PlugIn: YouTube (2015)

[tmiranda]

Originally Posted by Smiley

I would expect the runtime of the video to be provided by the YouTube API, but since I do not have first hand knowledge of this it is merely a guess on my part...

It is available through the API. I thought you knew of a clever way to get it directly from the .mp4.

[Smiley]

Originally Posted by tmiranda

It is available through the API. I thought you knew of a clever way to get it directly from the .mp4.

I'm sure it is possible to determine the video length from the MP4 header information, but it may require the entire file to be downloaded first, since most of the libraries supporting this type of functionality will probably also do a checksum of the file to ensure it is valid - and until the file is fully downloaded this is not the case, so in my opinion the best bet is to use the video length from the API call.

EDIT: And here it is - it seems to require the full file, although I haven't tested it -> https://code.google.com/p/mp4parser/...ion.java?r=240

#Smiley

[Rob23]

Originally Posted by tmiranda

The bad news is that SourceForge is still down. The good news is that I managed to get the files hosted on GitHub.

Anyone else having trouble getting the latest update to download? I get the following message:

"Plugin Update Progress: Done - FAILED - Resource Download
http://github.com/tmiranda1962/tmiranda/releases/downlad/v0.01/YouTubeSTVi-0.06.zip"

[Smiley]

Originally Posted by Rob23

Anyone else having trouble getting the latest update to download? I get the following message:

"Plugin Update Progress: Done - FAILED - Resource Download
http://github.com/tmiranda1962/tmiranda/releases/downlad/v0.01/YouTubeSTVi-0.06.zip"

If the above url is correctly typed it looks like a typo... because the following url works just fine...

https://github.com/tmiranda1962/tmir...eSTVi-0.06.zip

It seems to be the 'o' in download that is missing...

#Smiley

[Rob23]

Originally Posted by Smiley

If the above url is correctly typed it looks like a typo... because the following url works just fine...

https://github.com/tmiranda1962/tmir...eSTVi-0.06.zip

It seems to be the 'o' in download that is missing...

#Smiley

You are correct - I did have a typo. However, when attempting to update from within SageTV, I still get the error. I noticed the url to which you linked is secured (i.e. https) whereas the error I receive indicates it is attempting to pull from an http site.

[krasev]

I use SageTV v7 and install YouTube2015 plugin and it works fine in SageTV7 STV... but I got used to old UI and run old STV SageTV3 and here is the problem with YouTube 2015 plugin... I can not run it with old UI...
I Installed YouTube plugin from old UI and installed it from STVI file "... SageTV7\YouTube.stvi", but it looks like there are 3 more dependent Google plugins installed automatically with YouTube2015 during installation in new UI... how can I install these plugins for old UI and where I can get them, because in old UI I have to install all plugins from STVI files not like in new UI they are installed automatically...

Google GSON by Slugger
version 1.7.1
Google's POJO <-> JSON library - dependency only
________________________________________________________

sagex-api - SageTV API Extensions by stuckless
jackson-core by stuckless
version 2.5.1.1
jackson-Core JSON library - dependency only
________________________________________________________

sagex-api - SageTV API Extensions by stuckless
version 7.1.9.26
SageTV API Wrappers with Remote
________________________________________________________

You Tube (2015) by tmiranda
version 0.06 Beta
Watch youtube videos again. Search, browse popular, create favorites, and ...
________________________________________________________

how can I make it work with old interface (STVs\SageTV3) of SageTV v7?

[Fuzzy]

Not without a LOT of work, most likely.

[tmiranda]

Originally Posted by Rob23

You are correct - I did have a typo. However, when attempting to update from within SageTV, I still get the error. I noticed the url to which you linked is secured (i.e. https) whereas the error I receive indicates it is attempting to pull from an http site.

Are you still experiencing this problem? I'm back from my vacation and will look at this later today.

[tmiranda]

Originally Posted by krasev

... how can I make it work with old interface (STVs\SageTV3) of SageTV v7?

It will not work with the old SageTV3 interface.

[Rob23]

Originally Posted by tmiranda

Are you still experiencing this problem? I'm back from my vacation and will look at this later today.

Yes. I still receive the failure message. Thank you. I hope your trip was enjoyed.

[tmiranda]

Originally Posted by Rob23

Yes. I still receive the failure message. Thank you. I hope your trip was enjoyed.

I did a bit of checking this AM and do not see why it's using https instead of http. The manifest I submitted uses http (unsecured). I will dig more into it later but in the mean time can you zip the file called SageTVPlugins.xml (that may not be the exact name, but it's close) found in the SageTV install directory and attach it here?

