![]() |
|
SageTV Beta Test Software Discussion related to BETA Releases of the SageTV application produced by SageTV. Questions, issues, problems, suggestions, etc. regarding SageTV Beta Releases should be posted here. |
![]() |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
No HD Sound in Latest Firmware
I just updated to the 5-23 firmware for the HD extender and...well...should I have sound for HDTV? This applies to both pre-recorded (both recently and from months ago) and live TV. Is there a way to go back to the 5-19 firmware because I really like to watch TV with sound? I'm using multiple types of HD OTA tuners (A180, HDHomeRun, and an Hauppauge). Sound worked in the previous build. I have the extender configured to use SPDIF for sound out and HDMI for video. Oh, and analog works and sounds fine.
Thanks, Ben Last edited by benjamintm; 05-23-2008 at 11:33 PM. |
#2
|
|||
|
|||
I just installed the 0523 beta firmware and now I have no SPDIF audio. Power cycled the HD100 and still no audio. The update also did not fix the micro stutter problem. How to I revert back to production release firmware?
I just updated to the latest firmware to see if they fixed the micro stutter problem. Now I don't have any audio and the micro stutter problem is still there. As with you, SPDIF audio and HDMI video. I want to revert back to the previous version too. Mediahome |
#3
|
|||
|
|||
Same here. Lost audio on optical and HDMI.
I also just updated to the 0523 Firmware and lost sound on HDMI and optical (SPDIF). -Melgon |
#4
|
||||
|
||||
Quote:
I only lost audio on my HD recordings. SD Recordings are just fine. Weird. It also looked like the combo of server and firmware pretty much fixed my stuttering problem on R5000 HD recordings of local stations from Dish Network, as well as the audio drop while skipping. Too bad I couldn't stay... Cheers, Slipshod
__________________
SageTV V7 (WHS), Diamond UI Server: WHS with Xeon X3350, 4GB ECC, ASUS P5BV-C/4L, recording into a 6.6TB Drive pool Tuners: 4 (2x HDHR) Clients: 2x HD300, 1x HD200 Extenders, 1x Placeshifter 2x Roku XD |
#5
|
||||
|
||||
Also testing out 0523. No sound on my HD Extender on HD channels, when tested now the sound was indicated as AC3 5.1. And I output sound through optical. My receiver do not have any indication of data received.
On the pixelation issue I've been having since day 1 on my 1080 HD channels. It's actually a little improved. I'm really sure about this. I don't get the 'pixelation' anymore in the stutters. But it still stutters, although with a 'clean' image. So one step closer.
__________________
SageTV 7.1.9 (headless/service) • JavaRE 1.6.0_37 • 2x FloppyDTV C/CI (DVB-C) (fw: 1.2.10 B43110) (CAM: Conax) • Win7 x64 • Intel E3-1245V2 3.4GHz • 16GB PC3-10600 ECC • ASUS P8C WS (Intel C216) • APC Back-UPS RS 800 • STP-HD300 Extender (fw: beta 20110506 0) - HDMI/SPDIF - Yamaha RX-V2700 - HDMI - Sony KDL-52X2000 |
#6
|
|||
|
|||
I will echo the above problems. No sound on HD recordings after upgrading.
If somebody could let us know how to get back to 0519, that would be great before my wife wants to watch something. ![]() Greg |
#7
|
|||
|
|||
![]()
On output to both SD and HD televisions, slideshow and fullscreen picture display is messed up.
I am also having the issue with HD sound. I have my primary sound through my TV, via HDMI, but us the analog to have sound go into my backyard. Right now if the anlog ports have anything plugged into the when the HD1000 starts, regardless of settings only the analog ports get output. No sounds is played through the HDMI. I have to power off, unplug the analog cables, switch the audio configuration from HDMI to analog, then back to HDMI to get the sound to play out the HDMI. I can then plug in the analog ports. All then works. But as soon as I put the system in standby or turn if off, no sound through HDMI. ![]() |
#8
|
||||
|
||||
Count me in as a "me too"? It appears to be all my HD audio.
|
#9
|
||||
|
||||
If you do another firmware update, it should go back to v20080519.
The audio issues will be looked into more. - Andy
__________________
SageTV Open Source v9 is available. - Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1. - Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus - HD Extenders: A) FAQs B) URC MX-700 remote setup Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request. |
#10
|
|||
|
|||
Same result here. On my recordings, which previously played fine, I get video but no audio with this latest beta. My connection is HDMI and has always been configured set for SPDIF audio, even though there's just an HDMI connection with no optical audio cable. So, just for the heck of it, I went into setup and tried to change audio to HDMI. Now I have a bigger problem in that I'm unable to acquire an IP address through DHCP after multiple attempts. I'll just let it rest and go back to it later on.
Ugh. ![]() ![]()
__________________
Sage Server: Dell Dimension 9200, Intel Pentium D 2.80GHz Dual Core, 8GB Ram, Windows 7 Professional 64bit, Sage 7.19, HDHR (2 OTA), HDHR Prime 3CC (2) HTPC Client: Intel DH61AG, Intel i5 cpu, 8GB Ram, Windows 7 Professional 64 bit Sage Clients: Sage HD-200 Extender, Sage HD-300 Extender |
#11
|
||||
|
||||
Thank you for your rapid response on this.
|
#12
|
|||
|
|||
Thanks, Andy. I reset my router in order to obtain DHCP address, and am have updated to 20080519. Looks like you guys removed 20080523. Let us know when it's ready for testing again.
__________________
Sage Server: Dell Dimension 9200, Intel Pentium D 2.80GHz Dual Core, 8GB Ram, Windows 7 Professional 64bit, Sage 7.19, HDHR (2 OTA), HDHR Prime 3CC (2) HTPC Client: Intel DH61AG, Intel i5 cpu, 8GB Ram, Windows 7 Professional 64 bit Sage Clients: Sage HD-200 Extender, Sage HD-300 Extender Last edited by Ron; 05-24-2008 at 11:56 AM. |
#13
|
|||
|
|||
Thank you - "upgrading" now...
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
My HD Future | unkyjoe | General Discussion | 13 | 12-01-2007 08:04 PM |
Sound on some HD Recordings only background | dadams | SageTV Beta Test Software | 1 | 11-10-2007 10:25 AM |
Will seting up HD ever be plug n play | davefred99 | SageTV Software | 3 | 09-10-2007 10:28 AM |
PVR500, Sigmatel 9200, Dimension 9100: Keep losing sound. | timm5 | Hardware Support | 2 | 08-04-2007 07:31 AM |
Can this PC do HD? | dholmes97 | Hardware Support | 4 | 02-15-2007 09:23 PM |