|
SageTV Software Discussion related to the SageTV application produced by SageTV. Questions, issues, problems, suggestions, etc. relating to the SageTV software application should be posted here. (Check the descriptions of the other forums; all hardware related questions go in the Hardware Support forum, etc. And, post in the customizations forum instead if any customizations are active.) |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
Replacing Tuner Cards
I currently have a PVR-150 and a PVR-350 installed, different STB and channel lineup. If I remove these and add a PVR-500 (using composite inputs), and then apply the appropriate lineup to each tuner, will Sage remember the channel mappings/physical/logical channels for each lineup? Or will I have to start all over again?
__________________
unRAID Server: Intel Core i5 7600K, 48GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x10TB SATA3 Parity Drive, 3x8TB SATA Array, 1x hdHomeRun DVB-T2 Quattro, IPTV via xTeVe, unRAID 6.8.3, tvHeadEnd for recording back end, Emby Clients: 3 Nvidia Shields, 3 FireTV, 3 Win10 Pro PC Clients |
#2
|
||||
|
||||
If you remove the sources before you put the 500 in, then yes, it will lose them. But, I think you can simply not remove the sources (even if you take the cards out?) setup the 500, and then remove the 150/350 sources and you won't have to muck with your lineups.
|
#3
|
||||
|
||||
Thanks. I think I'll take a full image before trying!
__________________
unRAID Server: Intel Core i5 7600K, 48GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x10TB SATA3 Parity Drive, 3x8TB SATA Array, 1x hdHomeRun DVB-T2 Quattro, IPTV via xTeVe, unRAID 6.8.3, tvHeadEnd for recording back end, Emby Clients: 3 Nvidia Shields, 3 FireTV, 3 Win10 Pro PC Clients |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|