Added Fusion5 USB, no channels

[White94Cobra]

Can someone point me in the right direction...? I just purchased a new Sony SXRD HDTV. Last year I tried getting a Fusion5 USB to work with Sage (no luck). With the new version and a new TV I figured it was time to try again.

Sage recognizes the tuner, but when I go to pick my EPG lineup, only one or two channels show up (there should be 3 HD, and 5 DTV). I tried OTA local, digital, etc, but none of the available channel lineups show more than one or two of the local channels. I tried scanning but it didn't find anything. I tried manually adding a channel but ended up with no guide data, it was the SD feed and not the HD feed, and it looked like crap). When I setup the same tuner in the same PC under MCE 2005, it looks great (even the SD feeds) and their channel guide shows all available DTV and HDTV stations with guide data (no manual mapping or scanning necessary). All channels do have 85% - 100% signal strength.

BTW - Zap2It.com shows all of my OTA broadcast channels.

[White94Cobra]

I found some info after additional searching in the EPG forum. I'll try using the channel-channel-subchannel numbering when adding a manual channel tonight.

[White94Cobra]

Well... I can now tune to the digital channels and they are listed in the guide (I.E. KTVLDT 35-10-1). However, they all show no data - and I did enter the Zap2It station ID in the third box. I've E-mailed support, so we'll see what happens. I'm thinking I may be able to just use the standard call sign (KTVL instead of KTVLDT) and map it to 35-10-1 and see if it will pull the guide data from the analog channel.