SageTV Community  

Go Back   SageTV Community > SageTV Products > SageTV Linux > SageTV for unRAID/Docker

Notices

SageTV for unRAID/Docker Discussion related to SageTV for unRAID/Docker. Questions, issues, problems, suggestions, etc. relating to SageTV for unRAID/Docker should be posted here.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-31-2017, 11:14 AM
starfire starfire is offline
Sage Expert
 
Join Date: Mar 2008
Location: England, UK
Posts: 505
DVB-S setup

So,

I had a DVB-S2 card working fine under Windows but really struggling with the Linux version under Docker, when I do a channel scan no channels are found and it immediately quits before trying to even do a scan as far as I can tell.

I believe I needed an adapter1.cfg file:
Code:
#Defined LNB: UNIVERSAL, DBS, STANDARD, ENHANCED, C-BAND, C-MULTI
#you define in format low_frq-high_frq-switch_frq such as "11250000-0-0" for DBS
hard_demulex=0
LNB=UNIVERSAL
sat_no=0
And here is the native.log, I believe it should create the .frq automatically once it scans but what is the .scn file ?

If anyone could give any tips how to configure mu tuner (TBS 8921) I would appreciate it!


Code:
08/31/2017 18:04:58  DVB: create Encoder (Native log:ON EPG log:OFF.)
08/31/2017 18:04:58  DVB: devices /dev/dvb/adapter2/frontend0 /dev/dvb/adapter2/demux0 /dev/dvb/adapter2/dvr0.
08/31/2017 18:04:58  Device configure file "adapter2.cfg" isn't exist
08/31/2017 18:04:58 Create Remuxer
08/31/2017 18:04:58 TS Filter created  ( ver.2.0.9 )
08/31/2017 18:04:58 PSI Filter created  ( ver.2.0.1 )
08/31/2017 18:04:58 PSI format Unknown
08/31/2017 18:04:58 TS Parser is created  version 2.0.4  .
08/31/2017 18:04:58 	Maxium PAT number:6 PMT number:80 Packet length:188
08/31/2017 18:04:58 	PTSFIX threshold:0:0:5.000'000.0
08/31/2017 18:04:58 Open slot 0.
08/31/2017 18:04:58 PS Builder is created  version 2.0.1  ZQ..
08/31/2017 18:04:58 Set default audio language "eng".
08/31/2017 18:04:58  Set capture buffer size(DMX_BUFFER_SIZE):1925120 
08/31/2017 18:04:58  DVB: encoder is created CDev: 0x2b52187c07d0, 0x2b52180a59b0
08/31/2017 18:04:58 QAM Cache is disabled

08/31/2017 18:04:58 Channel is open (ver 3.0.4)

08/31/2017 18:04:58  debugserver.ini is not exist 
08/31/2017 18:04:58  DVB:Open device /dev/dvb/adapter2/frontend0 (ver 2.0.11)
08/31/2017 18:04:58  DVB: SetInput () on /dev/dvb/adapter2/frontend0, country:44 file format:PS (1)
08/31/2017 18:04:58  DVB:tuner name:TurboSight TBS 62x1 DVBT/T2 frontend
08/31/2017 18:04:58  DVB:frq (42000000-1002000000), rate(0-0) cap:0x401bfebf
08/31/2017 18:04:58  DVB:Tuner type:DVB-T
08/31/2017 18:04:58 DVB-T Frequency initialize :0

08/31/2017 18:04:58 Loaded '172' tuning data from 'adapter2-DVB-T.frq'

08/31/2017 18:04:58  CardModelUIDForDevice:Digital TurboSight TBS 62x1 DVBT/T2 frontend 0000:05:00.0 #508/31/2017 18:04:58  DVB: create Encoder (Native log:ON EPG log:OFF.)
08/31/2017 18:04:58  DVB: devices /dev/dvb/adapter4/frontend0 /dev/dvb/adapter4/demux0 /dev/dvb/adapter4/dvr0.
08/31/2017 18:04:58  Device configure file "adapter4.cfg" isn't exist
08/31/2017 18:04:58 Create Remuxer
08/31/2017 18:04:58 TS Filter created  ( ver.2.0.9 )
08/31/2017 18:04:58 PSI Filter created  ( ver.2.0.1 )
08/31/2017 18:04:58 PSI format Unknown
08/31/2017 18:04:58 TS Parser is created  version 2.0.4  .
08/31/2017 18:04:58 	Maxium PAT number:6 PMT number:80 Packet length:188
08/31/2017 18:04:58 	PTSFIX threshold:0:0:5.000'000.0
08/31/2017 18:04:58 Open slot 0.
08/31/2017 18:04:58 PS Builder is created  version 2.0.1  ZQ..
08/31/2017 18:04:58 Set default audio language "eng".
08/31/2017 18:04:58  Set capture buffer size(DMX_BUFFER_SIZE):1925120 
08/31/2017 18:04:58  DVB: encoder is created CDev: 0x2b5218435880, 0x2b52181670b0
08/31/2017 18:04:58 QAM Cache is disabled

