|
|
|||||||
| Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
01-21-2007, 04:30 PM
|
|||
|
|||
|
No sound on one station-Hauppauge PVR150
I thought this was strange, but I thought maybe someone had experienced this at some point and had a fix.
I get sound on all but two of my cable stations. The main station I don't get sound on is Fox, WYZZ. I get video, but no sound in LiveTV or when recording anything on this station. When I connect the cable directly to the TV, I get picture and sound. My guess is there is something incompatible with the PVR150 card and the Fox broadcast signal. I sent a message to Hauppauge tech support in hopes for an answer, but I'm hoping someone here has also seen this happen. This also happens when viewing TV through WinTV2000 and Descaler, so I know it's not a SageTV problem. I have the latest PVR150 drivers loaded. I have SageTV5.0.4 installed. 
|
|
#2
01-22-2007, 09:22 AM
|
|||
|
|||
|
This used to be a problem with drivers from Hauppauge. I would ensure you have the latest, and if you do, you might consider rolling back one version. I don't have PVR-150s, but the same issue affected PVR-500s as well. They use the same driver base.
B
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
