|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Sage TV 9.2_beta1 software and HDHomeRun DUAL hardware issue
Hello everyone on the forum!
If you only want to hear about my issue, go ahead and skip to the last paragraph. Otherwise, lets begin. My name is Matt Johnson and I'm inside at home most of the time, just like you guys are I'm sure since as we all live in a pandemic world. Since I _am_ inside, I thought I would spruce up my entertainment options. I recently found in a closet a HDHomeRun DUAL TV LAN device that I purchased maybe 11 years ago and have never used. I installed the HDHomerun_setup program and it went fine. The program saw the device on the network and I went through the steps including the channel scan and it found a bunch of stuff. So for so good except the HDomeRun client doesn't seem to be supported on this old hardware. So, Sage TV here I come. I last used SageTV when I bought it in 2010 at version 6.6. But I left that version alone and downloaded SageTVClientSetupx64_9.2.0_beta_1.104.exe I only need the main program for now. I don't need the remote client or the place shifter. The SageTV install was going well until it tried to scan for channels. It did not find any when I know they are there because I can see them from the HDHomerun_setup program I have the Attempted to look though all the options but didn't see anything that looked like it would cause a scan to return nothing. Your help is appreciated, thank you. -Matt Johnson addendum: Device: HDHomeRun DUAL Model: HDHR-US Device ID: 1013756C Firmware: 20200225 Software: SageTV main exe, version 9.2.0-beta1.104 Link to Digital Antenna.xml from the HDHomerun_setup software Link to logs will be given upon request. |
#2
|
|||
|
|||
First of all, welcome!
Second, the 9.2.0 beta version has long since been superseded by 9.2.2. You can find it in the sticky "Windows Installer" post which is also referenced in my signature below. In that post you will find some help with the HDHR setup under the "known issues" section. In short, 64-bit SageTV is not directly supported by HDHR software but there are 2 options to try:
I would highly recommend installing 9.2.2 and then trying one of the options above. Obviously trying one of the HDHR configuration settings is less effort. Good luck!
__________________
Windows Installer |
#3
|
|||
|
|||
Welcome Matt,
The HDHomerun Dual tuner continues to work just fine with Sage. I've had a pair of these running for years. Current (i.e, applicable to Sage v9.2.2), detailed HDHR setup instructions are available here: https://sagetv.fandom.com/wiki/Appen...p_Instructions
__________________
System #1: Win7-64, I7-920, 8 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HDHR-US (1st gen white) tuners. HD-200. System #2: Win7-64, I7-920, 8 GB mem, 4TB HD. Java 1.8.0_131. Sage v9.1.6.747. ClearQAM: 2x HDHR3-US tuners. HD-200. System #3: Win7-64, I7-920, 12 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HVR2250; Spectrum Cable via HDPVR & USB-UIRT. 3x HD-200. |
#4
|
|||
|
|||
Quote:
Thanks. I feel welcome now. |
#5
|
|||
|
|||
Quote:
|
#6
|
|||
|
|||
Quote:
Before you do all of that, try the 2nd option first as it requires much less effort. I should probably reverse the order of the suggestions.
__________________
Windows Installer |
#7
|
|||
|
|||
I installed Sage 9.2.2 64 bit and in the HDHR software, set the compatibility mode to "JRiver." It works just fine with my HDHR Dual tuner. I currently have just one tuner being fed signal, but will connect the antenna to the other one soon. This is for a new build in progress, so I'm still working on getting everything set up before I cut over from the old build to the new one. Gotta get all of my recording files copied over. I think copying over the old wiz.bin to the new server (and verifyingi) will be the last thing to do before cutting over - though I have just enough tuner hardware, etc. that in theory I could run the two in parallel for a while.
__________________
Server: Windows 8.1 4gb RAM; 4TB SATA + others. Homebrew quad core AMD. Inputs: Haup. 980, 850 & 950Q on ATSC; Haup 1600 on ATSC & Comcast 2 DTAs with USBUIRT for NTSC. Haup 1800 on ATSC. HDHR Dual (ATSC). Sage 9.22 64 bit. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS Sage Hardware and Software | jm987 | SageTV Marketplace | 11 | 04-06-2013 04:28 PM |
HDHomerun HDHR3-US (non-cable card) hardware issue? | KryptoNyte | Hardware Support | 4 | 01-26-2013 12:54 PM |
Strange new issue - hardware or software? | pjpjpjpj | Hardware Support | 9 | 06-05-2012 07:43 AM |