Starting A Show From the Beginning

[follower]

Is there a way to start a show from the beginning again (using the controller). With a mouse it is easy to just drag the positon to the beginning. The problem is my kids watch things over again and it is normally at the end. I have to put it into time scale and hit the rew button about 30 times to get it to the beginning of the file. Any other way?

follower

[trevorst]

We have been asking for this for a long time.. Still not there.

[carlgar]

I don't know of a specific command to do this. I would suggest that you use the Skip Bkwd #2 sage command. If you have not already set this up, then go to Setup->detailed setup->commands and look toward the bottom. Once you have the Skip Bkwd working you can then change the default skip time from the default 150 seconds to something like 1800 seconds for a thirty minute program. To change this value shutdown SageTV and edit the properties file. Change the "videoframe/ff_time2=150000" line to "videoframe/ff_time2=1800000".

Edit: replace "ff_time2=" with "rew_time2=-", be sure to include the minus sign. I copied the wrong value.

BTW: You can redefine your remote rewind key to use the Skip Bkwd #2 command.