Also, make sure that you deleted the old development manifest called SageTVPluginsDev.xml. (Again, I may have the name slightly wrong.)

[Rob23]

Originally Posted by tmiranda

Also, make sure that you deleted the old development manifest called SageTVPluginsDev.xml. (Again, I may have the name slightly wrong.)

I'll check it this evening, but I suspect this may be the issue as I don't recall deleting any files when I installed the first official release, and I had been using the beta version. Thank you again.

[Rob23]

Originally Posted by tmiranda

I did a bit of checking this AM and do not see why it's using https instead of http. The manifest I submitted uses http (unsecured). I will dig more into it later but in the mean time can you zip the file called SageTVPlugins.xml (that may not be the exact name, but it's close) found in the SageTV install directory and attach it here?

Also, make sure that you deleted the old development manifest called SageTVPluginsDev.xml. (Again, I may have the name slightly wrong.)

I found and deleted the SageTVPluginsDev.xml file. I then attempted to update to v06, and received the error. However, this time it was http and not https.

I then uninstalled the plugin and attempted to reinstall. I received the same failure error. I am able to download the zip file directly, but I'm not sure how to install the plugin from the zip file (i.e. where to place the files).

Attached is the SageTVPlugins.xml file. I appreciate your help on this.

[tmiranda]

Rob,

I'm not sure why this is happening but you are not alone. I will work on it to track it down.

[tmiranda]

Originally Posted by Rob23

I found and deleted the SageTVPluginsDev.xml file. I then attempted to update to v06, and received the error. However, this time it was http and not https.

I then uninstalled the plugin and attempted to reinstall. I received the same failure error. I am able to download the zip file directly, but I'm not sure how to install the plugin from the zip file (i.e. where to place the files).

Attached is the SageTVPlugins.xml file. I appreciate your help on this.

What version of Windows are you running? Is it updated or not?

[Rob23]

Originally Posted by tmiranda

What version of Windows are you running? Is it updated or not?

Vista - yes it is is updated

[tmiranda]

Originally Posted by Rob23

Vista - yes it is is updated

One possibility is you are having an SSL issue. Look at the "Suggested Actions" on this security advisory and follow the instructions to disable SSL 3.0 on Internet Explorer.

https://technet.microsoft.com/en-us/...y/3009008.aspx

It can't hurt because you shouldn't be using SSLv3 anyway

If it fails again make sure you have debug logging turned on in SageTV and send me the logfile. That may give me more clues.

[Rob23]

Originally Posted by tmiranda

One possibility is you are having an SSL issue. Look at the "Suggested Actions" on this security advisory and follow the instructions to disable SSL 3.0 on Internet Explorer.

I'm not sure why that would be the issue unless SageTV is utilizing Internet Explorer. I don't utilize IE as a browser.

Is there a way for me to directly install the files in the zip file? I am able to download it outside of SageTV. Into what file directory should they be placed within SageTV?

Thank you again for your work on this.

[stuckless]

Originally Posted by Rob23

I'm not sure why that would be the issue unless SageTV is utilizing Internet Explorer. I don't utilize IE as a browser.

Is there a way for me to directly install the files in the zip file? I am able to download it outside of SageTV. Into what file directory should they be placed within SageTV?

Thank you again for your work on this.

What Java Version are you using for SageTV? Have you updated to Java 1.7, latest version?

[tmiranda]

Originally Posted by Rob23

I'm not sure why that would be the issue ..

Because I don't know what I'm talking about Do what stuckless has suggested and check your Java version.

Regarding updating directly, there are two ways:

First - Make sure all of the dependency libraries are installed: sagex-api, gson, jackson-core.

1. If you already have a (any) version of the plugin installed:
- Stop SageTV.
- Unzip youtube-dl.zip to the Sage install directory (where SageTV.exe is located).
- Unzip youtube-0.06 to the JARs directory.
- Unzip youtube-STVi.zip to the SageTV7 directory.
- Restart.

Doing this will cause Sage to complain because the files installed will not match what the plugin manager thinks you should have installed. It's not recommended but will mostly work. (I do this sometimes while testing.)

2. If you do not have any version installed:
- Follow the steps above.
- After restarting go to Setup->Detailed Setup->Advanced->Import UI Modification.
- Select "YouTube.stvi".

I think #2 is a better bet and would actually try that one first. If you do then make sure you uninstall the plugin before you begin.

The files can be found here: https://github.com/tmiranda1962/tmiranda/releases Make sure you use version 0.06. 0.07 is still under development.

Edit: I updated the instructions to be more accurate. FYI - You may want to wait a little while, I suspect version 0.07 will be ready in a day or two.