|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
IR file questions
Does anyone here know for sure what the numbers in the IR file mean?
I don't have a example in front of me but it goes something like this: NameOfDevice # # # # # What do the numbers and their respective positions mean? Also, is there a way to access the IR device settings through the UI in V2? Or is it all done in the IR file and the properties file? Thanks, Bryan |
#2
|
|||
|
|||
I don't know what the first 2(my Sage taught .IR uses 0s for the first 2 digits) are for, but from memory...
The 3rd number tells sage how many digits to transmit for a channel change. ie my cable box only use numbers up 999 so it's set to 3. If you had a Dish/DirectTV that used channels #s in the thousands you'd want a 4 in the third digit. etc The 4 and 5 are the internumber and intersequence delay settings settings. They are listed in milliseconds. I honestly don't know about the Sage2 UI as my USB-UIRT was setup way back in 1.4. If I find the answer I'll post back. Hope this helps some. Best of luck.
__________________
"Between you and me, my name's irrelevant." Last edited by justme; 05-13-2004 at 04:49 PM. |
#3
|
||||
|
||||
The first one is bps
|
#4
|
|||
|
|||
Thanks guys, I was able to reduce the time it takes to change a channel, much quicker now!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|