SageTV Community  

Go Back   SageTV Community > Information & Announcements > SageTV Downloads & Instructions

Notices

SageTV Downloads & Instructions This forum is for discussions containing Downloads and Instructions related to the Open Source version of SageTV. Please do not post questions in this forum.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-19-2018, 09:21 PM
jusjoken jusjoken is offline
Sage Icon
 
Join Date: Dec 2005
Location: Minneapolis MN
Posts: 2,176
Windows 64 bit Installer news

NOTE The BETA has ended and you should now use the release version of SageTV 64 bit edition for Windows****

Release version available here....

Thanks to WNJJ for all the work on getting the 64 bit changes completed to make this option available to SageTV users.

The 64bit version has been reported as fairly stable and should be ready for production use soon (I am sure a few are already there). There are only minor fixes in this release.
This version of the installer has some larger changes so please report any issues during testing so we can call this a production release.


There are a few functionality changes included in this release - see list below

Please use this forum to discuss issues with both the installer as well as the 64 bit and 32 bit versions of the SageTV software.

SageTV Version is 9.2.0
Installer Version is 1.104

x64 Downloads
x86 Downloads
Note: the x86 version contains code that is now being compiled with each release that was previously included from the original Open Source release. Testing of the x86 version would be appreciated.
Notes:
  • If you have previously installed a prior BETA version you may need to perform an uninstall of the prior version before installing a newer BETA
  • Please BACKUP your existing SageTV folder PRIOR to installing and testing this software
  • 64 bit install is a NEW product and will NOT perform an upgrade of x86 versions
  • Default install folder will be "Program Files" rather than "Program Files(x86)
  • Installation into the same folder as an x86 (32bit) version needs testing. It should work but please do NOT do so into your production Sage folder.
  • New: Installer will now default the install folder to the previous install location for upgrades - the 64 and 32 bit installs are handled separately for this
  • You should be able to have BOTH the 32 bit and 64 bit version installed on the same computer under different folders. They cannot/should not be run at the same time for numerous reasons
  • There will be a new SageTV64 Service entry that should operated independently of the 32 bit one
  • If you copy your Wiz.bin and properties to your new installation, keep in mind that the .properties will need to be edited manually for the different paths
  • Java is NOT embedded in the installer any longer. If Java (x64) 1.7 or higher is not found on the system then the installer will download Java 1.8 from BinTray and install it. If you want a different x64 Java version then please install it prior to running the installer.
  • AC3Filter is NO LONGER part of the installer - removed 12/01/2018 installer version 1.102
  • New: LAV Filters is now offered as part of the 32 bit and 64 bit installers.
  • New: The installer has options for setting "EnableSageTVStreamDemux" and AlwaysSwapForAC3Filter
  • Registry entries for the 64 bit install follow the windows standard so will be in a new location than the 32 bit ones (no longer under WOW6432node)
  • New: The installer has an option to install USB_UIRT support in the 64 bit version
  • HDHR fresh installs will not find the 64 bit install. As a work around you need to install the 32 bit version somewhere else, configure HDHR first time, and then you could uninstall the 32 bit version....hopefully we find a better solution.

9.2.0 Change Log:
  • Reworked for Windows 64-bit version
  • Added ExeMultiTunerPlugin project
  • Added USB-UIRT transmit project
  • Added HCWIRBlaster project
  • Changed defaults: video/audio decoder to 'Default', video/dvd_video renderer to 'EVR'
  • Updates to whitelist LAV Filters
  • Updated STV to remove prompt on new install for the weather underground plugin
  • Fix: Sage-x64 hang due to CableCARD tuners (Windows)
  • Fix: Add support for HVR-4400 and other 885 variants (Windows)

Note: all 6 of the installers were submitted to Microsoft and have had the false positive virus message removed for them. You may need to update your virus definitions if you receive a false positive. Here is Microsofts response...

Code:
We have removed the detection. Please follow the steps below to clear cached detection and obtain the latest malware definitions.

