QAM Support using WinTV-HVR-1600

[SHS]

Oh I see they posted 3.4D1 4 day later after I posted 3.4.25155 but the one I posted is the Full CD.

[SHS]

SubaruWRX be sure check all your channel

[SubaruWRX]

Originally Posted by SHS

SubaruWRX be sure check all your channel

Why do you say that?

most of the rest seem to be SD with some DT channnels mixed in as well.. however it's putting a hurting on my CPU... I hope it runs better on the Core 2 Duo I will get next month...

[SHS]

Becuases of that screenshot you posted if it only a few channel then there nothing can about it.
Besure to run Hauppauge Primary Tool and change the overlay mode something that helps.

[SubaruWRX]

Originally Posted by SHS

Becuases of that screenshot you posted if it only a few channel then there nothing can about it.
Besure to run Hauppauge Primary Tool and change the overlay mode something that helps.

All of the HD stations capture like that for some reason..

[SHS]

I ask Hauppauge about it SubaruWRX
who your cable service is it Cablevision

[SubaruWRX]

Originally Posted by SHS

I ask Hauppauge about it SubaruWRX
who your cable service is it Cablevision

yes Cablevision is my provider.. Hauppauge should know about them since the HQ is not too far from them.

[SHS]

That dosen't also mean any thing

[SubaruWRX]

Originally Posted by SHS

That dosen't also mean any thing

I guess I can't make a funny

I get a good signal level on all the channels.. you can always tell when your going from an SD QAM channel to an HD channel as the channel changing speed will go up or down.

[SubaruWRX]

Interesting.. out of 5 or so HD channels I can only get one good HD capture out of the signal.. the rest of them are all twisted looking messed up pictures.



and here is the bad one

[Humanzee]

what broadcast standard is 1934 x 1088? Thats above 1080p

[SubaruWRX]

Originally Posted by Humanzee

what broadcast standard is 1934 x 1088? Thats above 1080p

no clue.. I had WinTv capture the size of the video of the source.

[pezgarden]

Hello!

The main reason I got the 1600 was to get QAM. I have an older system Dell P4 2.4 1 G ram. At first I was under thew original XP Home. I could scan Analog cable from Cox. Sometimes with the latest Driver I could get QAM HD NBC, ABC bout none of the regular free Network HD.

I wanted to start of clean. I set up an array and installed a virgin XP Pro with all updates. Guess what? Now after installing, It asks to scan for channels and I get 0 analog found. You can guess I get no QAM either.

After installing some other MP2 filters (Intervideo and Cyberlink) WinTV still can't scan any channels but Sage gets all my analog.

I even went back to the pre QAM drivers that cam with the card and nothing scans. So I do hope Sage supports QAM because WinTV doesn't seem to be an option on my system.

Any thoughts?

JC

[kingdeuceoff]

Hey Guys.....just need to verify here....

YOU GOT THIS TO WORK ?

I have been trying for days....doing the QAM scan now....looks like it will be doing it all night.

Also, Any support outside of wintv?

[kingdeuceoff]

Originally Posted by kingdeuceoff

Hey Guys.....just need to verify here....

YOU GOT THIS TO WORK ?

I have been trying for days....doing the QAM scan now....looks like it will be doing it all night.

Also, Any support outside of wintv?

did not work...didn't pick up a single QAM channel.

I'm on comcast cable in wilmington,DE if anyone is searching for results.

[scavenge]

It would seem Sage 6.2.5 has QAM support for HVR-1600.
Now I just need the time to test it all out.
http://forums.sagetv.com/forums/showthread.php?t=26584