SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support
Forum Rules FAQs Community Downloads Today's Posts Search

Notices

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

Reply
 
Thread Tools Search this Thread Display Modes
  #701  
Old 04-02-2016, 10:15 AM
Greg2dot0's Avatar
Greg2dot0 Greg2dot0 is offline
Sage Advanced User
 
Join Date: Dec 2008
Posts: 82
I've done a bunch of recordings and all look good. I did have a small glitch when I first started my first recording after first starting the service yesterday and haven't seen it again. I'll continue to test recordings today.
__________________
Production SageTV Server: ASUS P8P67-Pro, 16gb RAM, Crucial m4 256GB SSD, Unbunto 16.4.04 LTS (Server x64), WDC Red 4TB
Capture: 1x HDHR Prime, 1x HDHomeRun (ClearQAM)
Clients: 1x HD300, 2x HD200, 2x Placeshifters
Reply With Quote
  #702  
Old 04-02-2016, 10:44 AM
troll5501 troll5501 is offline
Sage Advanced User
 
Join Date: Jun 2006
Posts: 136
Quote:
Originally Posted by EnterNoEscape View Post
It looks like the first attempt could not get everything it needed about the video. Unfortunately that's all FFmpeg. If it can't find the video dimensions, usually that means something is particularly interesting about the video stream which might be why you are having playback issues with the file that was produced. If you want to chop off a chunk of that file, or just upload the whole thing and make it available to me, I am interested in what's so special about that stream.
I'll PM you with a link to the file. Thanks!
__________________
Server: HP DL380 G6, VMware ESXi 5.0 with HW passthrough for USB and Firewire, 4 x HD-PVR, ZFS storage
SageTV: Production: 7.1.9+Java 1.6.0_32 on XP, Test: 9.0.4.291+Java 1.8.0_72 on Linux 64-bit
Clients: 2 x Sage HD200 Extender, 1 x Sage HD100 Extender
Sources: 4 x Motorola DCH-3200 (firewire channel changing), HD Homerun Prime, OpenDCT 0.5.7
Reply With Quote
  #703  
Old 04-02-2016, 11:07 AM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,657
Quote:
Originally Posted by Greg2dot0 View Post
I've done a bunch of recordings and all look good. I did have a small glitch when I first started my first recording after first starting the service yesterday and haven't seen it again. I'll continue to test recordings today.
By small glitch, you mean a second of the recording was lost or SageTV actually reported there was a problem?
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #704  
Old 04-02-2016, 12:41 PM
Greg2dot0's Avatar
Greg2dot0 Greg2dot0 is offline
Sage Advanced User
 
Join Date: Dec 2008
Posts: 82
Quote:
Originally Posted by EnterNoEscape View Post
By small glitch, you mean a second of the recording was lost or SageTV actually reported there was a problem?
I'm attaching the log. I installed RC7 about 10:00, on tuner 0, I started to record Good Morning Vietnam and had an error about 10:04:20, which actually caused a halt in the recording. The stream fix stops about 10:06:05

The file had multiple parts and an halt was posted to the SageTV System Message. Since then, I've not had that happen again

Code:
10:03:58.054 [SageTVTuningMonitor-52] INFO  SageTVTuningMonitor - 'DCT-HDHomeRun Prime Tuner 13142E5A-0' produced first 8010492 packets.
10:03:58.054 [SageTVTuningMonitor-52] INFO  SageTVTuningMonitor - 'DCT-HDHomeRun Prime Tuner 13142E5A-0' recorded first 7970448 bytes.
10:04:20.799 [FFmpegTransSageTVConsumerImpl-76:DCT-HDHomeRun Prime Tuner 13142E5A-1] WARN  mpegts - Last message repeated 23 times.
10:04:20.799 [FFmpegTransSageTVConsumerImpl-76:DCT-HDHomeRun Prime Tuner 13142E5A-1] WARN  mpegts - [0x7f22b006f360] PES packet size mismatch
10:04:58.522 [FFmpegTransSageTVConsumerImpl-106:DCT-HDHomeRun Prime Tuner 13142E5A-0] ERROR mpegts - Last message repeated 1 time.
10:04:58.523 [FFmpegTransSageTVConsumerImpl-106:DCT-HDHomeRun Prime Tuner 13142E5A-0] ERROR mpegts - [0x7f22c8035ce0] pts () < dts ((null)) in stream 0
10:04:58.523 [FFmpegTransSageTVConsumerImpl-106:DCT-HDHomeRun Prime Tuner 13142E5A-0] ERROR FFmpegTranscoder - Error from av_interleaved_write_frame: -22
Here's the entire log:
Attached Files
File Type: zip opendct.2016-04-01-2.zip (202.9 KB, 127 views)
__________________
Production SageTV Server: ASUS P8P67-Pro, 16gb RAM, Crucial m4 256GB SSD, Unbunto 16.4.04 LTS (Server x64), WDC Red 4TB
Capture: 1x HDHR Prime, 1x HDHomeRun (ClearQAM)
Clients: 1x HD300, 2x HD200, 2x Placeshifters
Reply With Quote
  #705  
Old 04-02-2016, 01:20 PM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,657
Quote:
Originally Posted by Greg2dot0 View Post
I'm attaching the log. I installed RC7 about 10:00, on tuner 0, I started to record Good Morning Vietnam and had an error about 10:04:20, which actually caused a halt in the recording. The stream fix stops about 10:06:05

