|
HDHomerun missing some channels only with Win7
I'm dual-booting to two different partitions so I can keep using SageTV running under XP while I debug the issues with Windows 7.
The most recent issue is that several HDHomerun channels (ATSC, OTA) cannot be tuned in SageTV. They report "No Signal".
The HDHomeRun Setup "Antenna Channels" tab has a view button, and the channels all work fine when clicking "View" from HDHR setup to play in WMP.
One common factor among the problem channels is that they all have a "Guide Number" lower than the "Tune". For example 4.1 tunes as 34-3, 5.1 tunes as 24.3, and 9.1 tunes as 29.3. These are the channels that do not work in SageTV. Other channels that have closely related guide and tune numbers work OK in SageTV.
I tried the full channel scan in SageTV under the Video Source setup, but it didn't help.
All the channels work fine when run from SageTV in the XP partition.
__________________
HD300 extender with (2020 New Build) SageTV 64 bit V9.2.2.903 (service mode), Running on Windows 10 (64 bit), Intel Core i7-10700K CPU, 16G RAM, GIGABYTE Z490 UD motherboard. NVidia GTX1650 Super; Viewsonic LCD on one output and Mitsubishi WD57734 HDTV via DVI/HDMI on other output. HDHomeRun HDHR5-4US tuner, Hauppauge "Siena" 1512 HD-PVR2 connected to Cisco Cable modem from Spectrum, tuned with USB-UIRT.
Last edited by timg11; 01-09-2010 at 04:48 PM.
|
01-09-2010, 04:39 PM
Similar Threads
Linear Mode
