offline
Sage Advanced User
 
Join Date: Oct 2007
Location: Notts, England
Posts: 246
I've just recently started getting a strange problem that I think is linked to the guide data. When I set up a new series to record, the record icon is grey in each episode so they won't record so I have to manually set them up which obviously defeats the object. Does anyone know why this might be happening?

Thanks

Whitey
Reply With Quote
  #176  
Old 10-20-2008, 01:40 PM
Dvid Dvid is offline
Sage User
 
Join Date: May 2008
Location: UK, South-East
Posts: 58
Unhappy

I'm still getting this parsing error when I run DG2XML : "ERROR:'▬', hexadecimal value 0x16, is an invalid character. Line 895, position 71."

It happens whenever it encounters my E4 channel. So if I change the numbering order in Digiguide, wherever I put E4 in the numbering, this error appears in the output just as it is supposed to process the E4 channel data.

I'm a bit stuck now...looks like it isn't happening to others...Any ideas I can try?
Thanks.
Reply With Quote
  #177  
Old 10-21-2008, 03:06 AM
rickgillyon's Avatar
rickgillyon rickgillyon is offline
Sage Icon
 
Join Date: Sep 2005
Location: Whitley Bay, England
Posts: 1,944
Have you checked you're on the latest version of DG2XML and the skin?
__________________
unRAID Server: Intel Core i5 7600K, 16GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x4TB SATA3 Parity Drive, 2x3TB + 1x4TB SATA Array, 1x TBS 6284 PCIe DVB-T2 Quad, 2x TBS 6205 PCIe DVB-T Quad, Cable TV from TBS2603 sat/IP, IPTV via Telly & node-ffmpeg-mpegts-proxy, unRAID 6.6.6, TVheadend for recording back end, OpenDCT, SDEPG, SageTV 9
Clients: 3 Nvidia Shields, 2 Android Miniclients (Amlogic S905X), 3 Win10 Pro PC Clients
Reply With Quote
  #178  
Old 10-23-2008, 01:06 PM
Dvid Dvid is offline
Sage User
 
Join Date: May 2008
Location: UK, South-East
Posts: 58
Talking

I checked that I am on the latest version - there hasn't been an update since 1.0.10, so I'm current. But...it is now working, without me doing anything else.

As far as I can see it muct have been something the parser can't handle, but odd that no-one else saw it. I guess it's to do with my own setup.

Anyway, it's working fine again now

I think DG2XML and Stephane's importer deserve a medal - without them I wouldn't be using SageTV to be honest. Ideally they would be more tightly integrated with Sage iteself, but it works, so I'm happy. One day maybe we'll get a full UK EPG service.
Reply With Quote
  #179  
Old 10-24-2008, 02:46 AM
rickgillyon's Avatar
rickgillyon rickgillyon is offline
Sage Icon
 
Join Date: Sep 2005
Location: Whitley Bay, England
Posts: 1,944
I agree that this solution is an improvement, but Sage was more than usable when we just had Alan Birtles's RT Grabber and nielm's importer, so a tip of the hat to them

For me, it would be totally false to say that Sage would not be usable without this new software - it's been usable for years. But it's now even better...
__________________
unRAID Server: Intel Core i5 7600K, 16GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x4TB SATA3 Parity Drive, 2x3TB + 1x4TB SATA Array, 1x TBS 6284 PCIe DVB-T2 Quad, 2x TBS 6205 PCIe DVB-T Quad, Cable TV from TBS2603 sat/IP, IPTV via Telly & node-ffmpeg-mpegts-proxy, unRAID 6.6.6, TVheadend for recording back end, OpenDCT, SDEPG, SageTV 9
Clients: 3 Nvidia Shields, 2 Android Miniclients (Amlogic S905X), 3 Win10 Pro PC Clients
Reply With Quote
  #180  
Old 10-30-2008, 07:35 AM
rickgillyon's Avatar
rickgillyon rickgillyon is offline
Sage Icon
 
Join Date: Sep 2005
Location: Whitley Bay, England
Posts: 1,944
Okay Nick, I've finally noticed an example tonight for Silent Witness on BBC1. XML:
Code:
  <programme
    channel = "101"
    channel2 = "1"
    start = "20081030210000 +0000"
    stop = "20081030220000 +0000">
    <title>Silent Witness</title>
    <desc>Drama series about a team of forensic pathologists. As the search for Liam continues, Nikki's loyalty towards her former mentor is tested when the allegations of a former student are brought to the surface. Leo and Harry refuse to give up on the search, and they are soon on the trail of a toxic chemical, found in both bodies, which could provide them with Liam's whereabouts.</desc>
    <category>Drama</category>
    <length units = "minutes">60</length>
    <episode-num system = "xmltv_ns">11.1.</episode-num>
    <sub-title>The Lost Child (Part 2 of 2)</sub-title>
    <audio>
      <stereo>Stereo</stereo>
    </audio>
    <video>
      <aspect>16:9</aspect>
    </video>
    <subtitles type = "teletext"/>
    <subtitles type = "onscreen"/>
    <credits>
      <actor>Tom Ward</actor>
      <actor>William Gaminara</actor>
      <actor>Emilia Fox</actor>
      <actor>Penny Layden</actor>
      <actor>Reece Dinsdale</actor>
      <actor>Peter Guinness</actor>
    </credits>
  </programme>
Digiguide:
Code:
DRAMA: Silent Witness
On: BBC 1 North East (101)    
Date: Thursday 30th October 2008 (starting this evening)
Time: 21:00 to 22:00 (1 hour long)

The Lost Child (Part 2 of 2). Series 12, episode 10.
Drama series about a team of forensic pathologists. As the search for Liam continues, Nikki's loyalty towards her former mentor is tested when the allegations of a former student are brought to the surface. Leo and Harry refuse to give up on the search, and they are soon on the trail of a toxic chemical, found in both bodies, which could provide them with Liam's whereabouts.
(Editor's Choice, Stereo, Widescreen, Subtitles, Audio Described)

Starring: Tom Ward, William Gaminara, Emilia Fox, Penny Layden, Reece Dinsdale, Peter Guinness
I hope you can do something with that! Thanks...
__________________
unRAID Server: Intel Core i5 7600K, 16GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x4TB SATA3 Parity Drive, 2x3TB + 1x4TB SATA Array, 1x TBS 6284 PCIe DVB-T2 Quad, 2x TBS 6205 PCIe DVB-T Quad, Cable TV from TBS2603 sat/IP, IPTV via Telly & node-ffmpeg-mpegts-proxy, unRAID 6.6.6, TVheadend for recording back end, OpenDCT, SDEPG, SageTV 9
Clients: 3 Nvidia Shields, 2 Android Miniclients (Amlogic S905X), 3 Win10 Pro PC Clients
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
XMLTVImportPlugin: Demideus Demideus SageTV EPG Service 152 03-13-2018 06:39 AM
Updated XMLTV How To rsagetv99 SageTV EPG Service 37 07-25-2012 12:00 PM
Can't remove XMLTV lineup jhendrix SageTV EPG Service 0 06-15-2007 01:28 PM
XMLTV dual source on same card Black Sky SageTV EPG Service 1 04-10-2006 08:27 AM
Please wait while the channel lineup is downloaded for XMLTV Lineup gafrol SageTV EPG Service 1 01-06-2006 08:08 AM


All times are GMT -6. The time now is 05:54 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.