The file had multiple parts and an halt was posted to the SageTV System Message. Since then, I've not had that happen again

Code:
10:03:58.054 [SageTVTuningMonitor-52] INFO  SageTVTuningMonitor - 'DCT-HDHomeRun Prime Tuner 13142E5A-0' produced first 8010492 packets.
10:03:58.054 [SageTVTuningMonitor-52] INFO  SageTVTuningMonitor - 'DCT-HDHomeRun Prime Tuner 13142E5A-0' recorded first 7970448 bytes.
10:04:20.799 [FFmpegTransSageTVConsumerImpl-76:DCT-HDHomeRun Prime Tuner 13142E5A-1] WARN  mpegts - Last message repeated 23 times.
10:04:20.799 [FFmpegTransSageTVConsumerImpl-76:DCT-HDHomeRun Prime Tuner 13142E5A-1] WARN  mpegts - [0x7f22b006f360] PES packet size mismatch
10:04:58.522 [FFmpegTransSageTVConsumerImpl-106:DCT-HDHomeRun Prime Tuner 13142E5A-0] ERROR mpegts - Last message repeated 1 time.
10:04:58.523 [FFmpegTransSageTVConsumerImpl-106:DCT-HDHomeRun Prime Tuner 13142E5A-0] ERROR mpegts - [0x7f22c8035ce0] pts () < dts ((null)) in stream 0
10:04:58.523 [FFmpegTransSageTVConsumerImpl-106:DCT-HDHomeRun Prime Tuner 13142E5A-0] ERROR FFmpegTranscoder - Error from av_interleaved_write_frame: -22
Here's the entire log:
The issue you ran into interestingly enough was for exactly the same reason troll5501 ran into a problem. You're not going to see it happen often since the channel needs to be wrapping around the dts. I'm working on fixing it, but FFmpeg really doesn't seem to understand what's going on when you limit the number to 33-bits yourself.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #706  
Old 04-03-2016, 06:12 AM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,657
Quote:
Originally Posted by troll5501 View Post
I'll PM you with a link to the file. Thanks!
I really couldn't find anything particularly broken with this recording. My best guess is SageTV detected it incorrectly. I was able to import it into SageTV and play it back on the Android miniclient and HD300. Sorry I can't really get you any closer to an answer on this one.


On an unrelated note. I was talking with some friends at a get together last night about the local commercials and apparently I'm not the only person to notice that the way they are inserting them isn't even playing nicely with the cable company boxes. There's lots of tearing and stuttering especially on H.264 Comcast. I looked into this a little more when I found an infomercial that looked horrible. I immediately captured the raw video to verify it wasn't something new to fix in OpenDCT and it turned out the video was really just that bad. It was an H.264 720p channel, so I know FiOS was transcoding it (the first time I've discovered this). At any rate, if that was my commercial and I'd be pretty upset with the cable company. I understand that sometimes it's the source content, but I really doubt anyone would submit a 30 minute video that did not playback decently before submitting it to the broadcaster. I don't have a problem with them saving bandwidth, but I do have a problem with them butchering my recordings in the process.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #707  
Old 04-03-2016, 06:22 AM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,657
OpenDCT 0.4.43-RC8


  • Java heap size is now defined at 128MB minimum and 768MB maximum.
  • Removed 33-bit corrections and improved decision making on what offset is the most correct.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #708  
Old 04-03-2016, 08:05 AM
KeithAbbott KeithAbbott is offline
Sage Icon
 
