HD200 wireless won't connect

[Seth]

I purchased the HD200 and wireless adapter from the Sage store and just received it yesterday. I immediately upgraded the firmware per the instructions, but haven't been able to get the wireless to connect. It sees my network & all of my neighbors' networks, but has a signal strenth of 0 for each one. When I try to connect to mine it times out. Here are some of the details:

1. WEP encryption enabled and input, MAC filtering is off
2. I have tried a fixed IP address
3. I have had success with a wired connection
4. Wireles signal strength is good on other devices (I'm using it to type this)
5. The error is that the wireless connection times out

Not sure what other details I could give you. Can anyone help?

[Seth]

I should also mention that I tried disabling the WEP security all together and it made no difference

[Seth]

I also did a little additional testing on the wireless adapter and connected it to my laptop. It worked just fine.

[DocDJ]

If you haven't already solved this: I had a similar problem, but using WPA security. Discovered that the password (in the Sage unit) was being forced to uppercase. So I made the pw in my router into UC and it connected perfectly.

[Seth]

Originally Posted by DocDJ

If you haven't already solved this: I had a similar problem, but using WPA security. Discovered that the password (in the Sage unit) was being forced to uppercase. So I made the pw in my router into UC and it connected perfectly.

No, haven't solved it yet, mostly because I've been out of town for a few days. The password in my router is in uppercase. I double checked that the first day I was messing around with it. I submitted a ticket, but I'd still love to hear suggestions.

Thanks

[Seth]

I was just looking at myt log file and noticed that the time on the log fiel for today is 6 hours from now. Can this cause a connection error? If so, how do I set teh time? I've been looking through the settings and can't find anything.