1. Open command prompt as administrator and change directory to c:\Program Files\Windows Defender 
2. Run ďMpCmdRun.exe -removedefinitions -dynamicsignaturesĒ

Alternatively, the latest definition is available for download here: https://www.microsoft.com/en-us/wdsi/definitions
k

Last edited by jusjoken; 03-24-2019 at 04:05 PM.
Reply With Quote
  #2  
Old 11-19-2018, 09:28 PM
jusjoken jusjoken is offline
Sage Icon
 
Join Date: Dec 2005
Location: Minneapolis MN
Posts: 2,176
Installer bloat

I am considering removing at least some of the redistibutables that previously were embedded inside the installer executable...namely java. I plan to ensure at least java 7 is installed but if 7 or newer is not found then java 8 will download from bintray and install. The redist of java 8 is 200MB (7 was 30) so excluding it and downloading on demand shrinks the installer.

Thoughts?

Should i do this for Directx9, VC10 or VC14, AC3 filters ?

k

Last edited by jusjoken; 11-20-2018 at 08:35 AM.
Reply With Quote
  #3  
Old 11-19-2018, 11:33 PM
wnjj wnjj is online now
Sage Icon
 
Join Date: Jan 2009
Posts: 1,074
Quote:
Originally Posted by jusjoken View Post
I am considering removing at least some of the redistibutables that previously were embedded inside the installer executable...namely java. I plan to ensure at least java 7 is installed but if 7 or newer is not found the java 8 will download from bintray and install. The redist of java 8 is 200MB (7 was 30) so excluding it and downloading on demand shrinks the installer.

Thoughts?

Should i do this for Directx9, VC10 or VC14, AC3 filters ?

k
I'd say non-embedded is fine since it makes the installer lightweight. To complement that, I'd suggest a README file that contains the exact download paths to either the 3rd party download sites or bintray for anything not embedded. That way someone could grab everything needed up front for an install which could be done even while offline.
Reply With Quote
  #4  
Old 11-20-2018, 07:49 AM
Tiki's Avatar
Tiki Tiki is offline
Sage Icon
 
Join Date: Feb 2005
Location: Southwest Florida, USA
Posts: 1,811
Quote:
Originally Posted by wnjj View Post
I'd say non-embedded is fine since it makes the installer lightweight. To complement that, I'd suggest a README file that contains the exact download paths to either the 3rd party download sites or bintray for anything not embedded. That way someone could grab everything needed up front for an install which could be done even while offline.
I would say itís OK as long as it automatically downloads the dependencies on-demand as needed. Most Windows users are not accustomed to needing to check a readme file and manually download and install other dependencies.

Having a light weight installer is nice (faster to download and takes less storage space), but most people arenít downloading it very often. Also for people who are most likely going to be recording TBís of stuff, a few hundred MB is almost nothing (though it could add up if you save copies of every version).
__________________
Server: Athlon II X4 630 CPU, Gigabyte MA770T-UD3P (AM3) Motherboard, VisionTek Radeon HD4670 PCIe w/ Component output to 50" CRT Rear-Projection HDTV (Mitsubishi), Win7-64Bit (Home Premium), 4GB RAM
Capture Devices (8 tuners): Colossus (x1), HD-PVR (x1), HDHR Prime (x2)
,USBUIRT (multi-zone)
Source:
Comcast Cable
Primary Client: Server Other Clients: (1) HD200, (1) HD300
Retired Equipment: MediaMVP, PVR150 (x2), PVR150MCE,
HDHR, HVR-2250
Reply With Quote
  #5  
Old 11-20-2018, 08:34 AM
jusjoken jusjoken is offline
Sage Icon
 
Join Date: Dec 2005
Location: Minneapolis MN
Posts: 2,176
Quote:
Originally Posted by Tiki View Post
I would say itís OK as long as it automatically downloads the dependencies on-demand as needed. Most Windows users are not accustomed to needing to check a readme file and manually download and install other dependencies.

Having a light weight installer is nice (faster to download and takes less storage space), but most people arenít downloading it very often. Also for people who are most likely going to be recording TBís of stuff, a few hundred MB is almost nothing (though it could add up if you save copies of every version).
Absolutely the download is automatic as long as there is an internet connection. Manual download of dependencies would only be needed for an offline install which is an unlikely case IMHO. And of course in an upgrade where the dependencies are already installed then no download is needed.

k
Reply With Quote
  #6  
Old 11-20-2018, 09:24 AM
Carlton Bale Carlton Bale is offline
Sage Advanced User
 