Join Date: Oct 2009
Location: Southeastern Michigan
Posts: 1,375
Quote:
Originally Posted by EnterNoEscape View Post
  • Java heap size is now defined at 128MB minimum and 768MB maximum.
For someone running OpenDCT in the same windows instance as the SageTV service, does OpenDCT have it's own Java heap, or would SageTV and OpenDCT share a single Java heap?
__________________
Server: MSI Z270 SLI Plus ATX Motherboard, Intel i7-7700T CPU, 32GB Memory, Unraid 6.11.5, sagetvopen-sagetv-server-opendct-java11 Docker (version 2.0.7)
Tuners: 2 x SiliconDust HDHomeRun Prime Cable TV Tuners, SiliconDust HDHomeRun CONNECT 4K OTA Tuner
Clients: Multiple HD300 Extenders, Multiple Fire TV Stick 4K Max w/MiniClient
Miscellaneous: Multiple Sony RM-VLZ620 Universal Remote Controls
Reply With Quote
  #709  
Old 04-03-2016, 08:49 AM
nyplayer nyplayer is offline
SageTVaholic
 
Join Date: Sep 2005
Posts: 4,997
Quote:
Originally Posted by KeithAbbott View Post
For someone running OpenDCT in the same windows instance as the SageTV service, does OpenDCT have it's own Java heap, or would SageTV and OpenDCT share a single Java heap?
OpenDCT is separate from SageTV and does not run within the SageTV Java Heap ... it has it's own.
__________________
Channels DVR UBUNTU Server 2 Primes 3 Connects TVE SageTV Docker with input from Channels DVR XMLTV and M3U VIA Opendct.
Reply With Quote
  #710  
Old 04-03-2016, 09:53 AM
jarredduq's Avatar
jarredduq jarredduq is offline
Sage Advanced User
 
Join Date: Mar 2009
Location: Stockton, CA - Most miserable city in the USA, SageTV makes it bearable
Posts: 201
Quote:
Originally Posted by EnterNoEscape View Post

  • Java heap size is now defined at 128MB minimum and 768MB maximum.
  • Removed 33-bit corrections and improved decision making on what offset is the most correct.
Thank you for your hard work trying to perfect this software.
__________________
Server: HP w/Intel i7-4770S CPU @ 3.10GHz , 500GB SSD, 16GB DDR3, Win 10 64-bit, 4TB of SSD for recording
SageTV: 9.2 - 64-Bit
Capture Devices: 2xHD Homerun Prime and HD-PVR (Comcast Premium/Music Channels)
Client 1, 2, 3, and 4: HD200.
NAS: Synology DS220+ 8TB (Movie Storage)
Sage Add-ons: Jetty, Neilms Webserver (Jetty), Mobile Web, Play-On Plug-in, Comskip Plug-in
Reply With Quote
  #711  
Old 04-03-2016, 11:54 AM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,657
Quote:
Originally Posted by jarredduq View Post
Thank you for your hard work trying to perfect this software.
Thanks! I especially find the timestamp discontinuity fixes absurd, but an unfortunate necessity. After playing around with different video from various providers, I'm starting to get the more complete picture of why so many need FFmpeg to even allow for even a really good player to be able to playback the video stream.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #712  
Old 04-03-2016, 09:09 PM
troll5501 troll5501 is offline
Sage Advanced User
 
Join Date: Jun 2006
Posts: 136
Quote:
Originally Posted by EnterNoEscape View Post
I really couldn't find anything particularly broken with this recording. My best guess is SageTV detected it incorrectly. I was able to import it into SageTV and play it back on the Android miniclient and HD300. Sorry I can't really get you any closer to an answer on this one.
So I have an idea of what may have happened here, and I think you are right, but unfortunately my SageTV logs have rotated enough that I lost Friday's log so we can't tell exactly what SageTV was doing.

OpenDCT tried to start the recording and it encountered the errors "avformat_open_input returned error code -1094995529" and it eventually closed the "<name>-0.ts" file (not sure if anything was ever written to it or if it was even created) and then it restarted the stream again successfully using the filename "<name>-1.ts" as expected. But today when I looked closer, there was no "<name>-0.ts" file on the filesystem, only the "<name>-1.ts" file which is the one you downloaded from me.

In SageTV under Recordings, I looked at the View Recording Detail screen and for Format it only showed "MPEG2-TS". I don't remember if it showed one filename or two. The following is what Sage logged when I looked at the details today and tried to play the recording. Note the "format=MPEG2-TS 0:00:00 0 kbps []":

