|
|
|||||||
| SageTV HD Theater - Media Player Discussion related to using the SageTV HD Theater as a Media Player, i.e.: in use while not connected to a SageTV server. Questions, issues, problems, suggestions, etc. relating to using a SageTV HD Theater as a Media Player should be posted here. Use the SageTV Media Extender forum for issues related to using it while connected to a SageTV server. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
09-27-2009, 07:26 AM
|
|||
|
|||
|
HD200s no auto log-in
I have 5x SageTV HD Theater, and all of the suddon every one of them is requiring me to log in every time I turn them on. Even though I click the auto log in...
I have gone through the wizzard twice after looking in the Set-up and not getting anything I tried there to work. The only change I made to the computer that I can think of is allowing remote log-in in Windows Vista.
__________________
Super•Micro PDSMA+ motherboard (w/ remote hardware monitoring), Quad Core 2.4GHz Xeon X3220, 4 GB DDR2 667 RAM 4x 1.5 TB Seagate - recording storage, 500GB - Windows 7 Professional 5x HVR-1600 (model 1199) - ATSC = Antenna 3x HD200 for front end hooked to TVs 1x Placeshifter License for remote connections 
|
|
#2
09-29-2009, 08:22 AM
|
|||
|
|||
|
I still have no clue what's going on here. I'm about ready to reinstall windows on the server and start from scratch.
__________________
Super•Micro PDSMA+ motherboard (w/ remote hardware monitoring), Quad Core 2.4GHz Xeon X3220, 4 GB DDR2 667 RAM 4x 1.5 TB Seagate - recording storage, 500GB - Windows 7 Professional 5x HVR-1600 (model 1199) - ATSC = Antenna 3x HD200 for front end hooked to TVs 1x Placeshifter License for remote connections
|
|
#3
09-29-2009, 08:37 AM
|
||||
|
||||
|
What exactly is happening -- what login are you referring to?
- Andy
__________________
SageTV Open Source v9 is available. - Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1. - Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus - HD Extenders: A) FAQs B) URC MX-700 remote setup Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request.
|
|
#4
09-29-2009, 08:57 AM
|
|||
|
|||
|
My HD200s were all set up so that when they were turned on the connected to my SageTV server. A few days ago all of them started doing this at the same time. You turn them on, they wait 5 seconds to auto connect. Then at the end of the 5 seconds they ask for a user name and password. Below the user/pass is a check box to auto-log in. I check it, or leave it blank every time I need to enter the user/pass. Honestly I don't even remember having to do that when I first got them but w/e.
I just entered the same user/pass I do for Placeshifter.
__________________
Super•Micro PDSMA+ motherboard (w/ remote hardware monitoring), Quad Core 2.4GHz Xeon X3220, 4 GB DDR2 667 RAM 4x 1.5 TB Seagate - recording storage, 500GB - Windows 7 Professional 5x HVR-1600 (model 1199) - ATSC = Antenna 3x HD200 for front end hooked to TVs 1x Placeshifter License for remote connections
|
|
#5
09-29-2009, 09:03 AM
|
||||
|
||||
|
Don't let them auto connect next time -- stop the auto connection, then go to the SageTV Servers menu and reselect the server to see what happens.
But, I don't know why it is asking for a username & password -- did the 'miniclient/authenticate_local_connections' property get set to true somehow on the server? If so, set it back to false. - Andy
__________________
SageTV Open Source v9 is available. - Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1. - Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus - HD Extenders: A) FAQs B) URC MX-700 remote setup Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request.
|
|
#6
09-29-2009, 02:06 PM
|
|||
|
|||
|
miniclient/authenticate_local_connections is set to false.
I tried not auto connecting, had them rescan for the server, and it still asked for user/pass. What constitutes as a "local" ip for sage? My sage server is 10.0.3.2 and the front ends are still non static 10.0.10.x.
