|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
HD-PVR Drivers ???
So I am trying to add an HD-PVR back to my system.
I wanted to start clean so I ran the hardware clean utility and rebooted, a few times. Redetected and installed, and setup as a source. Many times. Removed all referances to any tuner in the properties file. No matter what I do, I get "No Signal". I can add my other tuners in with no issue and all works just fine. The HD-PVR is no go. What can I be missing or what could be wrong? |
#2
|
||||
|
||||
Can you view the device using TME or VLC?
|
#3
|
||||
|
||||
I haven't tried, I am running on 2008 R2, 64 bit. I am starting to thik it's DOA.
I guess I need to try on a Win 7 PC. What is TME? |
#4
|
|||
|
|||
Arcsoft Total Media Extreme. It should be on the included install disc.
It includes a recorder app that you can use to test the HDPVR. J |
#5
|
||||
|
||||
Thanks, It's funny, I am so use to jst going to the manufactures site and getting the latest, I never look at the included software any longer. Bad habbit. I'll have to try that when I get home tonight.
|
#6
|
|||
|
|||
Two other things to look for -
1)Make sure your cables are plugged into the HD-PVR input, not output. I made this mistake and it is very easy to do. 2)If I remember there are two settings - with and without spdif. I seem to recall not getting video when I selected with spdif and I was using analog or vice-versa and make sure that the correct cabling is connected when you do this. edit - One more thing to try is that I think VLC might be able to use it as a video source if you can't find TME.
__________________
New Server - Sage9 on unRAID 2xHD-PVR, HDHR for OTA Old Server - Sage7 on Win7Pro-i660CPU with 4.6TB, HD-PVR, HDHR OTA, HVR-1850 OTA Clients - 2xHD-300, 8xHD-200 Extenders, Client+2xPlaceshifter and a WHS which acts as a backup Sage server |
#7
|
|||
|
|||
I haven't used my HD-PVR for a while but doesn't it require installing TME?
I'm just using Colossus now but I checked my server pc. It has TME installed. I never use the program but I think Colossus and HD-PVR require TME to work in Sage. |
#8
|
||||
|
||||
Quote:
Quote:
I don't remember haveing to setup TME, but maybe i did IDK. I will have to try the other setting and see what happens. Thanks for the sugestions! |
#9
|
|||
|
|||
I think that is a codec issue that may have been the case with XP and perhaps Vista, but not with W7.
__________________
New Server - Sage9 on unRAID 2xHD-PVR, HDHR for OTA Old Server - Sage7 on Win7Pro-i660CPU with 4.6TB, HD-PVR, HDHR OTA, HVR-1850 OTA Clients - 2xHD-300, 8xHD-200 Extenders, Client+2xPlaceshifter and a WHS which acts as a backup Sage server |
#10
|
||||
|
||||
Well TME works just fine and none of the options in Sage work for the HD-PVR.
Any suggestions? I have used the hardware clear with every option and rebooted tried differant drivers and even wiped the Sage.prop file. the olnly thing I didin't do is start fresh by reloading the OS, and that's gonna happen. This server is also running Hyper-V as well. So I need to wait a few more months until I upgrade the hardware to do that. |
#11
|
||||
|
||||
Did u reboot ur OC after installing the new hdpvr. Also, very often you will get no preview playback while setting the device up. If your not using optical audio connections to the hdpvr, do not use the +spdif option only the one listed component. Since you said tme worked fine to playback the hdpvr then the hdpvr will work eventually we just need to figure out what's not working. If you attempted to setup sagetv with the hdpvr Asa source using spdif then you will need to completely remove that source and re-add it back as component only.
I have had instances in the past where sagetv would just not accept any new recording sources for whatever reason and I had to uninstall everything and start over. Just save your wiz files first. Also what drivers are you running for HDPVR |
#12
|
||||
|
||||
I am using component +spdif, I can't you how many times I have used hcwClear and removed all entries from the properties file and rebooted.
I think you are right, I am at the reinstall stage for what ever reason. For now I am going to go back to my 1600's and wait on the HD-PVR until I migrate my server to it's new hardware. Thanks. |
#13
|
|||
|
|||
I'm just getting mine setup this week. I followed this thread:
http://forums.sagetv.com/forums/showthread.php?t=44511 Based on the thread, I didn't install TME at all - just the driver... I got the latest one from the Hauppage site here: http://www.hauppauge.com/site/suppor...ort_hdpvr.html I didn't have any issues getting the HD-PVR audio/video into STV when following this. I'm just having issues getting my STB to change channels via USB-UIRT |
#14
|
||||
|
||||
Quote:
This whole experiment totally hosed my setup, including the OS (2008R2). So now I am completly on 7MC until I can redo the whole thing. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ATI drivers | tvmaster2 | Hardware Support | 0 | 11-28-2009 07:06 PM |
Drivers for Win 2K | BobbyDing | Hardware Support | 0 | 05-06-2009 10:29 AM |
Best set of drivers for PVR-250? | sunray | Hardware Support | 0 | 06-01-2006 09:29 PM |
one for the FAQ: 350 + OSD -- which drivers | jman | SageTV Software | 5 | 05-14-2004 05:43 PM |
pvr 350 and new drivers | Dave | SageTV Beta Test Software | 1 | 04-12-2004 04:45 PM |