08/31/2017 18:04:58 Channel is open (ver 3.0.4)

08/31/2017 18:04:58  debugserver.ini is not exist 
08/31/2017 18:04:58  DVB:Open device /dev/dvb/adapter4/frontend0 (ver 2.0.11)
08/31/2017 18:04:58  DVB: SetInput () on /dev/dvb/adapter4/frontend0, country:44 file format:PS (1)
08/31/2017 18:04:58  DVB:tuner name:TurboSight TBS 62x1 DVBT/T2 frontend
08/31/2017 18:04:58  DVB:frq (42000000-1002000000), rate(0-0) cap:0x401bfebf
08/31/2017 18:04:58  DVB:Tuner type:DVB-T
08/31/2017 18:04:58 DVB-T Frequency initialize :0

08/31/2017 18:04:58 Loaded '172' tuning data from 'adapter4-DVB-T.frq'

08/31/2017 18:04:58  CardModelUIDForDevice:Digital TurboSight TBS 62x1 DVBT/T2 frontend 0000:05:00.008/31/2017 18:04:58  DVB: create Encoder (Native log:ON EPG log:OFF.)
08/31/2017 18:04:58  DVB: devices /dev/dvb/adapter0/frontend0 /dev/dvb/adapter0/demux0 /dev/dvb/adapter0/dvr0.
08/31/2017 18:04:58  Device configure file "adapter0.cfg" isn't exist
08/31/2017 18:04:58 Create Remuxer
08/31/2017 18:04:58 TS Filter created  ( ver.2.0.9 )
08/31/2017 18:04:58 PSI Filter created  ( ver.2.0.1 )
08/31/2017 18:04:58 PSI format Unknown
08/31/2017 18:04:58 TS Parser is created  version 2.0.4  .
08/31/2017 18:04:58 	Maxium PAT number:6 PMT number:80 Packet length:188
08/31/2017 18:04:58 	PTSFIX threshold:0:0:5.000'000.0
08/31/2017 18:04:58 Open slot 0.
08/31/2017 18:04:58 PS Builder is created  version 2.0.1  ZQ..
08/31/2017 18:04:58 Set default audio language "eng".
08/31/2017 18:04:58  Set capture buffer size(DMX_BUFFER_SIZE):1925120 
08/31/2017 18:04:58  DVB: encoder is created CDev: 0x2b5218697d20, 0x2b5218422520
08/31/2017 18:04:58 QAM Cache is disabled

08/31/2017 18:04:58 Channel is open (ver 3.0.4)

08/31/2017 18:04:58  debugserver.ini is not exist 
08/31/2017 18:04:58  DVB:Open device /dev/dvb/adapter0/frontend0 (ver 2.0.11)
08/31/2017 18:04:58  DVB: SetInput () on /dev/dvb/adapter0/frontend0, country:44 file format:PS (1)
08/31/2017 18:04:58  DVB:tuner name:TurboSight TBS 62x1 DVBT/T2 frontend
08/31/2017 18:04:58  DVB:frq (42000000-1002000000), rate(0-0) cap:0x401bfebf
08/31/2017 18:04:58  DVB:Tuner type:DVB-T
08/31/2017 18:04:58 DVB-T Frequency initialize :0

08/31/2017 18:04:58 Loaded '172' tuning data from 'adapter0-DVB-T.frq'

