Blank screen + some garbage in V2

[mogrinz]

Rats! I wish I could get as far as some of the rest of you folks!

Attached is a pic of what I see when I start V2.... Never saw anything like this under 1.4

[mogrinz]

In case it helps, here's the startup log...

[mikbro]

Try uninstalling 1.4 (backing up your sage.properties and wiz.bin if they are important to you). Then delete the SageTV directory and re-install the beta.

[danward79]

Hi

I had similar after i tried adjusting the overlay properties

[falchulk]

An alternstive if you still have problems is to move your proprties and propertier backup to a diffrent directory and let sage create a new one on startup. That way you cansee if it's your settings or 2.0 with your hardwar. Helps narrow down the possibilities.

[mogrinz]

Alas, still no luck. I tried all the recommendations here, but even after a complete uninstall/reinstall, v2 just doesn't work for me. Which is strange, b/c 1.4 never gave me any problems.

I just see a mostly blank screen (with what I do see being garbage chars) as shown in my initial post.

[carlgar]

What is your configuration? Are you using Hauppauge 250(s) or 350? If so are you using the latest 1.8 drivers from the shspvr site?

[SHS]

He has a 350 carlgar
What kind of Video card do you mogrinz?.

[carlgar]

I suspect a encoder related problem because of these lines in the log file:
Fri 1/23 21:40:12.966 Failed to find:Hauppauge WinTV PVR PCI II Capture
Fri 1/23 21:40:12.967 Could not load video capture filter for encoder
Fri 1/23 21:40:13.043 Removing encoder because it failed the check:Hauppauge WinTV PVR PCI II

[AJ Bertelson]

I had that problem.

I was messing around with the background trying to make a different background, the different background worked but I got what you have. The only way I could get it working again was to delte the directory, but make sure you have it backed up. Sage doesn't un-install everything during the un-install.

[mogrinz]

Found the problem.
When I swapped out my Radeon card for a GeoForce 2 I had in another PC, the display worked.

Now that the Radeon isn't in my server, but a client, I'll have to see if SageClient has the same display problems. Meanwhile, I'll submit the issue with Sage not working with the ATI Radeon (72000) to the bug database

[cohnhead]

I finally installed the V2 beta last night and got the exact same garbage on most of the menu screens. I also have a Radeon 7200 video card. Is there a fix yet for this issue?

Marc

[Watter]

Originally posted by mogrinz
Found the problem.
When I swapped out my Radeon card for a GeoForce 2 I had in another PC, the display worked.

Now that the Radeon isn't in my server, but a client, I'll have to see if SageClient has the same display problems. Meanwhile, I'll submit the issue with Sage not working with the ATI Radeon (72000) to the bug database

I use the same card in one of my clients. I also had problems until I updated the video drivers, then it worked fine.

-Watter

[cohnhead]

Watter,

Do you know what version of the drivers you used that worked?

Marc