|
SageTV Clients Development This forum is for discussions relating to SageTV Open Source Clients Development. |
|
Thread Tools | Search this Thread | Display Modes |
#481
|
||||
|
||||
Quote:
That's a little-used feature (for me, anyway) that I only discovered not that long ago, and it never occurred to me to try it with the miniclient, so thanks for the suggestion. That's a lot easier than trying my old bluetooth keyboard.
__________________
----- AMD Ryzen 5 3600, B450 m/b, 32Gig, lots of disks, Unraid, 2x HDPVR2 tuners, HDHomeRun Prime, HDHomeRun HDHR4 OTA, Windows Live Tuner, SageTV docker, OpenDCT docker, Win8.1 VM, EventGhost |
#482
|
|||
|
|||
There is also a separate Mobile web client that was developed a long time ago, before phones got larger screens. But it may not work anymore.
That is fine since the main web UI works fine on phones with larger screens and is very usable, including the page for the web UI remote. I wouldn't want to use that all of the time, but to change the occasional setting it works pretty well.
__________________
New Server - Sage9 on unRAID 2xHD-PVR, HDHR for OTA Old Server - Sage7 on Win7Pro-i660CPU with 4.6TB, HD-PVR, HDHR OTA, HVR-1850 OTA Clients - 2xHD-300, 8xHD-200 Extenders, Client+2xPlaceshifter and a WHS which acts as a backup Sage server |
#483
|
||||
|
||||
Maybe I'm stupid, okay that's a given, but I don't see an Options button on the web remote and none of the keys available will pop up the options menu. Looks like I may have to try a bluetooth keyboard after all.
__________________
----- AMD Ryzen 5 3600, B450 m/b, 32Gig, lots of disks, Unraid, 2x HDPVR2 tuners, HDHomeRun Prime, HDHomeRun HDHR4 OTA, Windows Live Tuner, SageTV docker, OpenDCT docker, Win8.1 VM, EventGhost |
#484
|
|||
|
|||
This is the URI that would do the command. You can try it from a browser, not sure if the button is on the web page. You need to enter your own username, password, server IP address, server port and the context is the MAC ID of the extender.
http://user:password@192.168.1.99:70...ommand=Options Code:
http://user:password@192.168.1.99:7070/sage/SageCommand?context=001d6a4cf581&command=Options
__________________
New Server - Sage9 on unRAID 2xHD-PVR, HDHR for OTA Old Server - Sage7 on Win7Pro-i660CPU with 4.6TB, HD-PVR, HDHR OTA, HVR-1850 OTA Clients - 2xHD-300, 8xHD-200 Extenders, Client+2xPlaceshifter and a WHS which acts as a backup Sage server Last edited by wayner; 11-28-2020 at 03:45 PM. |
#485
|
|||
|
|||
What do you mean by options it is there on the main menu what is it that you do not see? If you long press the select the options is there. The hamburger Icon. There is also an AndroidTV APP you can download from play store. You can pair with your Android box.
__________________
Channels DVR UBUNTU Server 2 Primes 3 Connects TVE SageTV Docker with input from Channels DVR XMLTV and M3U VIA Opendct. Last edited by nyplayer; 11-27-2020 at 07:46 PM. |
#486
|
||||
|
||||
Quote:
I was able to use the link that wayner sent to display the menu, but for some reason the miniclient started freezing up shortly after I start it. I'll keep working on it though.
__________________
----- AMD Ryzen 5 3600, B450 m/b, 32Gig, lots of disks, Unraid, 2x HDPVR2 tuners, HDHomeRun Prime, HDHomeRun HDHR4 OTA, Windows Live Tuner, SageTV docker, OpenDCT docker, Win8.1 VM, EventGhost |
#487
|
|||
|
|||
I have a Fire TV Stick 4K device loaded with the SageTV MiniClient. If I am watching a "live" television show, what do I press on the remote to stop watching/recording? Pressing the play/pause button only pauses the show, I want the recording to stop.