08/31/2017 18:04:58  CardModelUIDForDevice:Digital TurboSight TBS 62x1 DVBT/T2 frontend 0000:05:00.0 #408/31/2017 18:04:58  DVB: create Encoder (Native log:ON EPG log:OFF.)
08/31/2017 18:04:58  DVB: devices /dev/dvb/adapter3/frontend0 /dev/dvb/adapter3/demux0 /dev/dvb/adapter3/dvr0.
08/31/2017 18:04:58  Device configure file "adapter3.cfg" isn't exist
08/31/2017 18:04:58 Create Remuxer
08/31/2017 18:04:58 TS Filter created  ( ver.2.0.9 )
08/31/2017 18:04:58 PSI Filter created  ( ver.2.0.1 )
08/31/2017 18:04:58 PSI format Unknown
08/31/2017 18:04:58 TS Parser is created  version 2.0.4  .
08/31/2017 18:04:58 	Maxium PAT number:6 PMT number:80 Packet length:188
08/31/2017 18:04:58 	PTSFIX threshold:0:0:5.000'000.0
08/31/2017 18:04:58 Open slot 0.
08/31/2017 18:04:58 PS Builder is created  version 2.0.1  ZQ..
08/31/2017 18:04:58 Set default audio language "eng".
08/31/2017 18:04:58  Set capture buffer size(DMX_BUFFER_SIZE):1925120 
08/31/2017 18:04:58  DVB: encoder is created CDev: 0x2b521883f650, 0x2b52187ad7d0
08/31/2017 18:04:58 QAM Cache is disabled

08/31/2017 18:04:58 Channel is open (ver 3.0.4)

08/31/2017 18:04:58  debugserver.ini is not exist 
08/31/2017 18:04:58  DVB:Open device /dev/dvb/adapter3/frontend0 (ver 2.0.11)
08/31/2017 18:04:58  DVB: SetInput () on /dev/dvb/adapter3/frontend0, country:44 file format:PS (1)
08/31/2017 18:04:58  DVB:tuner name:TurboSight TBS 62x1 DVBT/T2 frontend
08/31/2017 18:04:58  DVB:frq (42000000-1002000000), rate(0-0) cap:0x401bfebf
08/31/2017 18:04:58  DVB:Tuner type:DVB-T
08/31/2017 18:04:58 DVB-T Frequency initialize :0

08/31/2017 18:04:58 Loaded '172' tuning data from 'adapter3-DVB-T.frq'

08/31/2017 18:05:27  CardModelUIDForDevice:Digital TurboSight TBS 8921 DVBS/S2 frontend 0000:03:02.208/31/2017 18:05:27  DVB: create Encoder (Native log:ON EPG log:OFF.)
08/31/2017 18:05:27  DVB: devices /dev/dvb/adapter1/frontend0 /dev/dvb/adapter1/demux0 /dev/dvb/adapter1/dvr0.
08/31/2017 18:05:27  Device configure' adapter1.cfg' file was found
08/31/2017 18:05:27  READ: hard_demulex:0
08/31/2017 18:05:27  LNB swich 'UNIVERSAL' found.
08/31/2017 18:05:27  READ: LNB 'UNIVERSAL' OK.
08/31/2017 18:05:27  READ: sat_no:0
08/31/2017 18:05:27 Create Remuxer
08/31/2017 18:05:27 TS Filter created  ( ver.2.0.9 )
08/31/2017 18:05:27 PSI Filter created  ( ver.2.0.1 )
08/31/2017 18:05:27 PSI format Unknown
08/31/2017 18:05:27 TS Parser is created  version 2.0.4  .
08/31/2017 18:05:27 	Maxium PAT number:6 PMT number:80 Packet length:188
08/31/2017 18:05:27 	PTSFIX threshold:0:0:5.000'000.0
08/31/2017 18:05:27 Open slot 0.
08/31/2017 18:05:27 PS Builder is created  version 2.0.1  ZQ..
08/31/2017 18:05:27 Set default audio language "eng".
08/31/2017 18:05:27  Set capture buffer size(DMX_BUFFER_SIZE):1925120 
08/31/2017 18:05:27  DVB: encoder is created CDev: 0x2b51d80026c0, 0x2b51d8007100
08/31/2017 18:05:27 QAM Cache is disabled

08/31/2017 18:05:27 Channel is open (ver 3.0.4)

08/31/2017 18:05:27  debugserver.ini is not exist 
08/31/2017 18:05:27  DVB:Open device /dev/dvb/adapter1/frontend0 (ver 2.0.11)
08/31/2017 18:05:27  DVB: SetInput () on /dev/dvb/adapter1/frontend0, country:44 file format:PS (1)
08/31/2017 18:05:27  DVB:tuner name:TurboSight TBS 8921 DVBS/S2 frontend
08/31/2017 18:05:27  DVB:frq (950000-2150000), rate(1000000-45000000) cap:0x500006ff
08/31/2017 18:05:27  DVB:Tuner type:DVB-S
08/31/2017 18:05:27 Can't open 'adapter1-DVB-S.frq' to load scan data for tuner.

