|
|
|||||||
| Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
06-09-2004, 01:01 PM
|
|||
|
|||
|
Fixed it
 Not sure why but when I removed the Blackbird Card form the #1 slot (next to the APG slot) to the last slot, rebooted the hardware installer noticed that I moved it and reinstalled all the drivers for it. Now it looks like all is well.Hope this might help someone else Doug 
|
|
#2
06-09-2004, 01:03 PM
|
||||
|
||||
|
From what others have been saying around here, it was probably sharing its IRQ with the AGP card & moving it resolved that. It has been suggested not to place your encoders next to the AGP card.
- Andy
__________________
SageTV Open Source v9 is available. - Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1. - Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus - HD Extenders: A) FAQs B) URC MX-700 remote setup Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request.
|
|
#3
06-09-2004, 02:21 PM
|
||||
|
||||
|
Depends on the sysbrd I suspect. I have a PVR250 next to the AGP slot, not much choice, PVR250 in all 4 available PCI slots! (1 slot with RAID controller, and it won't fit physically in the slot next to the AGP do to depth of 3ware 4in3 HD cages.) Should also mention I have the 250 next to the AGP slot as my highest priority, first used, encoder. No problems...
__________________
Click here for Pic's & spec's of my SageTV Server & HTPC Client
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
