|
SageTV Software Discussion related to the SageTV application produced by SageTV. Questions, issues, problems, suggestions, etc. relating to the SageTV software application should be posted here. (Check the descriptions of the other forums; all hardware related questions go in the Hardware Support forum, etc. And, post in the customizations forum instead if any customizations are active.) |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Specifying which Input to use
Howdy,
I have a PVR-150 MCE card which has Coax, S-Video and RCA inputs. Most of the things I record are on the standard cable channels so I have a cable input going into the Coax jack and Sage tunes in the program and records it and everything is great. However every so often I want to record somethinf from one of the DIgital cable channels which have to go through the cable box first. So I have the S-Video out from the cable box going into the S-Video port on the 150 card. Of course the normal channels are available on the cable as well. So, if I'm recording something on a normal channel, how do I tell Sage to use the Coax Input and not the S-Video input? Only thing I came up with was to delete all the normal channel numbers from the S-Video input settings in the channel setup wizard. Will that then tell Sage to use COax for 1-99 and S-Video for 99-200? Just don't want it to try to use the S-Video port for a normal channel as it will just record whatever I'm watching on the cable box. Does that make sense? Thanks. |
#2
|
|||
|
|||
27 views and no responses? Does that mean it's not possible to specify which input to use? I thought I was just missing something....
|
#3
|
||||
|
||||
It has been talked about in the past... essentially you have to configure each source on the same tuner to use different providers so they each have different channel lineups w/no overlapping channels. After that, SageTV automatically knows which input to record from.
- Andy
__________________
SageTV Open Source v9 is available. - Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1. - Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus - HD Extenders: A) FAQs B) URC MX-700 remote setup Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request. |
#4
|
|||
|
|||
Well I guess that's basically what I did. I chose Time Warner for my coax line and Time Warner Digital for the S-Video line.
Now all the normal channels are included in the Digital lineup so I then had to go into the Digital setup and disable all the normal channels. That way i figure if I pick a normal channel it will default to the Coax and if I pick a higher up channel it will default to the S-Video. We'll see what happens. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|