![]() |
|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
![]() |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Laptop hardware
I've just received a nice 300GB hard drive for my laptop, and I'm interested in setting up a PVR. Lots of software and hardware options, but I am limited to USB 2.0 or firewire connectivity for the tuner hardware. Any suggestions?
I'm looking at the Siig AVTuner Pro, but can't find any documentation that it would work with SageTV. |
#2
|
||||
|
||||
My Hauppauge PVR-USB2 tuners work well.
- Andy
__________________
SageTV Open Source v9 is available. - Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1. - Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus - HD Extenders: A) FAQs B) URC MX-700 remote setup Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request. |
#3
|
|||
|
|||
I use a Hauppauge WinTV PVR2 USB2 and a Diamond Xtremetv PVR500 with my laptop.
I find that, for travelling, the PVR600 is a better unit... doesn't need an external power supply (although it does come with a usb->power cable in case the laptop doesn't provide enough power over the units USB interface) and has a smaller (metal) case. Only problem - both units are based on the same hardware, and the drivers conflict, so you can't run both at the same time without a lot of fighting with the drivers. Stay away from the "cheap" units (like the MSI VoX)... they are software encoders and use a lot of system resources. |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|