Join Date: Sep 2010
Location: Indianapolis, Indiana, USA
Posts: 101
Quote:
Originally Posted by Tiki View Post
I would say itís OK as long as it automatically downloads the dependencies on-demand as needed... For people who are most likely going to be recording TBís of stuff, a few hundred MB is almost nothing.
Unless you're paying for server bandwidth, I don't the size of the installer is a significant concern. I'd rather have an installer that I know is going to work every time. There's nothing more frustrating than not being able to install because a different server is down or the path has changed. Also, having as few clicks as possible to install is desirable.
Reply With Quote
  #7  
Old 11-20-2018, 09:53 AM
wnjj wnjj is online now
Sage Icon
 
Join Date: Jan 2009
Posts: 1,074
Quote:
Originally Posted by Carlton Bale View Post
Unless you're paying for server bandwidth, I don't the size of the installer is a significant concern. I'd rather have an installer that I know is going to work every time. There's nothing more frustrating than not being able to install because a different server is down or the path has changed. Also, having as few clicks as possible to install is desirable.
The dependencies are on the same server as the installer however I suppose the server could go down after you have already grabbed the installer but before you ran it.

In any case itís the same number of clicks. Itís just a matter of whether the installer continues to download components when itís run or if theyíre bundled up front.
Reply With Quote
  #8  
Old 12-02-2018, 09:03 AM
SHS's Avatar
SHS SHS is offline
Moderator
 
Join Date: Mar 2003
Location: Vinita, Oklahoma
Posts: 4,445
Quote:
Originally Posted by jusjoken View Post
I am considering removing at least some of the redistibutables that previously were embedded inside the installer executable...namely java. I plan to ensure at least java 7 is installed but if 7 or newer is not found then java 8 will download from bintray and install. The redist of java 8 is 200MB (7 was 30) so excluding it and downloading on demand shrinks the installer.

Thoughts?

Should i do this for Directx9, VC10 or VC14, AC3 filters ?

k
I see no point in having the AC3 filter
Yes the LAV Filters
Yes the Visual C++ Redistributable Packages install run-time components should also be included for Windows 7 on up.
Reply With Quote
  #9  
Old 12-02-2018, 09:15 AM
KryptoNyte's Avatar
KryptoNyte KryptoNyte is offline
Sage Icon
 
Join Date: Dec 2006
Posts: 2,169
I will be running this new installation in either January or February, right when the cable company decides to omit my already ridiculous "introductory" rate ... again. I'm sick of that yearly battle, and with 64 bit Sage, an antenna, and the HDHomerun Premium TV service (with a Quatro device), I finally have a real exit. I almost look forward to that phone call early this next year.

Thanks again for bringing SageTV into the 64 bit era, it's been a long time coming.
Reply With Quote
  #10  
Old 12-02-2018, 09:45 AM
jusjoken jusjoken is offline
Sage Icon
 
Join Date: Dec 2005
Location: Minneapolis MN
Posts: 2,176
Quote:
Originally Posted by SHS View Post
I see no point in having the AC3 filter
Yes the LAV Filters
Yes the Visual C++ Redistributable Packages install run-time components should also be included for Windows 7 on up.
All required visual c++ redistributables and directx9 are included in the installer.

I may remove the AC3Filter as i believe it is causing the false positive malware results but i will test that.

I would also appreciate feedback on if we remove AC3 what other changes should be made to the code or registry etc.

As for LAV the same questions for those that use these...what code or registry change should be made to include these more seamless.

k
Reply With Quote
  #11  
Old 12-02-2018, 10:32 AM
SHS's Avatar
SHS SHS is offline
Moderator
 
Join Date: Mar 2003
Location: Vinita, Oklahoma
Posts: 4,445
Quote:
Originally Posted by jusjoken View Post
I may remove the AC3Filter as i believe it is causing the false positive malware results but i will test that.
I don't think that causing it as SageTV Placeshifter doesn't come with it I think it some else more like the lack of digital signing certificate

Also being that you the developer maybe this will help
https://www.microsoft.com/en-us/wdsi/filesubmission

Last edited by SHS; 12-02-2018 at 10:44 AM.
Reply With Quote
  #12  
Old 12-02-2018, 10:54 AM
jusjoken jusjoken is offline
Sage Icon
 
Join Date: Dec 2005
Location: Minneapolis MN
Posts: 2,176
Quote:
Originally Posted by SHS View Post
I don't think that causing it as SageTV Placeshifter doesn't come with it I think it some else more like the lack of digital signing certificate

