|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
What hardware/chassi good for SageTV Client with 1080p?
Hello,
I very interesting to build slim and silent (with micro ATX board) SageTV Client hardware that able to play 1080p content. Any body can recomend chassi, motherboard, CPU, fan, power supply to build relative cheap slim (up to 75mm) hardware to play 1080p. As I undestand the best current chipset is AMD 780G correct me if i am wrong. thanks in advance.
__________________
Dear Google, Please don't ruin SageTV for us!! Sage Server: [s]8xDVB-S2 with DVBE4Sage on YES DBS Israel 4W (3 virtual tuners) ,[/s] 3 x HD300 Extenders; 3 x HD200 Extender; 3 x SageTV Client; |
#2
|
|||
|
|||
I did something similar, using
Silverstone LC02 chassis (100mm tall) Silverstone NT-07 CPU cooler ASUS M3A78-EMH HDMI (AMD 780G) AMD Athlon 5000+ It works fine, but I had troubles finding the right codecs.... still not satisfied for HD playback which occupies CPU more than 50%. I'm doing now a similar system but I just ordered the ASUS M3A78-T (AMD 790GX), want to check if it is better for HD. If you need something slimmer always from Silverstone there is the LC19, which is just 68mm, but on the other side offers only 120W power supply: http://www.silverstonetek.com/produc...=lc19&area=usa Hope this helps. Gian Piero BTW... I already asked in another thread: what is DVB Enhancer for SageTV ? I tried installing it yesterday with no success, does it need DVBDream or it works alone ? |
#3
|
|||
|
|||
Quote:
|
#4
|
||||
|
||||
I realy like to put into smallest as possible micro atx chassi. I do not want huge things
__________________
Dear Google, Please don't ruin SageTV for us!! Sage Server: [s]8xDVB-S2 with DVBE4Sage on YES DBS Israel 4W (3 virtual tuners) ,[/s] 3 x HD300 Extenders; 3 x HD200 Extender; 3 x SageTV Client; Last edited by bjkiller; 11-14-2008 at 09:44 AM. |
#5
|
|||
|
|||
The only codec I found that seems to put the load on the GPU is the Cyberlink 7. Alls the others have good looking output but run at the 50-60% mark. The Cyberlink runs at like 4-6%.
In the end I am using the ArcSoft even with the high CPU usage because the picture is better. Nothing else really runs on the box so I really dont care what it uses as long as it doesn't skip. I would like to test Cyberlink 8 but I have not found a trail with h.264 support. Comments on how it comares to the ArcSoft would be welcome. I love the Silver Stone SST-LC17-S ATX case I use for my main Sage server. It is big but there is room for a full ATX motherbords and you can have 6 interal Hard drives a DVD R/W plus a BluRay. If fits well in the Entertaimnet center about the with of a AV reciever just tall. With the right powersupply and fan it is almost silent. Last edited by SWKerr; 11-14-2008 at 11:22 AM. |
#6
|
||||
|
||||
I use the Silverstone LC20. Has the 6 hd bays and two 5.25 bays like the LC17. They come in black and silver. It's smaller than my Yamaha A/V Receiver. I could only fit 4 hds in my case due to the length of some of my cards and the sata plug placement on my mb.
Link: http://www.silverstonetek.com/produc...=lc20&area=usa
__________________
Server: SageTV 9, Win10/32, Intel DP55KG Mb, Intel QC i5 2.66GHz , 4GB 1333MHz DDR3 SDRAM, 2 Hauppauge 2255s for 4 OTA ATSC tuners, HDHRPrime w Comcast, 3 STP-HD300s 20101007-0 firmware, nVidia Shield. Java v7u55. Plugins:SD EPG, OpenDCT |
#7
|
||||
|
||||
i found nice chassi HIPER HMC-2K53A-A0 Micro ATX Media Center / HTPC Case but not sure how it's good.
__________________
Dear Google, Please don't ruin SageTV for us!! Sage Server: [s]8xDVB-S2 with DVBE4Sage on YES DBS Israel 4W (3 virtual tuners) ,[/s] 3 x HD300 Extenders; 3 x HD200 Extender; 3 x SageTV Client; |
#8
|
||||
|
||||
__________________
Big Gerr _______ Server - WHS 2011: Sage 7.1.9 - 1 x HD Prime and 2 x HDHomeRun - Intel Atom D525 1.6 GHz, Acer Easystore, RAM 4 GB, 4 x 2TB hotswap drives, 1 x 2TB USB ext Clients: 2 x PC Clients, 1 x HD300, 2 x HD-200, 1 x HD-100 DEV Client: Win 7 Ultimate 64 bit - AMD 64 x2 6000+, Gigabyte GA-MA790GP-DS4H MB, RAM 4GB, HD OS:500GB, DATA:1 x 500GB, Pace RGN STB. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sage Client Questions | camus | SageTV Software | 15 | 05-14-2012 07:00 AM |
SageTV Client: Keeping UI in Sync with MVP | sjrx0213 | SageTV Software | 3 | 02-09-2007 05:21 PM |
Which client license is in use? | Enormous | SageTV Software | 3 | 01-14-2007 06:47 PM |
SageTV Client Issues | RickD | SageTV Software | 12 | 01-28-2006 08:18 PM |
90% CPU usage from sage client! | Djinn_X | SageTV Software | 4 | 01-17-2006 12:25 PM |