Code:
sagetv_1.txt:Sun 4/3 12:50:30.630 [AsyncWatch@40a8eec7] watchThisFile=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 0:00:00 0 kbps [] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]]
sagetv_1.txt:Sun 4/3 12:50:30.802 [AsyncWatch@40a8eec7] VF.submitJob(VFJob[WatchMF r=0.0 t=0 file=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 0:00:00 0 kbps [] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]] ifn=null])
sagetv_1.txt:Sun 4/3 12:50:30.807 [VideoFrame-001d6a4bfae8@281bc614] VF processing job VFJob[WatchMF r=0.0 t=0 file=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 0:00:00 0 kbps [] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]] ifn=null] nPlayin=false
sagetv_1.txt:Sun 4/3 12:50:30.835 [VideoFrame-001d6a4bfae8@281bc614] VF processing on UI Thread VFJob[WatchMF r=0.0 t=0 file=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 0:00:00 0 kbps [] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]] ifn=null]
sagetv_1.txt:Sun 4/3 12:50:30.835 [VideoFrame-001d6a4bfae8@281bc614] VF processing job VFJob[LoadMF r=0.0 t=0 file=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 0:00:00 0 kbps [] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]] ifn=null] nPlayin=false
sagetv_1.txt:Sun 4/3 12:50:30.847 [VideoFrame-001d6a4bfae8@281bc614] VF processing on UI Thread VFJob[LoadMF r=0.0 t=0 file=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 0:00:00 0 kbps [] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]] ifn=null]
sagetv_1.txt:Sun 4/3 12:50:30.848 [VideoFrame-001d6a4bfae8@281bc614] VideoFrame creating new media player for file:MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 0:00:00 0 kbps [] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]]
sagetv_1.txt:Sun 4/3 12:50:30.858 [VideoFrame-001d6a4bfae8@281bc614] VF file=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 0:00:00 0 kbps [] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]] targetTime = Fri 4/1 19:00:16.212
sagetv_1.txt:Sun 4/3 12:50:30.858 [VideoFrame-001d6a4bfae8@281bc614] VideoFrame.timeSelected(Fri 4/1 19:00:16.212, true) currFile=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 0:00:00 0 kbps [] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]]
sagetv_1.txt:Sun 4/3 12:50:31.185 [VideoFrame-001d6a4bfae8@281bc614] Opened MPEG-2 TS file: /sagedata/MyRecordingFile-38187431-1.ts firstPTS=3610166766 durationMsec=12583388
sagetv_1.txt:Sun 4/3 12:50:31.449 [VideoFrame-001d6a4bfae8@281bc614] VideoFrame.timeSelected2(Fri 4/1 19:00:16.212, true) currFile=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 0:00:00 0 kbps [] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]] realDur=12583388
sagetv_1.txt:Sun 4/3 12:50:34.030 [VideoFrame-001d6a4bfae8@281bc614] VideoFrame.timeSelected(Fri 4/1 19:02:48.174, true) currFile=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 0:00:00 0 kbps [] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]]
sagetv_1.txt:Sun 4/3 12:50:34.030 [VideoFrame-001d6a4bfae8@281bc614] VideoFrame.timeSelected2(Fri 4/1 19:02:48.174, true) currFile=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 0:00:00 0 kbps [] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]] realDur=12583388
sagetv_1.txt:Sun 4/3 12:50:35.297 [VideoFrame-001d6a4bfae8@281bc614] VideoFrame.timeSelected(Fri 4/1 19:02:49.444, true) currFile=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 0:00:00 0 kbps [] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]]
sagetv_1.txt:Sun 4/3 12:50:35.297 [VideoFrame-001d6a4bfae8@281bc614] VideoFrame.timeSelected2(Fri 4/1 19:02:49.444, true) currFile=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 0:00:00 0 kbps [] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]] realDur=12583388
But then I restarted SageTV, and then that same recording was detected properly and played fine:

