I have just set up Sage with 2 x FloppyDTV-S2 tuners from the same manufacturer (Digital Everywhere). Both connect via Firewire & the FireDTV unit is basically the FloppDTV in an externally powered box whereas the FloppyDTV can be fitted within the PC case. So my answers should apply to both FireDTV & FloppyDTV devices.
Quote:
Originally Posted by meep
1. To use this device with sage, is it recognised as a tuner natively or is it necessary to use the DVB Network Encoder?
|
It's recognised natively using the supplied BDA drivers. It's a very good idea to confirm that all is working OK with the supplied software first (FireDTV Viewer which is a customised version of DVBViewer).
Quote:
Originally Posted by meep
2. In either case (above), I presume Sage can tune channels on the device directly (USB-IRT or similar not required). Correct?
|
Yes.
Quote:
Originally Posted by meep
3. Are multiple units supported in Sage? Any problems associated with having two or more FireDTV units?
|
I have two units & don't see any problems with adding more. In fact I may try it if I can fit the other two FloppyDTV-S tuners that I own into the PC case.
Quote:
Originally Posted by meep
4. Are there any guides to setting these units up with Sage?
|
Not as far as I know. It took me a while to figure it out but much of the fruit of my mistakes can be found here
http://forums.sagetv.com/forums/showthread.php?t=35302