Where's the "Previous Channel" Function

[RonBoyd]

The Remore Control for the HD200 had a "Prev Ch" button. This was replaced by a "DVD Menu" button on the HD300's Remote. (The HD200 Remote will work with the HD300 for this function but having a Remote in the clutter to serve a single-button purpose seems so silly.)

Where do I find the "Previous Channel" Function with the HD300 Remote?

[gplasky]

You can relearn the Previous channel command to any button on the remote you want if you can't find it.

Gerry

[RonBoyd]

Originally Posted by gplasky

You can relearn the Previous channel command to any button on the remote you want if you can't find it.

When I search the User's Manual, this is the only reference to "relearn" I can Find:

SageTV V7.0 User’s Guide Chapter 5: Configuring SageTV Page 162
Copyright 2010 SageTV, LLC All rights reserved

For additional support, go to

www.sagetv.com/support.html or email us at support@sagetv.com

Step 6B: Teach SageTV the IR Codes from the Receiver’s Remote Control

In order for SageTV to be able to control a new receiver device, it needs to be taught the codes from the receiver’s IR remote control. Follow the instructions shown on the screen to teach SageTV the numbers 0 – 9 from the receiver’s remote. When done, continue to step 7.

SageTV displays a notification once a code has been successfully learned. If the IR code is not learned properly, SageTV will ask to try to relearn the code.

Note: For best results, make sure the remote is using fresh batteries and hold it just a few inches away from IR transceiver. Push and hold the button down until SageTV acknowledges that the code has been learned.

On Page 224, I find this:

List of All SageTV Commands
Command....Default Keystroke....Event #..... Description

Previous......................................60

Channel

During media playback, switches to the previously playing media. That could be the previously watched channel while watching live TV, the previously viewed recording or video, or the previously played song.

Is this what you are referring to?

[Opus4]

See pages 195+ in the PDF manual; that covers how to assign keys/buttons to commands in Detailed Setup -> Commands.

- Andy

[RonBoyd]

Originally Posted by Opus4

See pages 195+ in the PDF manual; that covers how to assign keys/buttons to commands in Detailed Setup -> Commands.

That took care of it. Thank you.