Code:
sagetv_0.txt:Sun 4/3 18:34:39.254 [Ministry@4325df72] Doing pre-emptive file format detection on recording MediaFile..../sagedata/MyRecordingFile-38187431-1.ts
sagetv_0.txt:Sun 4/3 18:34:39.274 [Ministry@4325df72] Using internal format detector first for: /sagedata/MyRecordingFile-38187431-1.ts
sagetv_0.txt:Sun 4/3 18:34:39.398 [Ministry@4325df72] File Format Parsed-2a /sagedata/MyRecordingFile-38187431-1.ts=MPEG2-TS 3:29:42 3701 kbps [#0 Video[MPEG2-Video 29.97003 fps 1920x1080 16:9 interlaced id=0100]#1 Audio[AC3 48000 Hz 6 channels 384 kbps MAIN idx=1 id=0101 eng]#2 Audio[AC3 48000 Hz 2 channels 192 kbps idx=2 id=0102 spa]]
sagetv_0.txt:Sun 4/3 18:34:39.416 [Ministry@4325df72] File Format Parsed-2b /sagedata/MyRecordingFile-38187431-1.ts=MPEG2-TS 3:29:42 3701 kbps [#0 Video[MPEG2-Video 29.97003 fps 1920x1080 16:9 interlaced id=0100]#1 Audio[AC3 48000 Hz 6 channels 384 kbps MAIN idx=1 id=0101 eng]#2 Audio[AC3 48000 Hz 2 channels 192 kbps idx=2 id=0102 spa]]
sagetv_0.txt:Sun 4/3 18:43:13.117 [AsyncWatch@7afb8c12] watchThisFile=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 3:29:42 3701 kbps [#0 Video[MPEG2-Video 29.97003 fps 1920x1080 16:9 interlaced id=0100]#1 Audio[AC3 48000 Hz 6 channels 384 kbps MAIN idx=1 id=0101 eng]#2 Audio[AC3 48000 Hz 2 channels 192 kbps idx=2 id=0102 spa]] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]]
sagetv_0.txt:Sun 4/3 18:43:13.117 [AsyncWatch@7afb8c12] VF.submitJob(VFJob[WatchMF r=0.0 t=0 file=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 3:29:42 3701 kbps [#0 Video[MPEG2-Video 29.97003 fps 1920x1080 16:9 interlaced id=0100]#1 Audio[AC3 48000 Hz 6 channels 384 kbps MAIN idx=1 id=0101 eng]#2 Audio[AC3 48000 Hz 2 channels 192 kbps idx=2 id=0102 spa]] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]] ifn=null])
sagetv_0.txt:Sun 4/3 18:43:13.118 [VideoFrame-001d6a4bfae8@661ccc20] VF processing job VFJob[WatchMF r=0.0 t=0 file=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 3:29:42 3701 kbps [#0 Video[MPEG2-Video 29.97003 fps 1920x1080 16:9 interlaced id=0100]#1 Audio[AC3 48000 Hz 6 channels 384 kbps MAIN idx=1 id=0101 eng]#2 Audio[AC3 48000 Hz 2 channels 192 kbps idx=2 id=0102 spa]] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]] ifn=null] nPlayin=false
sagetv_0.txt:Sun 4/3 18:43:13.118 [VideoFrame-001d6a4bfae8@661ccc20] VF processing on UI Thread VFJob[WatchMF r=0.0 t=0 file=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 3:29:42 3701 kbps [#0 Video[MPEG2-Video 29.97003 fps 1920x1080 16:9 interlaced id=0100]#1 Audio[AC3 48000 Hz 6 channels 384 kbps MAIN idx=1 id=0101 eng]#2 Audio[AC3 48000 Hz 2 channels 192 kbps idx=2 id=0102 spa]] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]] ifn=null]
sagetv_0.txt:Sun 4/3 18:43:13.126 [VideoFrame-001d6a4bfae8@661ccc20] VF processing job VFJob[LoadMF r=0.0 t=0 file=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 3:29:42 3701 kbps [#0 Video[MPEG2-Video 29.97003 fps 1920x1080 16:9 interlaced id=0100]#1 Audio[AC3 48000 Hz 6 channels 384 kbps MAIN idx=1 id=0101 eng]#2 Audio[AC3 48000 Hz 2 channels 192 kbps idx=2 id=0102 spa]] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]] ifn=null] nPlayin=false
sagetv_0.txt:Sun 4/3 18:43:13.126 [VideoFrame-001d6a4bfae8@661ccc20] VF processing on UI Thread VFJob[LoadMF r=0.0 t=0 file=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 3:29:42 3701 kbps [#0 Video[MPEG2-Video 29.97003 fps 1920x1080 16:9 interlaced id=0100]#1 Audio[AC3 48000 Hz 6 channels 384 kbps MAIN idx=1 id=0101 eng]#2 Audio[AC3 48000 Hz 2 channels 192 kbps idx=2 id=0102 spa]] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]] ifn=null]
sagetv_0.txt:Sun 4/3 18:43:13.126 [VideoFrame-001d6a4bfae8@661ccc20] VideoFrame creating new media player for file:MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 3:29:42 3701 kbps [#0 Video[MPEG2-Video 29.97003 fps 1920x1080 16:9 interlaced id=0100]#1 Audio[AC3 48000 Hz 6 channels 384 kbps MAIN idx=1 id=0101 eng]#2 Audio[AC3 48000 Hz 2 channels 192 kbps idx=2 id=0102 spa]] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]]
sagetv_0.txt:Sun 4/3 18:43:13.126 [VideoFrame-001d6a4bfae8@661ccc20] VF file=MediaFile[id=38397783 A[38187431,38185217,"My Show",32571@0401.19:00,150,T] mask=TV host=sagelinux encodedBy=DCT-HDHomeRun Prime Tuner 13191941-2 on 127.0.0.1:9000 CSNPHHD format=MPEG2-TS 3:29:42 3701 kbps [#0 Video[MPEG2-Video 29.97003 fps 1920x1080 16:9 interlaced id=0100]#1 Audio[AC3 48000 Hz 6 channels 384 kbps MAIN idx=1 id=0101 eng]#2 Audio[AC3 48000 Hz 2 channels 192 kbps idx=2 id=0102 spa]] /sagedata/MyRecordingFile-38187431-1.ts, Seg0[Fri 4/1 19:00:16.212-Fri 4/1 22:30:00.006]] targetTime = Fri 4/1 19:00:16.212
So it seems like the initial recording failure (first file) made SageTV detect the recording as flawed and it cached that result without checking again, even though the second attempt (second file) was a good recording. I really wish I had the SageTV log to show what it was doing, because I don't know if this was an issue with OpenDCT or SageTV.

