|
|
|||||||
| SageTV Software Discussion related to the SageTV application produced by SageTV. Questions, issues, problems, suggestions, etc. relating to the SageTV software application should be posted here. (Check the descriptions of the other forums; all hardware related questions go in the Hardware Support forum, etc. And, post in the customizations forum instead if any customizations are active.) |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#21
08-25-2004, 04:44 PM
|
|||
|
|||
|
I am not currently using a USB UIRT but you can use the zones feature of the USB UIRT
and have the cable right in front of the DirecTV box with the IR reciever pointed outward so you can use a remote with it I know you will need to buy another cable to attach to the USB UIRT but it should be fairly cheap not 50 dollars like the USB UIRT and you can get a free version of girder http://translate.google.com/translat...8%26oe%3DUTF-8 it is legal maybe some one can give a link for the cable to attach to the USB UIRT 
|
|
#22
08-26-2004, 09:35 AM
|
||||
|
||||
|
Is this the extra cable "an IR Blaster"?
http://www.bluedo.com/showimage.shtml?IR-Blaster
__________________
OS: XP Pro SP2 Case: Ahanix D.Vine 4 with Zalman ZM300B PSU Case fans: 2 x SilenX 60mm Mobo: Intel D865PERLL CPU: P4/3.0EGHz 800M 478P/1MB HT CPU cooler: ZALMAN CNPS7000A-CU RAM: 512MB Corsair XMS Extreme DDR400 Video: Sapphire ATI Radeon 9600 256MB 128bit 8XAGP Tuner: Hauppage PVR-250MCE HD: Seagate 7200 200GB, Maxtor USB2 120GB Optical: STB: DishNetwork VIP211 TV: Sony WEGA KV-36FS100 (s-video) Apps: SageTV 4.0.0.56 w. Hotspot JVM 1.5.0_02, Remote: MX-500 with USB-UIRT and Girder
|
|
#23
09-03-2004, 07:19 AM
|
||||
|
||||
|
FYI, as I expcted my serial port was bad or had unresoolvable conflicts, so I got a USB-Serial cable and used that instead to connect to the low speed data cable. Works great and much more reliable/faster than changing channels with the USB-UIRT.
__________________
OS: XP Pro SP2 Case: Ahanix D.Vine 4 with Zalman ZM300B PSU Case fans: 2 x SilenX 60mm Mobo: Intel D865PERLL CPU: P4/3.0EGHz 800M 478P/1MB HT CPU cooler: ZALMAN CNPS7000A-CU RAM: 512MB Corsair XMS Extreme DDR400 Video: Sapphire ATI Radeon 9600 256MB 128bit 8XAGP Tuner: Hauppage PVR-250MCE HD: Seagate 7200 200GB, Maxtor USB2 120GB Optical: STB: DishNetwork VIP211 TV: Sony WEGA KV-36FS100 (s-video) Apps: SageTV 4.0.0.56 w. Hotspot JVM 1.5.0_02, Remote: MX-500 with USB-UIRT and Girder
|
|
#24
09-23-2004, 08:03 AM
|
||||
|
||||
|
Sorry for the long post.
Going nuts here. I have had Sage working almost perfectly for about 8 months a few hecups but nothing real bad. One day I notice Sage working real slow so I reboot the pc and restart Sage to a black screen. Tried a few more times to no aveal. So I reinstalled Sage. I would get in up a working for a day and then one of my pvr 250 decided not to record just a black picture no movie or sound. I would tinker with it and get it working again only to have the sound not work on one of the cards had picture but no sound. Decided to reinstal sage again. Now I have now sound on one card and cannot change channels on any on my 2 pvr250s they just change channels between the two cards if one is on channel 2 and one is on channel 4 I go between 2 and 4 one card has sound one doesnt. I have tried to reinstall sage. I dont think it is a driver issue since it has been working for months now and I did not change anything before this had happen. I have tried the above, about turning off the STB box while connecting to sage nothing happen. Wife is getting pretty annoyed here missing here soap opera.
__________________
Windows XP, Asus A7N8X Deluxe, 2.1 ghz AMD, ATI Radeon 9800 Pro, 512 MB Ram, 680Gig HD, 2 pv2 250, 2 media MVP's
|
|
#25
09-23-2004, 01:09 PM
|
|||
|
|||
|
you need to reset the STB not just turn it off
remove the power cord to the STB try removing the card in the back of the STB while it is on
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