__________________
Super•Micro PDSMA+ motherboard (w/ remote hardware monitoring), Quad Core 2.4GHz Xeon X3220, 4 GB DDR2 667 RAM 4x 1.5 TB Seagate - recording storage, 500GB - Windows 7 Professional 5x HVR-1600 (model 1199) - ATSC = Antenna 3x HD200 for front end hooked to TVs 1x Placeshifter License for remote connections
|
|
#7
09-29-2009, 02:41 PM
|
||||
|
||||
|
How about the subnet masks -- are they the same? If not, you'll need to log in as you are experiencing.
- Andy
__________________
SageTV Open Source v9 is available. - Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1. - Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus - HD Extenders: A) FAQs B) URC MX-700 remote setup Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request.
|
|
#8
09-29-2009, 03:33 PM
|
||||
|
||||
|
Quote:
Gerry
__________________
Big Gerr _______ Server - WHS 2011: Sage 7.1.9 - 1 x HD Prime and 2 x HDHomeRun - Intel Atom D525 1.6 GHz, Acer Easystore, RAM 4 GB, 4 x 2TB hotswap drives, 1 x 2TB USB ext Clients: 2 x PC Clients, 1 x HD300, 2 x HD-200, 1 x HD-100 DEV Client: Win 7 Ultimate 64 bit - AMD 64 x2 6000+, Gigabyte GA-MA790GP-DS4H MB, RAM 4GB, HD OS:500GB, DATA:1 x 500GB, Pace RGN STB.
|
|
#9
09-29-2009, 03:53 PM
|
|||
|
|||
|
I was starting to think that was the issue... Grrr is there anyway to change that requirment?
__________________
Super•Micro PDSMA+ motherboard (w/ remote hardware monitoring), Quad Core 2.4GHz Xeon X3220, 4 GB DDR2 667 RAM 4x 1.5 TB Seagate - recording storage, 500GB - Windows 7 Professional 5x HVR-1600 (model 1199) - ATSC = Antenna 3x HD200 for front end hooked to TVs 1x Placeshifter License for remote connections
|
|
#10
09-29-2009, 04:34 PM
|
|||
|
|||
|
Okay so I just gave Sage it's own IP block...(10.0.4.x) It's working now, keeping all my different servers grouped together made for nice easy firewalling, but this works too.
__________________
Super•Micro PDSMA+ motherboard (w/ remote hardware monitoring), Quad Core 2.4GHz Xeon X3220, 4 GB DDR2 667 RAM 4x 1.5 TB Seagate - recording storage, 500GB - Windows 7 Professional 5x HVR-1600 (model 1199) - ATSC = Antenna 3x HD200 for front end hooked to TVs 1x Placeshifter License for remote connections
|
|
#12
09-29-2009, 10:46 PM
|
|||
|
|||
|
Yeah I'm running a FreeBSD based firewall/router on a Dell PowerEdge 750 (overkill I know but it was uber cheep). I set all my servers to 10.0.3.x, but the change didn't affect the Sage server till it renewed it's IP via DHCP a couple days later.
__________________
Super•Micro PDSMA+ motherboard (w/ remote hardware monitoring), Quad Core 2.4GHz Xeon X3220, 4 GB DDR2 667 RAM 4x 1.5 TB Seagate - recording storage, 500GB - Windows 7 Professional 5x HVR-1600 (model 1199) - ATSC = Antenna 3x HD200 for front end hooked to TVs 1x Placeshifter License for remote connections
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Hardware Advice - New Server for transcoding vs. more HD200s | bcloud | Hardware Support | 5 | 09-04-2009 09:05 AM |
| DHCP not addressing HD200s, need help | najames | SageTV Media Extender | 18 | 07-15-2009 09:05 PM |
| TSSplitter.log | zakrzep | SageTV Software | 0 | 10-15-2008 04:35 AM |
| Debug log always ON | polen | SageTV Beta Test Software | 8 | 10-20-2006 07:34 PM |
| Sage Log | mike1961 | SageTV Software | 0 | 07-19-2006 03:07 PM |
Linear Mode