I'm guessing maybe one of these things happened: (1) SageTV deleted the first file at some point but it seems strange that it would delete one piece of a recording, or (2) OpenDCT never actually created the first file which could have confused SageTV, or (3) OpenDCT created the first file and notified SageTV but then deleted it because the stream was never detected properly which also could have confused SageTV. SageTV did detect the event as a halted recording and put a message into the System Messages log but the time only shows 7:00PM.
__________________
Server: HP DL380 G6, VMware ESXi 5.0 with HW passthrough for USB and Firewire, 4 x HD-PVR, ZFS storage
SageTV: Production: 7.1.9+Java 1.6.0_32 on XP, Test: 9.0.4.291+Java 1.8.0_72 on Linux 64-bit
Clients: 2 x Sage HD200 Extender, 1 x Sage HD100 Extender
Sources: 4 x Motorola DCH-3200 (firewire channel changing), HD Homerun Prime, OpenDCT 0.5.7

Last edited by troll5501; 04-03-2016 at 09:16 PM.
Reply With Quote
  #713  
Old 04-03-2016, 09:38 PM
troll5501 troll5501 is offline
Sage Advanced User
 
Join Date: Jun 2006
Posts: 136
I also noticed on 0.4.43 a minor issue related to the recent change for repeated log entries. The count and "time" vs "times" output appears to be misformatted:

Code:
21:03:35.108 [FFmpegTransSageTVConsumerImpl-377:DCT-HDHomeRun Prime Tuner 13191941-2] WARN  mpegts - Repeated [0x7f04e41542c0] PES packet size mismatch time1: .
21:55:23.042 [FFmpegTransSageTVConsumerImpl-474:DCT-HDHomeRun Prime Tuner 13191941-0] WARN  mpegts - Repeated [0x7f04e4fe7720] PES packet size mismatch time5: s.
22:12:42.193 [FFmpegTransSageTVConsumerImpl-377:DCT-HDHomeRun Prime Tuner 13191941-2] WARN  mpegts - Repeated [0x7f04e50fd8a0] PES packet size mismatch time5: s.
22:17:34.854 [FFmpegTransSageTVConsumerImpl-474:DCT-HDHomeRun Prime Tuner 13191941-0] WARN  mpegts - Repeated [0x7f04e4fe7720] PES packet size mismatch time2: s.
22:17:35.041 [FFmpegTransSageTVConsumerImpl-377:DCT-HDHomeRun Prime Tuner 13191941-2] WARN  mpegts - Repeated [0x7f04e50fd8a0] PES packet size mismatch time1: .
22:32:23.205 [FFmpegTransSageTVConsumerImpl-474:DCT-HDHomeRun Prime Tuner 13191941-0] WARN  mpegts - Repeated [0x7f04e4fe7720] PES packet size mismatch time3: s.
22:47:57.952 [FFmpegTransSageTVConsumerImpl-377:DCT-HDHomeRun Prime Tuner 13191941-2] WARN  mpegts - Repeated [0x7f04e50fd8a0] PES packet size mismatch time1: .
23:09:16.363 [FFmpegTransSageTVConsumerImpl-377:DCT-HDHomeRun Prime Tuner 13191941-2] WARN  mpegts - Repeated [0x7f04e50fd8a0] PES packet size mismatch time1: .
23:09:23.511 [FFmpegTransSageTVConsumerImpl-474:DCT-HDHomeRun Prime Tuner 13191941-0] WARN  mpegts - Repeated [0x7f04e4fe7720] PES packet size mismatch time1: .
23:09:23.620 [FFmpegTransSageTVConsumerImpl-377:DCT-HDHomeRun Prime Tuner 13191941-2] WARN  mpegts - Repeated [0x7f04e50fd8a0] PES packet size mismatch time1: .
It looks like the variables are out of order in the logger.log() call.
__________________
Server: HP DL380 G6, VMware ESXi 5.0 with HW passthrough for USB and Firewire, 4 x HD-PVR, ZFS storage
SageTV: Production: 7.1.9+Java 1.6.0_32 on XP, Test: 9.0.4.291+Java 1.8.0_72 on Linux 64-bit
Clients: 2 x Sage HD200 Extender, 1 x Sage HD100 Extender
Sources: 4 x Motorola DCH-3200 (firewire channel changing), HD Homerun Prime, OpenDCT 0.5.7
Reply With Quote
  #714  
Old 04-03-2016, 11:09 PM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,657
Quote:
Originally Posted by troll5501 View Post
I also noticed on 0.4.43 a minor issue related to the recent change for repeated log entries. The count and "time" vs "times" output appears to be misformatted:

