|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
Wake on USB, How to?
Hello,
I've made an HTPC which works beautifully (S3 suspend, pvr works great) thanks to this forum. I still have one little problem. The motherboard in the pc is an Asus A7V880, which should support Wake on USB. http://www.asus.com/prog/spec.asp?m=A7V880&langs=01 I adjusted the jumpers according to the manual, to enable USB Wake Up. http://www.asus.com.tw/pub/ASUS/mb/s...791_a7v880.pdf I then went to the BIOS to enable USB Wake Up, only to find that there was no such option. The only options available were: Wake on - Ring, -PS/2 Mouse, -PS/2 Keyboard, -PCI Device, -Event Furthermore, I couldn't select the "Let this device wake-up the pc when in stanby" mode in the device manager settings of the USB Host. I upgraded to the last bios for this m/b and installed the latest 4in1 drivers from VIA to get it to enable, but no luck so far. I just want my remote to be able to wake up my pc when in suspend, can anyone help me? Thanks in advance. Last edited by Methius; 04-07-2005 at 12:56 PM. |
#2
|
|||
|
|||
ASUS MoBo uses the jumper settings only. No BIOS mod needed.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|