__________________
Server: MSI Z270 SLI Plus ATX Motherboard, Intel i7-7700T CPU, 32GB Memory, Unraid 6.11.5, sagetvopen-sagetv-server-opendct-java11 Docker (version 2.0.7) Tuners: 2 x SiliconDust HDHomeRun Prime Cable TV Tuners, SiliconDust HDHomeRun CONNECT 4K OTA Tuner Clients: Multiple HD300 Extenders, Multiple Fire TV Stick 4K Max w/MiniClient Miscellaneous: Multiple Sony RM-VLZ620 Universal Remote Controls |
#488
|
|||
|
|||
long press select and a menu will popup with all the keys including stop.
__________________
Channels DVR UBUNTU Server 2 Primes 3 Connects TVE SageTV Docker with input from Channels DVR XMLTV and M3U VIA Opendct. |
#489
|
|||
|
|||
So it's on the latest 1.7.0, tried the ffmpeg audio extension option and it's still bad. If I disable that, though, I get no audio - otherwise the audio becomes a buzzing noise, almost as if it's playing it back at the wrong audio frequency.
|
#490
|
|||
|
|||
Josh,
This is amazing work. I will be donating shortly for sure. I used the Android Client for my pair of Amazon Firesticks with no issue. I recently got a pair of Nvidia Shield TV Pros that I also installed the app on. Everything works great and importing the settings was a breeze. However, I did notice that on the Shields, the text in my Gemstone flows are slightly getting cut off. Its not much but it makes "T" and "7" look weird. I only notice it on the Shields. The Firesticks and my PCs do not have this issue. The Gemstone flow I'm using is Dual. I also see it happening in my TV show flows. If this is something that can be fixed/set on my end, please let me know and I'll get to it. Thanks again! |
#491
|
||||
|
||||
Quote:
Some things I would try. There are two rendering engines. Try with OpenGL on and off and see if that makes a difference. Double check the overscan settings in SageTV to make sure it is not trying to scale down the UI. Interesting that it looks different on those two devices!
__________________
Projects I am currently maintaining SageTV Andoid Client Media Format Parser Plugin JavaFFmpegLibrary SageTVTranscoder If you like the work I am doing and would like to support it you can become a Patreon member. |
#492
|
|||
|
|||
Quote:
Where do I check the overscan settings? Is that different than the overscan during general setup? If its that where we set the upper left and lower right, then those are ok. |
#493
|
||||
|
||||
Quote:
Here's what I'd try... Remove the app (or just go in a clear all storage setting for the app) Install the app Go through the default SageTV configuration (ie, launch sagetv, and since all data was removed you'll be starting over in terms of having to configure it). Take note as you going through the configuration looking for T and 7 to see if the have the issues. - do you see the same font issues? Load gemstone UI, but don't configure it - do you see the same font issues? Configure gemstone - do you see the same font issues? Basically just trying to determine at which stage the problem is occurring. You are not sharing the client properties on the sagetv server, correct? (if you don't know what that means, the answer is probably no) I'll explain a little bit about how fonts are managed on the Placeshifter, HD300, Android MiniClient. Fonts are rendered on the Server as bitmaps and then sent across to the client. So while a font might start out as a TTF, font characters from a client's point of view are treated as images. Thie images are cached on the client since they'll be requested MANY times, but it's also why when you see it rendered incorrectly once, it's likely it'll be rendered that way forever. If fonts change on the server, these changes may not make it a client until the client's cache is cleared.