Code:
21:03:35.108 [FFmpegTransSageTVConsumerImpl-377:DCT-HDHomeRun Prime Tuner 13191941-2] WARN  mpegts - Repeated [0x7f04e41542c0] PES packet size mismatch time1: .
21:55:23.042 [FFmpegTransSageTVConsumerImpl-474:DCT-HDHomeRun Prime Tuner 13191941-0] WARN  mpegts - Repeated [0x7f04e4fe7720] PES packet size mismatch time5: s.
22:12:42.193 [FFmpegTransSageTVConsumerImpl-377:DCT-HDHomeRun Prime Tuner 13191941-2] WARN  mpegts - Repeated [0x7f04e50fd8a0] PES packet size mismatch time5: s.
22:17:34.854 [FFmpegTransSageTVConsumerImpl-474:DCT-HDHomeRun Prime Tuner 13191941-0] WARN  mpegts - Repeated [0x7f04e4fe7720] PES packet size mismatch time2: s.
22:17:35.041 [FFmpegTransSageTVConsumerImpl-377:DCT-HDHomeRun Prime Tuner 13191941-2] WARN  mpegts - Repeated [0x7f04e50fd8a0] PES packet size mismatch time1: .
22:32:23.205 [FFmpegTransSageTVConsumerImpl-474:DCT-HDHomeRun Prime Tuner 13191941-0] WARN  mpegts - Repeated [0x7f04e4fe7720] PES packet size mismatch time3: s.
22:47:57.952 [FFmpegTransSageTVConsumerImpl-377:DCT-HDHomeRun Prime Tuner 13191941-2] WARN  mpegts - Repeated [0x7f04e50fd8a0] PES packet size mismatch time1: .
23:09:16.363 [FFmpegTransSageTVConsumerImpl-377:DCT-HDHomeRun Prime Tuner 13191941-2] WARN  mpegts - Repeated [0x7f04e50fd8a0] PES packet size mismatch time1: .
23:09:23.511 [FFmpegTransSageTVConsumerImpl-474:DCT-HDHomeRun Prime Tuner 13191941-0] WARN  mpegts - Repeated [0x7f04e4fe7720] PES packet size mismatch time1: .
23:09:23.620 [FFmpegTransSageTVConsumerImpl-377:DCT-HDHomeRun Prime Tuner 13191941-2] WARN  mpegts - Repeated [0x7f04e50fd8a0] PES packet size mismatch time1: .
It looks like the variables are out of order in the logger.log() call.
You're right. I don't know how I missed that.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #715  
Old 04-03-2016, 11:17 PM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,657
Quote:
Originally Posted by troll5501 View Post
OpenDCT tried to start the recording and it encountered the errors "avformat_open_input returned error code -1094995529" and it eventually closed the "<name>-0.ts" file (not sure if anything was ever written to it or if it was even created) and then it restarted the stream again successfully using the filename "<name>-1.ts" as expected. But today when I looked closer, there was no "<name>-0.ts" file on the filesystem, only the "<name>-1.ts" file which is the one you downloaded from me.
Based on what I saw in your log, FFmpeg wasn't able to detect the video dimensions after over 20MB of data. I never understand what's going on when that kind of thing happens. The -0.ts file is created the instant the consumer knows what the file will be which is fairly early in the tuning process. Since detection never succeeded, the file never grew beyond 0 bytes.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #716  
Old 04-04-2016, 10:33 AM
jarredduq's Avatar
jarredduq jarredduq is offline
Sage Advanced User
 
Join Date: Mar 2009
Location: Stockton, CA - Most miserable city in the USA, SageTV makes it bearable
Posts: 201
Since updating to RC8, recordings of Bravo channel are unwatchable. Let me know what you need to troubleshoot this problem. For now I've remapped that channel to record through my HDPVR, so I'm not dead on the water.
__________________
Server: HP w/Intel i7-4770S CPU @ 3.10GHz , 500GB SSD, 16GB DDR3, Win 10 64-bit, 4TB of SSD for recording
SageTV: 9.2 - 64-Bit
Capture Devices: 2xHD Homerun Prime and HD-PVR (Comcast Premium/Music Channels)
Client 1, 2, 3, and 4: HD200.
NAS: Synology DS220+ 8TB (Movie Storage)
Sage Add-ons: Jetty, Neilms Webserver (Jetty), Mobile Web, Play-On Plug-in, Comskip Plug-in
Reply With Quote
  #717  
Old 04-04-2016, 11:49 AM
waylo waylo is offline
Sage Advanced User
 
Join Date: Feb 2006
Posts: 238
Thank you EnterNoEscape for your tireless updates on this project.