08/31/2017 18:05:27 DVB-S Frequency initialize :0

08/31/2017 18:05:27  DVB: Load tuning frequency data failed (-1)
08/31/2017 18:05:27 Tune channel () 0--1--1 on 'adapter1'. <<=======

08/31/2017 18:05:27  Stop Parser
08/31/2017 18:05:27  Set output format 1, (Disabled)
08/31/2017 18:05:27 DVB:Get tuning Entry :(type:1) major:-1  minor:-1  physical:0 (index:-1)

08/31/2017 18:05:27 DVB: DVB-S Tuning Entry not found.

08/31/2017 18:05:27 Invalid tuning for Tuning DVB-S tune '0'.

08/31/2017 18:05:27 Tune DVB-S freq:0 

08/31/2017 18:05:27  DiSEqc: sat_no:0, vol:18, lo (1)
08/31/2017 18:05:28  DVB-S frq:156500000, 1791401888 symbrate:0 fec-inner:9(255)  pol:81 sat:0  mod:255(0)
08/31/2017 18:05:28  Failed setting front-end properties.(Invalid argument)
08/31/2017 18:05:28  front end status: 0x0.
08/31/2017 18:05:28  DVB: reset video hard demux pid:2000 
08/31/2017 18:05:28  Lock TS channel
08/31/2017 18:05:28 TS Parser Reset
08/31/2017 18:05:28 Tune Channel (slot:0) DVB onid:0 tsid:65535 sid:65535 (ch:1)
08/31/2017 18:05:28  Start Parser
08/31/2017 18:05:31  SetEncoding
08/31/2017 18:05:31  DVB: open file:/unraid/SageTVRecordings/DigitalTurboSightTBS8921DVBSS2frontend000003022DigitalTVTuner-0.mpgbuf  0x2b51d8068990.
08/31/2017 18:05:31  GetBroadcastStandard DVB-S 
08/31/2017 18:05:32  DVB: close file:0x2b51d8068990.
08/31/2017 18:05:42 Tune channel () 0--1--1 on 'adapter1'. <<=======

08/31/2017 18:05:42  Stop Parser
08/31/2017 18:05:42  Set output format 1, (Disabled)
08/31/2017 18:05:42 DVB:Get tuning Entry :(type:1) major:-1  minor:-1  physical:0 (index:-1)

08/31/2017 18:05:42 DVB: DVB-S Tuning Entry not found.

08/31/2017 18:05:42 Invalid tuning for Tuning DVB-S tune '0'.

08/31/2017 18:05:42 Tune DVB-S freq:0 

08/31/2017 18:05:42  DiSEqc: sat_no:0, vol:18, lo (1)
08/31/2017 18:05:43  DVB-S frq:156500000, 1791401888 symbrate:0 fec-inner:9(255)  pol:81 sat:0  mod:255(0)
08/31/2017 18:05:43  Failed setting front-end properties.(Invalid argument)
08/31/2017 18:05:43  front end status: 0x0.
08/31/2017 18:05:44  DVB: reset video hard demux pid:2000 
08/31/2017 18:05:44  Lock TS channel
08/31/2017 18:05:44 TS Parser Reset
08/31/2017 18:05:44 Tune Channel (slot:0) DVB onid:0 tsid:65535 sid:65535 (ch:1)
08/31/2017 18:05:44  Start Parser
08/31/2017 18:05:47  SetEncoding
08/31/2017 18:05:47  DVB: open file:/unraid/SageTVRecordings/DigitalTurboSightTBS8921DVBSS2frontend000003022DigitalTVTuner-0.mpgbuf  0x2b523c0c80c0.
08/31/2017 18:05:47  GetBroadcastStandard DVB-S 
08/31/2017 18:05:47  Scan Channel:0,  contry:, type:DVB-S, tune:0 ...
08/31/2017 18:05:47 Loading predefined freq table PredefinedDVBS.frq for DVB-S in 'United Kingdom-'.

08/31/2017 18:05:47  	country region/provider (sat_no):'United Kingdom' '' ''.

08/31/2017 18:05:47 loaded predefined scan freq data 0 entry (0).

08/31/2017 18:05:47 Can't open 'adapter1-DVB-S.scn' to load scan data for tuner.

08/31/2017 18:05:47 File 'adapter1-DVB-S.frq' isn't exist

08/31/2017 18:05:47  Stop Parser
08/31/2017 18:05:47 Scan returns(1) 

08/31/2017 18:05:47  Scan Channel:0,  contry:United Kingdom-, type:DVB-S, tune:0 ...
08/31/2017 18:05:47 Loading predefined freq table PredefinedDVBS.frq for DVB-S in 'United Kingdom-'.

