New native recording patch

[TDaddy]

I received two messages saying "digital tuner stopped producing data while recording ...". These occurred at the beginning of the recording. A third message saying that the recording failed was generated an hour later.

Native log and Sage message log are attached. I did not have MPEGDEMUX log enabled during that time.

Timmy

[TDaddy]

I am getting the "No Signal" message again. This time it is on channels 135-11 and 135-16. This was with update 9 installed.

I reverted to update 7 which had previously worked on all channels but still getting No Signal on these two channels.

Timmy

[fatboy]

Still missing ITV, ITV2 and FIVE (plus not sure how many others)

These are all available in WinMC or hauppauge WinTV so it's not the tuners.

[donkey]

Originally Posted by fatboy

Still missing ITV, ITV2 and FIVE (plus not sure how many others)

These are all available in WinMC or hauppauge WinTV so it's not the tuners.

could you post your native.log? it's in sagetv directory.

[fatboy]

Please find the native log attached

[donkey]

Originally Posted by fatboy

Please find the native log attached

Do you pick up a right region for scan?
enable native.log by creating a file NATIVE_LOG.ENABLE in sagetv dierctory, rescan channel, post native.log. the current native log doesn't have all messages.

Qian

[donkey]

Originally Posted by TDaddy

I am getting the "No Signal" message again. This time it is on channels 135-11 and 135-16. This was with update 9 installed.

I reverted to update 7 which had previously worked on all channels but still getting No Signal on these two channels.

Timmy

It's fixed here http://download.sage.tv/users/qian/TSSplitter3.0.ax

Qian

[LehighBri]

Originally Posted by donkey

It's fixed here http://download.sage.tv/users/qian/TSSplitter3.0.ax

Qian

Is that the same one as in update-9? Or is that newer?

[donkey]

It's a newer version 3.0.0.34, fixed a broken code for QAM channel "phy-0-nn", and will be in the next update shortly.

Qian

[LehighBri]

Also, one other suggestion. For the update, can you list which files need to be copied to non-server clients, and which don't? Will help me as I've been installing these updates on both my server AND my clients.

[farfromuman]

The QAM tuner lost signal while recording The Office and kept killing the service every few minutes until the show was over. This made Swiss cheese out of Fringe and CSI This is the second Thu that it happened.

[TDaddy]

Qian,

I installed the new TSSplitter3.0.ax and it solved the No Signal problem. The QAM channels also tune much faster now which is a tremendous improvement.

Thanks,
Timmy

[fatboy]

new native log as requested. and yes i'm definitely selecting the correct region. (caradon / south west)

[e-t172]

I have a problem.

I was using SageTV with update 7 with no problems. Then all of a sudden, I lost sound on all channels. I can have sound again if I go into the "Audio language" menu and select another language, then select the first language again (I get sound with all languages). Problems are:

- I need to do that each time I tune into a channel. If I don't, no sound.
- Some channels don't have an "Audio language" menu (probably because there is only one). Therefore, on these channels I don't get any sound and that's all, no workaround.

I get the problem on HD (E-AC3) and SD (AC3) channels. I use ffdshow as audio decoder. ffdshow audio decoder is successfully loaded even when I don't have sound.

Update 9 doesn't seem to solve anything.

Native log (update 9) is attached. In this log I tune into a channel and do nothing for approx. 1 minute (consequently I have no sound during this minute). Then I switch audio languages to have audio.

[Fuzzy]

to go along with that, what is determined to be the primary audio stream. I've noticed lately that my local PBS station it seems to end up on the alternate audio stream. Not serious, so i haven't really gone in looking yet, so I'm not sure if it's the broadcast or the playback yet. Just thought I'd point out the strangeness.

[donkey]

Originally Posted by Fuzzy

to go along with that, what is determined to be the primary audio stream. I've noticed lately that my local PBS station it seems to end up on the alternate audio stream. Not serious, so i haven't really gone in looking yet, so I'm not sure if it's the broadcast or the playback yet. Just thought I'd point out the strangeness.

audio language, stream bit rate if two audio tracks are the same language.
and the audio type "normal, clean effects (silence), hearing impaired, visually impaired commentary"

Qian

[Fuzzy]

Originally Posted by donkey

audio language, stream bit rate if two audio tracks are the same language.
and the audio type "normal, clean effects (silence), hearing impaired, visually impaired commentary"

Qian

So does it prefer visually impaired over normal? because that is what I'm getting.

[donkey]

Originally Posted by Fuzzy

So does it prefer visually impaired over normal? because that is what I'm getting.

no, I think there is something wrong there, could you dump raw stream data?

Qian

[Fuzzy]

yeah, I'll try to get that to ya in the next day or so...

[JMTBerserker]

I was redirected to this thread because I'm trying to solve an audio drift problem. I have no clue what this "native patch" does; I'm just installing it because someone mentioned it solved their audio drift problem, and I'm doing anything I can at this point.

I tried installing update 9 and got an error when I ran TSSplitter3.0_install.bat:

LoadLibrary("TSSplitter2.0.ax") failed - This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.