Sage Client...problems

[MiGster]

Sorry some of this is in caps, I didn't look up for awhile and I found my caps on and did't feel like writing the whole thing over.

I own sage tv version 6 and just installed sage client (trial install). Sage tv is working great off of the main tv (server) which sage is installed on. The client is installed on another pc which is on the wired network. I have checked all firewall settings in windows xp and all the right ports are open. When I use client on the other machine it connects to the server initially, after about 2-3 minutes the client says it lost the server connection and is trying to reconnect, usually to no avail. I have tried different decoders and such. I'm using VMR9, FSE, Nvidia decoders, it doesn't matter if I'm watching HD or not. I shut down my virus software before using Sage on both machines. I do have nielm/webserver add-on installed so Meedio can connect and import my recorded shows. I do use a Linksys router on the network for internet sharing, I believe I've opened the required ports on the router correctly. I have read all the FAQ. What else could I be missing? This would be great if I could get this to work and stay connected. Any thoughts would be great. I'm not opposed to uninstalling and re-installing if I need to????

[Opus4]

Originally Posted by MiGster

Sorry some of this is in caps, I didn't look up for awhile and I found my caps on and did't feel like writing the whole thing over.

I had a hard time reading it, so a few seonds using Word's Format -> Change Case helped.

When I use client on the other machine it connects to the server initially, after about 2-3 minutes the client says it lost the server connection and is trying to reconnect, usually to no avail.

If it is initially connected & you see the SageTV interface, it sounds like the SageTV settings should be fine. You could try enabling debug logging on both the server and client to see if the logs might give any hints as to what is happening.

- Andy

[MiGster]

I think I attached these debug txt files correctly. Can anyone see aproblem from reading the information in these?

[Opus4]

Try contacting support to see if they see anything going on in the logs.

- Andy