08/31/2017 18:05:47  	country region/provider (sat_no):'United Kingdom' '' ''.

08/31/2017 18:05:47 loaded predefined scan freq data 0 entry (0).

08/31/2017 18:05:47 Can't open 'adapter1-DVB-S.scn' to load scan data for tuner.

08/31/2017 18:05:47 File 'adapter1-DVB-S.frq' isn't exist

08/31/2017 18:05:47  Stop Parser
08/31/2017 18:05:47 Scan returns(1) 

08/31/2017 18:05:47  Scan Channel:1,  contry:United Kingdom-, type:DVB-S, tune:1 ...
08/31/2017 18:05:47 Scan DVB-S is not initialized

08/31/2017 18:05:47  Stop Parser
08/31/2017 18:05:47 Scan returns(-2) DONE


08/31/2017 18:05:48  Scan Channel:-1,  contry:United Kingdom-, type:DVB-S, tune:-1 ...
08/31/2017 18:05:48  Stop Parser
08/31/2017 18:05:48 Scan returns(0) DONE


08/31/2017 18:05:48  DVB: close file:0x2b523c0c80c0.
__________________
2 X HD300, 2 X HD100 & KVM unRAID Host with SageTV Docker using TBS 6285 Quad DVB-T2 & TBS 6984 Quad DVB-S2 Tuners

Last edited by starfire; 08-31-2017 at 12:22 PM.
Reply With Quote
  #2  
Old 08-31-2017, 12:23 PM
starfire starfire is offline
Sage Expert
 
Join Date: Mar 2008
Location: England, UK
Posts: 505
Well got a bit further and actually got a scan to at least start, then Sage crashes.

I presume people who have DVB-S2 working under Linux are not scanning but using prebuilt .frq files ?
__________________
2 X HD300, 2 X HD100 & KVM unRAID Host with SageTV Docker using TBS 6285 Quad DVB-T2 & TBS 6984 Quad DVB-S2 Tuners
Reply With Quote
  #3  
Old 09-05-2017, 02:07 AM
Fuzzy's Avatar
Fuzzy Fuzzy is offline
SageTVaholic
 
Join Date: Sep 2005
Location: Jurupa Valley, CA
Posts: 9,957
Can you post up some logs of the crash? saget_0.txt, and an hs_err log files generated as well.
__________________
Buy Fuzzy a beer! (Fuzzy likes beer)

unRAID Server: i7-6700, 32GB RAM, Dual 128GB SSD cache and 13TB pool, with SageTVv9, openDCT, Logitech Media Server and Plex Media Server each in Dockers.
Sources: HRHR Prime with Charter CableCard. HDHR-US for OTA.
Primary Client: HD-300 through XBoxOne in Living Room, Samsung HLT-6189S
Other Clients: Mi Box in Master Bedroom, HD-200 in kids room
Reply With Quote
  #4  
Old 09-05-2017, 05:15 AM
starfire starfire is offline
Sage Expert
 
Join Date: Mar 2008
Location: England, UK
Posts: 505
I would, but there are none.

Nothing at all in sagetv_0.txt and no hs_err files.

The only thing you can see is in the docker log:

Main is starting
./startsagecore: line 55: 109 Aborted java -Djava.awt.headless=$HEADLESS $JAVAMEM -XX:+UseAdaptiveSizePolicy -XX:MaxGCPauseMillis=25 -XX:GCTimeRatio=24 $(if [[ $EUID -eq 0 ]]; then echo '-XX:ThreadPriorityPolicy=1'; fi) $JAVAOPTS -cp Sage.jar:JARs/lucene-core-3.6.0.jar:/:$(echo JARs/*.jar | sed 's/ */:/g') sage.Sage 0 0 x "sagetv Sage.properties" 0>&-

and I see in unRAID syslog:

Sep 5 12:13:09 Tower kernel: DVB: adapter 1 frontend 0 frequency 1645719888 out of range (950000..2150000)
Sep 5 12:13:22 Tower kernel: DVB: adapter 1 frontend 0 frequency 1645719888 out of range (950000..2150000)
Sep 5 12:13:24 Tower kernel: DVB: adapter 1 frontend 0 frequency 1645748888 out of range (950000..2150000)
__________________
2 X HD300, 2 X HD100 & KVM unRAID Host with SageTV Docker using TBS 6285 Quad DVB-T2 & TBS 6984 Quad DVB-S2 Tuners

Last edited by starfire; 09-05-2017 at 05:17 AM.
Reply With Quote
  #5  
Old 09-05-2017, 08:22 AM
starfire starfire is offline
Sage Expert
 
Join Date: Mar 2008
Location: England, UK
Posts: 505
OK, so I am not using scan in Sage and just using a prebuilt .frq file.

