2 Dual Tuner PVR 500's Setup in Sage

[jredwine2857]

I am having problems getting my second PVR500 to work properly. I am running svid into it for both d11-500 STB's. (I have the AV Addin, so I have 2) Is there a trick I am missing? It seems the #3 tuner should use S-video and #4 tuner shoule use S-Video_2 since it is running on the Addin card. Just my assumption.

Below is he config of my server:



Hauppauge WinTV PVR PCI II Capture – Svideo Input from D11-500 (Works great)

Hauppauge WinTV PVR PCI II Capture #2 – RF Input on channel 3 from D11-500 (works great)

Hauppauge WinTV PVR PCI II Capture #3 – Using Svideo I get the input from the SVID connected to the AV Addin card??

Hauppauge WinTV PVR PCI II Capture #4 – I have tried both svideo and Svideo_2 and get nothing at all (just the red screen as though no input is detected.)



I am running Sage 6.0.15 beta. WinTV2000 picks this up correctly though. (ie. I have installed Wintv and selected svid and it pulls the input from svid input on the card just like it should.)


Any help is appreciated!

[BobPhoenix]

FYI don't know if this will help but here is my arrangement of tuners on my Server:

Hauppauge WinTV PVR PCI II Capture - PVR-250
Hauppauge WinTV PVR PCI II Capture #2 - PVR-500 tuner 1 card 1
Hauppauge WinTV PVR PCI II Capture #3 - PVR-500 tuner 1 card 2
Hauppauge WinTV PVR PCI II Capture #4 - PVR-500 tuner 2 card 1
Hauppauge WinTV PVR PCI II Capture #5 - PVR-500 tuner 2 card 2

So are you really sure that both tuners on one of your cards are consecutive in the SageTV numbering scheme?

BobP.

[jredwine2857]

Bob..Thanks for this. I am going to check it now. I bet you are on to something...

[jredwine2857]

BobP...Thanks for the info. You nailed it. I had the order incorrect.

All 4 recievers are working!!!

Thanks again.