__________________
Batch Metadata Tools (User Guides) - SageTV App (Android) - SageTV Plex Channel - My Other Android Apps - sagex-api wrappers - Google+ - Phoenix Renamer Downloads SageTV V9 | Android MiniClient |
#494
|
|||
|
|||
Quote:
Thanks for your help. EDIT: I did a re-install of the app. After going through the initial setup, I didn't change anything and went straight to videos. The effect on the text is there. You can see it for all the movies listed in the image below. I did the same thing on one of the Firestick 4Ks with a fresh install and there were no issues. If its something that can't be fixed immediately or fixed at all, thats ok. Its definitely not a show stopper for me as we can still read the titles. Last edited by t4runnr; 12-18-2020 at 07:56 AM. |
#495
|
||||
|
||||
Quote:
Thanks, Josh
__________________
Projects I am currently maintaining SageTV Andoid Client Media Format Parser Plugin JavaFFmpegLibrary SageTVTranscoder If you like the work I am doing and would like to support it you can become a Patreon member. |
#496
|
||||
|
||||
Quote:
__________________
Projects I am currently maintaining SageTV Andoid Client Media Format Parser Plugin JavaFFmpegLibrary SageTVTranscoder If you like the work I am doing and would like to support it you can become a Patreon member. |
#497
|
|||
|
|||
Quote:
EDIT: That didn't work. Again, I appreciate the help in troubleshooting this. EDIT #2 - 21Dec: So weird but it’s fixed now. I didn’t do anything. But it’s all fixed now. Go figure. Maybe something to do with the cache? Last edited by t4runnr; 12-21-2020 at 07:30 AM. |
#498
|
|||
|
|||
Very pleased overall with the client on the Firestick 4K; it's made watching from a low bandwidth remote location pleasurable.
The only issue I've been seeing is that from time-to-time the client hangs up and I have to 'TeamViewer' into the server and cycle SageTV Service to get it to release. Nearly always, it hangs at the 'Connecting to the <my server name> Server', although it's happened at other times as well. I suspected it was caused by my slow remote DSL bandwidth but I've recently upgraded to a cable-supported 10Mbs service and it is still happening. Maybe that's still too slow, but wondering if there's another fix.
__________________
Server: Intel i5-11400 @4.4GHz 6 cores Windows10 Pro, Sage 9.2.6.976, Comskip Donators Capture: Fubo/TVEverywhere/ChannelsDVR/OpenDCT_0.5.32_x86. Storage: 120gB SSD, 4tB HD on Server Network: gB Lan Playback: FireStick 4K miniclient Tech Level: Hobbyist |
#499
|
||||
|
||||
Quote:
__________________
Projects I am currently maintaining SageTV Andoid Client Media Format Parser Plugin JavaFFmpegLibrary SageTVTranscoder If you like the work I am doing and would like to support it you can become a Patreon member. |
#500
|
|||
|
|||
Fire Stick 4K + Exoplayer without OpenDCT
It's exciting to see this client approach the level of replacing HD300! Thanks to all for their contributions. I've seen a few others upthread with same issue as mine, but without any replies.
I have 1.7.0 working with MPEG2 OTA streams on Fire Stick 4K only when Exoplayer is disabled. I also have the first MPEG2 hardware decoder (OMX.MTK.VIDEO.DECODER.MPEG2) unchecked. This works reasonably okay. It seems most in this thread are using OpenDCT to fix the MPEG2 container in order to successfully use Exoplayer. Since I use internal an PCI capture card I don't think OpenDCT is an option for me (it didn't discover my cards when I tried.) Is there any way to enable the same streamfix when using an internal capture card as what OpenDCT is doing? Is there any way to disable a specific hardware codec for Exoplayer in the same way IJK allows it? I suspect I'd be all set if either of the ideas above are possible - and others who don't have HDHRs. Thanks! |
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SageTV MiniClient for Android Indiegogo Campaign (Thanks) | stuckless | SageTV Clients Development | 14 | 09-18-2022 07:15 AM |
Android MiniClient 1.4.3 | stuckless | SageTV Clients Development | 20 | 03-25-2019 10:32 AM |
Android MiniClient 1.2.9 | stuckless | SageTV Clients Development | 53 | 04-16-2018 07:30 AM |
Android Miniclient and UK TV | rickgillyon | SageTV Clients Development | 6 | 12-01-2016 05:58 PM |
Android Miniclient on Mi Box Crashing SageTV Server v9 | mackb | SageTV Clients Development | 9 | 11-27-2016 07:28 PM |