But, I still cannot tune any channel.

Native.log reports

Code:
09/05/2017 14:50:48 Tune channel (80) 80--1--1 on 'adapter1'. <<=======

09/05/2017 14:50:48  Stop Parser
09/05/2017 14:50:48  Set output format 1, (Disabled)
09/05/2017 14:50:48 DVB:Get tuning Entry :(type:1) major:-1  minor:-1  physical:80 (index:-1)

09/05/2017 14:50:48 DVB-S Freq entry: index:80 onid:2 tsid:2050 sid:6940 frq:10847000 ctr:1 (skip:0) v_pid:0 a_pid:0 name:BBC.

09/05/2017 14:50:48  DiSEqc: sat_no:0, vol:13, lo (0)
09/05/2017 14:50:49  DVB-S frq:10847000, 1645748888 symbrate:23000000 fec-inner:2(2)  pol:2 sat:0  mod:32(0)
09/05/2017 14:50:49  Failed setting front-end properties.(Invalid argument)
09/05/2017 14:50:49  front end status: 0x0.
09/05/2017 14:50:49  DVB: reset video hard demux pid:2000 
09/05/2017 14:50:49 Tuning DVB-S channel '80' BBC (freq:10847000) successed.

09/05/2017 14:50:49  Lock TS channel
09/05/2017 14:50:49 TS Parser Reset
09/05/2017 14:50:49 Tune Channel (slot:0) DVB onid:2 tsid:2050 sid:6940 (ch:0)
09/05/2017 14:50:49  Start Parser
09/05/2017 14:50:51  SetEncoding
09/05/2017 14:50:51  DVB: open file:/unraid/SageTVRecordings/DigitalTurboSightTBS8921DVBSS2frontend000003022DigitalTVTuner-0.mpgbuf  0x2b6ad0013580.
09/05/2017 14:50:51  GetBroadcastStandard DVB-S
and at the same time in the syslog we get an error from the driver
Code:
Sep  5 14:50:49 Tower kernel: DVB: adapter 1 frontend 0 frequency 1645748888 out of range (950000..2150000)

Now, channel 80 is defined as:

Code:
CH:80	onid:2	tsid:2050	sid:6940	frq:10847000	rate:23000	mod:32	pol:2	fec_rate_in:2	sat:0	ctrl:1	#:BBC Two HD
So, clearly Sage has read the frq of 10847000 but it seems to be using an ifreq that is clearly wrong:

Code:
09/05/2017 14:50:49  DVB-S frq:10847000, 1645748888 symbrate:23000000 fec-inner:2(2)  pol:2 sat:0  mod:32(0)

looking at the source code sagetv/native/so/DVBCapture2.0/sage_DVBCaptureDevice.c I see:

Code:
unsigned long freq_offset = (hiband ? CDev->lnb.high_val : CDev->lnb.low_val) * 1000;
			ifreq = abs(freq - freq_offset);

I'm not a C guy, but seems to be some check on high or low LNB values which I presume relate to LOF1, LOF2 & LOFSW ?

I have a .lnb file
Code:
#LNB setup for Digital TurboSight TBS 8921 DVBS/S2 frontend 0000:03:02.2
sat_no:0
sat_name:"Astra (28.2)"
LNB=9750-10600-11700 pos:None opt:None

Can anyone help?....
__________________
2 X HD300, 2 X HD100 & KVM unRAID Host with SageTV Docker using TBS 6285 Quad DVB-T2 & TBS 6984 Quad DVB-S2 Tuners
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to setup A DVR with WHS! Lahr SageTV Software 11 12-26-2007 02:37 PM
Setup Freezes during source setup Rob SageTV Software 14 08-16-2007 05:17 PM
Source Setup PVR150 Setup 5 : Tuning Plugin MrD SageTV Linux 9 09-23-2006 10:52 AM
Help with setup GeoffQ SageTV Software 2 12-13-2005 01:57 PM
I can't setup JB23 SageTV Software 2 08-29-2005 02:04 PM


All times are GMT -6. The time now is 04:00 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.