Also being that you the developer maybe this will help
https://www.microsoft.com/en-us/wdsi/filesubmission
I tried that but there is a 50mb limit. is the placeshifter giving you the same thing as it was not for me.

k
Reply With Quote
  #13  
Old 12-02-2018, 08:51 AM
graywolf's Avatar
graywolf graywolf is offline
Sage Icon
 
Join Date: Oct 2009
Location: NC
Posts: 1,187
Also, maybe someone could Sticky this?
Or are you waiting until out of Beta to do so?
Reply With Quote
  #14  
Old 12-02-2018, 09:40 AM
jusjoken jusjoken is offline
Sage Icon
 
Join Date: Dec 2005
Location: Minneapolis MN
Posts: 2,176
Quote:
Originally Posted by graywolf View Post
Also, maybe someone could Sticky this?
Or are you waiting until out of Beta to do so?
When we are out of beta and fix what is found then the current sticky one will point to all available versions including the 64 bit ones.

k
Reply With Quote
  #15  
Old 12-02-2018, 04:19 PM
jt4242 jt4242 is offline
Sage Advanced User
 
Join Date: Dec 2009
Location: Montreal, Canada
Posts: 157
So great to see this up!!

I started the install but get stuck at Select Remote Control - when I choose USB-UIRT Receiver + any remote, I get the message "Failled setting the Infrared Receiver Port! Please ensure that the device is connected"

Has anyone got the usb-uirt working?
Reply With Quote
  #16  
Old 12-02-2018, 05:42 PM
SHS's Avatar
SHS SHS is offline
Moderator
 
Join Date: Mar 2003
Location: Vinita, Oklahoma
Posts: 4,445
Quote:
Originally Posted by jt4242 View Post
So great to see this up!!

I started the install but get stuck at Select Remote Control - when I choose USB-UIRT Receiver + any remote, I get the message "Failled setting the Infrared Receiver Port! Please ensure that the device is connected"

Has anyone got the usb-uirt working?
Mine works but I only edited my Sage.properties
I didn't do a new install
Reply With Quote
  #17  
Old 12-02-2018, 05:55 PM
jt4242 jt4242 is offline
Sage Advanced User
 
Join Date: Dec 2009
Location: Montreal, Canada
Posts: 157
You installed the x64 version though right? and then copied over your sage.properties from your 32bit version? then what did you edit in sage.properties besides the paths?
Reply With Quote
  #18  
Old 12-02-2018, 06:01 PM
SHS's Avatar
SHS SHS is offline
Moderator
 
Join Date: Mar 2003
Location: Vinita, Oklahoma
Posts: 4,445
The first it Windows Defender is saying the download are unsafe on all of SageTV 64bit files and even the 32 files
There Photo when this all malware results start with SageTV 9.1.10
Attached Images
File Type: jpg sagetv.jpg (305.9 KB, 89 views)

Last edited by SHS; 12-02-2018 at 06:18 PM.
Reply With Quote
  #19  
Old 12-02-2018, 06:34 PM
jusjoken jusjoken is offline
Sage Icon
 
Join Date: Dec 2005
Location: Minneapolis MN
Posts: 2,176
Updated installer posted to remove AC3Filter

By popular demand I have removed the AC3Filter from the installer. The first post has been updated with new links for all but Placeshifter which has never contained AC3Filter.

k
Reply With Quote
  #20  
Old 12-10-2018, 10:13 AM
jusjoken jusjoken is offline
Sage Icon
 
Join Date: Dec 2005
Location: Minneapolis MN
Posts: 2,176
Updated beta x64 version posted

The first post has been updated with new links for Server and Client that include...
  • Defaults for clean installs suggested by SHS for default video/audio settings
  • Fixed StrmDeMux
  • Crash fixed in DShowCapture.dll

If you have previously installed a prior BETA version you may need to perform an uninstall of the prior version before installing a newer BETA

k
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Windows Installer jusjoken SageTV Downloads & Instructions 481 09-22-2019 08:39 AM
Windows Installer Update? JrClocker SageTV Github Development 2 07-02-2016 08:48 PM
Does Windows Installer work on WHS emotionnotion SageTV Github Development 7 05-20-2016 07:55 AM
problems with windows installer Galaxysurfer SageTV Github Development 2 04-15-2016 05:41 AM
Any news on the Windows installer? Damstas SageTV Github Development 2 09-03-2015 10:09 AM


All times are GMT -6. The time now is 09:40 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.