Just as an update, for me on my Comcast system, with the majority of channels (excepting major networks still on mpeg) with H264, I haven't had ANY hiccups for a while. As mentioned initially several pages back, the music stations won't play properly for the reasons you already explained, and I will await patiently if you choose to implement channel-dependent consumers in later builds.
__________________

Server: SageTV 9.2.6x64 on Win10 x64 Home, i7-2600, 8gb RAM, OpenDCT, Java 1.8, 20TB storage
Display: EVGA GT 1030 fanless to Sony LED TV via DVI-HDMI
Capture Devices: HDHR Prime for Comcast, HDHR Dual for OTA (retired)
Clients: Nvidia Shield Android miniclient

Last edited by waylo; 04-04-2016 at 11:56 AM.
Reply With Quote
  #718  
Old 04-04-2016, 12:42 PM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,657
Quote:
Originally Posted by jarredduq View Post
Since updating to RC8, recordings of Bravo channel are unwatchable. Let me know what you need to troubleshoot this problem. For now I've remapped that channel to record through my HDPVR, so I'm not dead on the water.
Can you get me a raw clip of what you're seeing. Put the following URL into a browser. You'll need to figure out what the IP address of one of your HDHomeRuns is and put whatever the Bravo channel is for you in there directly next to the v. I think I know what's happening, but I would like to see it for myself.

http://<device_ip>:5004/auto/v<bravo_channel>?duration=120
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #719  
Old 04-04-2016, 12:46 PM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,657
Quote:
Originally Posted by waylo View Post
Thank you EnterNoEscape for your tireless updates on this project.

Just as an update, for me on my Comcast system, with the majority of channels (excepting major networks still on mpeg) with H264, I haven't had ANY hiccups for a while. As mentioned initially several pages back, the music stations won't play properly for the reasons you already explained, and I will await patiently if you choose to implement channel-dependent consumers in later builds.
I have worked on that a little, but I don't want to put anything new into the mix until we get the current version to stable.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #720  
Old 04-04-2016, 05:21 PM
jarredduq's Avatar
jarredduq jarredduq is offline
Sage Advanced User
 
Join Date: Mar 2009
Location: Stockton, CA - Most miserable city in the USA, SageTV makes it bearable
Posts: 201
Quote:
Originally Posted by EnterNoEscape View Post
Can you get me a raw clip of what you're seeing. Put the following URL into a browser. You'll need to figure out what the IP address of one of your HDHomeRuns is and put whatever the Bravo channel is for you in there directly next to the v. I think I know what's happening, but I would like to see it for myself.

http://<device_ip>:5004/auto/v<bravo_channel>?duration=120
Uploaded file to Google Drive: https://drive.google.com/file/d/0ByM...ew?usp=sharing
__________________
Server: HP w/Intel i7-4770S CPU @ 3.10GHz , 500GB SSD, 16GB DDR3, Win 10 64-bit, 4TB of SSD for recording
SageTV: 9.2 - 64-Bit
Capture Devices: 2xHD Homerun Prime and HD-PVR (Comcast Premium/Music Channels)
Client 1, 2, 3, and 4: HD200.
NAS: Synology DS220+ 8TB (Movie Storage)
Sage Add-ons: Jetty, Neilms Webserver (Jetty), Mobile Web, Play-On Plug-in, Comskip Plug-in
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ATI TV Wonder Digital Cable Tuner & SageTV nyle Hardware Support 4 02-17-2009 10:12 PM
ATI TV Wonder Digital Cable Tuner rajczi Hardware Support 4 01-14-2008 08:24 PM
ATI TV Wonder™ Digital Cable Tuner dadams Hardware Support 4 01-09-2007 10:55 AM
Digital Cable - one guide - need HD on one tuner reg tv on other Kimper SageTV Beta Test Software 14 11-27-2006 08:15 PM
Multi-tuner Digital Cable mlbdude SageTV Software 0 06-26-2003 01:08 PM


All times are GMT -6. The time now is 05:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.